Re: [PATCH v2 3/5] dt-bindings: leds: leds-is31fl32xx: Add shutdown-gpios property

[Jun Yan <jerrysteve1101@gmail.com>]

> On 28/04/2026 04:33, Jun Yan wrote:
> > The IS31FL32XX series features an SDB shutdown pin.
> > Driving it low (active low) places the chip into hardware shutdown mode
> > for power saving, while all register contents are preserved
> > and registers are not reset.
> > 
> > Add shutdown-gpios property to describe the GPIO connected to the
> > SDB pin of IS31FL32XX series LED controllers.
> > 
> > Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
> > ---
> >  .../devicetree/bindings/leds/issl,is31fl32xx.yaml    | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
> > index 25ce67940c88..4654aa07dc63 100644
> > --- a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
> > +++ b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
> > @@ -45,6 +45,15 @@ properties:
> >        When present, the chip's PWM will operate at ~22kHz as opposed
> >        to ~3kHz to move the operating frequency out of the audible range.
> >  
> > +  shutdown-gpios:
> 
> powerdown-gpios (see gpio-consumer-common)

Thanks for the reminder.This has already been implemented in v3. 
Sorry for the late reply.

>
> > +    maxItems: 1
> 
> 
> 
> Best regards,
> Krzysztof