[PATCH v2 09/10] iio: light: opt3001: switch driver to managed resources

[Joshua Crofts via B4 Relay <devnull+joshua.crofts1.gmail.com@kernel.org>]

From: Joshua Crofts <joshua.crofts1@gmail.com>

Move the driver to use devm_* functions to automate resource
management and simplify error handling. This also allows removal
of the opt3001_remove() function.

Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
---
 drivers/iio/light/opt3001.c | 75 +++++++++++++++++++++++----------------------
 1 file changed, 39 insertions(+), 36 deletions(-)

diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 39ea60c0af2c1ec7473d49b73778cac1f9bb6086..1319e5941b66bd82e4dc2badf5ea27cacbcfd54a 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -702,6 +702,31 @@ static int opt3001_read_id(struct opt3001 *opt)
 	return 0;
 }
 
+static void opt3001_power_off(void *data)
+{
+	struct opt3001 *opt = data;
+	struct i2c_client *client = opt->client;
+	struct device *dev = opt->dev;
+
+	int ret;
+	u16 reg;
+
+	ret = i2c_smbus_read_word_swapped(client, OPT3001_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(dev, "failed to read register %02x\n",
+			OPT3001_CONFIGURATION);
+		return;
+	}
+
+	reg = ret;
+	opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
+
+	ret = i2c_smbus_write_word_swapped(client, OPT3001_CONFIGURATION, reg);
+	if (ret < 0)
+		dev_err(dev, "failed to write to register %02x\n",
+			OPT3001_CONFIGURATION);
+}
+
 static int opt3001_configure(struct opt3001 *opt)
 {
 	struct i2c_client *client = opt->client;
@@ -740,6 +765,11 @@ static int opt3001_configure(struct opt3001 *opt)
 		return dev_err_probe(dev, ret, "failed to write register %02x\n",
 				     OPT3001_CONFIGURATION);
 
+	ret = devm_add_action_or_reset(dev, opt3001_power_off, opt);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to register power off function\n");
+
 	ret = i2c_smbus_read_word_swapped(client, OPT3001_LOW_LIMIT);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to read register %02x\n",
@@ -834,7 +864,10 @@ static int opt3001_probe(struct i2c_client *client)
 	opt->dev = dev;
 	opt->chip_info = i2c_get_match_data(client);
 
-	mutex_init(&opt->lock);
+	ret = devm_mutex_init(dev, &opt->lock);
+	if (ret)
+		return ret;
+
 	init_waitqueue_head(&opt->result_ready_queue);
 	i2c_set_clientdata(client, iio);
 
@@ -856,13 +889,12 @@ static int opt3001_probe(struct i2c_client *client)
 
 	/* Make use of INT pin only if valid IRQ no. is given */
 	if (irq > 0) {
-		ret = request_threaded_irq(irq, NULL, opt3001_irq,
-					   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-					   "opt3001", iio);
+		ret = devm_request_threaded_irq(dev, irq, NULL, opt3001_irq,
+						IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+						"opt3001", iio);
 		if (ret)
-			return dev_err_probe(dev, ret,
-					     "failed to request IRQ #%d\n",
-					     irq);
+			return ret;
+
 		opt->use_irq = true;
 	} else {
 		dev_dbg(dev, "enabling interrupt-less operation\n");
@@ -876,34 +908,6 @@ static int opt3001_probe(struct i2c_client *client)
 	return 0;
 }
 
-static void opt3001_remove(struct i2c_client *client)
-{
-	struct iio_dev *iio = i2c_get_clientdata(client);
-	struct opt3001 *opt = iio_priv(iio);
-	struct device *dev = opt->dev;
-	int ret;
-	u16 reg;
-
-	if (opt->use_irq)
-		free_irq(client->irq, iio);
-
-	ret = i2c_smbus_read_word_swapped(client, OPT3001_CONFIGURATION);
-	if (ret < 0) {
-		dev_err(dev, "failed to read register %02x\n",
-			OPT3001_CONFIGURATION);
-		return;
-	}
-
-	reg = ret;
-	opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
-
-	ret = i2c_smbus_write_word_swapped(client, OPT3001_CONFIGURATION, reg);
-	if (ret < 0) {
-		dev_err(dev, "failed to write register %02x\n",
-			OPT3001_CONFIGURATION);
-	}
-}
-
 static const struct opt3001_chip_info opt3001_chip_information = {
 	.channels = &opt3001_channels,
 	.chan_type = IIO_LIGHT,
@@ -942,7 +946,6 @@ MODULE_DEVICE_TABLE(of, opt3001_of_match);
 
 static struct i2c_driver opt3001_driver = {
 	.probe = opt3001_probe,
-	.remove = opt3001_remove,
 	.id_table = opt3001_id,
 
 	.driver = {

-- 
2.47.3