[PATCH] staging: sm750fb: add missing FBINFO_STATE_RUNNING checks in copyarea and imageblit

[Chhabilal Dangal <yogeshdangal66@gmail.com>]

lynxfb_ops_fillrect() correctly checks info->state before accessing the hardware 2D accelerator, returning early if the framebuffer is not in FBINFO_STATE_RUNNING state. However, lynxfb_ops_copyarea() and lynxfb_ops_imageblit() omit this guard despite using the same hardware accelerator through identical code paths.

Without this check, the 2D engine could be accessed while the device is suspended (state set to FBINFO_STATE_SUSPENDED via fb_set_suspend()), potentially causing bus errors or system hangs.

Add the missing state checks to both functions, matching the existing pattern in lynxfb_ops_fillrect().

Signed-off-by: Chhabilal Dangal <yogeshdangal66@gmail.com>
---
 drivers/staging/sm750fb/sm750.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 9f3e3d37e..025ac8fe3 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -204,6 +204,9 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
 	struct sm750_dev *sm750_dev;
 	unsigned int base, pitch, bpp;
 
+	if (info->state != FBINFO_STATE_RUNNING)
+		return;
+
 	par = info->par;
 	sm750_dev = par->dev;
 
@@ -239,6 +242,9 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
 	struct lynxfb_par *par;
 	struct sm750_dev *sm750_dev;
 
+	if (info->state != FBINFO_STATE_RUNNING)
+		return;
+
 	par = info->par;
 	sm750_dev = par->dev;
 	/*
-- 
2.54.0