From: Tejun Heo <tj@kernel.org>
To: void@manifault.com, arighi@nvidia.com, changwoo@igalia.com
Cc: emil@etsalapatis.com, sched-ext@lists.linux.dev,
linux-kernel@vger.kernel.org, Tejun Heo <tj@kernel.org>
Subject: [PATCH sched_ext/for-7.2] sched_ext: Add scx_task_iter_relock() and use it in scx_root_enable_workfn()
Date: Sun, 10 May 2026 12:23:02 -1000 [thread overview]
Message-ID: <20260510222302.2614731-1-tj@kernel.org> (raw)
scx_root_enable_workfn()'s post-init block re-acquires scx_tasks_lock
briefly via a scoped_guard() for the tid hash insertion. c941d7391f25
("sched_ext: Close root-enable vs sched_ext_dead() race with
SCX_TASK_INIT_BEGIN") on for-7.1-fixes adds a post-init DEAD recheck that
holds the task's rq lock across the state-machine updates in the same
region. A naive merge would acquire scx_tasks_lock while the rq lock is
held, inverting the iter's outer/inner order (scx_tasks_lock then rq lock).
Add scx_task_iter_relock(iter, p), the counterpart to
scx_task_iter_unlock(), that re-acquires scx_tasks_lock and, if @p is
non-NULL, @p's rq lock. The locks are tracked in @iter so subsequent
iteration releases them.
Use it in scx_root_enable_workfn()'s post-init block and drop the
now-redundant scoped_guard on the hash insertion. The post-init region now
runs with both scx_tasks_lock and the task's rq lock held across the
state-machine updates and the hash insert.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
Applied to sched_ext/for-7.2 to resolve the merge conflict from
for-7.1-fixes.
kernel/sched/ext.c | 37 +++++++++++++++++++++++++++++--------
1 file changed, 29 insertions(+), 8 deletions(-)
diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c
index b685f45b4fd0..d23707d88cfb 100644
--- a/kernel/sched/ext.c
+++ b/kernel/sched/ext.c
@@ -902,6 +902,24 @@ static void __scx_task_iter_maybe_relock(struct scx_task_iter *iter)
}
}
+/**
+ * scx_task_iter_relock - Re-acquire scx_tasks_lock and, optionally, @p's rq
+ * @iter: iterator to relock
+ * @p: task whose rq to lock, or %NULL for scx_tasks_lock only
+ *
+ * Counterpart to scx_task_iter_unlock(). Locking @p's rq is optional. Once
+ * re-acquired, both locks are managed by the iterator from here on.
+ */
+static void scx_task_iter_relock(struct scx_task_iter *iter,
+ struct task_struct *p)
+{
+ __scx_task_iter_maybe_relock(iter);
+ if (p) {
+ iter->rq = task_rq_lock(p, &iter->rf);
+ iter->locked_task = p;
+ }
+}
+
/**
* scx_task_iter_stop - Stop a task iteration and unlock scx_tasks_lock
* @iter: iterator to exit
@@ -7072,19 +7090,22 @@ static void scx_root_enable_workfn(struct kthread_work *work)
goto err_disable_unlock_all;
}
+ /*
+ * Hold both scx_tasks_lock and @p's rq across the state machine
+ * updates and the tid hash insert below.
+ */
+ scx_task_iter_relock(&sti, p);
+
scx_set_task_sched(p, sch);
scx_set_task_state(p, SCX_TASK_READY);
/*
- * Insert into the tid hash under scx_tasks_lock so we can't
- * race sched_ext_dead() and leave a stale entry for an already
- * exited task.
+ * Insert into the tid hash. scx_tasks_lock is held by the iter;
+ * list_empty() guards against sched_ext_dead() having taken @p
+ * off the list while init ran unlocked.
*/
- if (scx_tid_to_task_enabled()) {
- guard(raw_spinlock_irq)(&scx_tasks_lock);
- if (!list_empty(&p->scx.tasks_node))
- scx_tid_hash_insert(p);
- }
+ if (scx_tid_to_task_enabled() && !list_empty(&p->scx.tasks_node))
+ scx_tid_hash_insert(p);
put_task_struct(p);
}
--
2.54.0
next reply other threads:[~2026-05-10 22:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-10 22:23 Tejun Heo [this message]
2026-05-10 22:45 ` [PATCH v2 sched_ext/for-7.2] sched_ext: Add scx_task_iter_relock() and use it in scx_root_enable_workfn() Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260510222302.2614731-1-tj@kernel.org \
--to=tj@kernel.org \
--cc=arighi@nvidia.com \
--cc=changwoo@igalia.com \
--cc=emil@etsalapatis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sched-ext@lists.linux.dev \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox