From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Kiryl Shutsemau <kas@kernel.org>,
David Woodhouse <dwmw2@infradead.org>,
Paul Durrant <paul@xen.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>,
Rick Edgecombe <rick.p.edgecombe@intel.com>,
kvm@vger.kernel.org, x86@kernel.org, linux-coco@lists.linux.dev,
linux-kernel@vger.kernel.org, Yosry Ahmed <yosry@kernel.org>,
Kai Huang <kai.huang@intel.com>,
Binbin Wu <binbin.wu@linux.intel.com>
Subject: [PATCH v2 13/15] KVM: x86: Move update_cr8_intercept() to lapic.c
Date: Thu, 14 May 2026 14:53:53 -0700 [thread overview]
Message-ID: <20260514215355.1648463-14-seanjc@google.com> (raw)
In-Reply-To: <20260514215355.1648463-1-seanjc@google.com>
Move update_cr8_intercept() to lapic.c so that it's globally visible
in anticipation of extracting most of the register-specific code out of
x86.c and into a new compilation unit. Opportunistically prefix the
helper kvm_lapic_ to make its role/scope more obvious.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/lapic.c | 26 ++++++++++++++++++++++++++
arch/x86/kvm/lapic.h | 1 +
arch/x86/kvm/x86.c | 34 +++-------------------------------
3 files changed, 30 insertions(+), 31 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index d8dbfb107bfb..27cca31308bd 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2744,6 +2744,32 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
return (tpr & 0xf0) >> 4;
}
+void kvm_lapic_update_cr8_intercept(struct kvm_vcpu *vcpu)
+{
+ int max_irr, tpr;
+
+ if (!kvm_x86_ops.update_cr8_intercept)
+ return;
+
+ if (!lapic_in_kernel(vcpu))
+ return;
+
+ if (vcpu->arch.apic->apicv_active)
+ return;
+
+ if (!vcpu->arch.apic->vapic_addr)
+ max_irr = kvm_lapic_find_highest_irr(vcpu);
+ else
+ max_irr = -1;
+
+ if (max_irr != -1)
+ max_irr >>= 4;
+
+ tpr = kvm_lapic_get_cr8(vcpu);
+
+ kvm_x86_call(update_cr8_intercept)(vcpu, tpr, max_irr);
+}
+
static void __kvm_apic_set_base(struct kvm_vcpu *vcpu, u64 value)
{
u64 old_value = vcpu->arch.apic_base;
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 274885af4ebc..533581d06151 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -100,6 +100,7 @@ int kvm_apic_accept_events(struct kvm_vcpu *vcpu);
void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event);
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
+void kvm_lapic_update_cr8_intercept(struct kvm_vcpu *vcpu);
void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu);
void kvm_apic_set_version(struct kvm_vcpu *vcpu);
void kvm_apic_after_set_mcg_cap(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index b958521bc81f..1113a31978dd 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -128,7 +128,6 @@ static u64 __read_mostly efer_reserved_bits = ~((u64)EFER_SCE);
KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST | \
KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST)
-static void update_cr8_intercept(struct kvm_vcpu *vcpu);
static void process_nmi(struct kvm_vcpu *vcpu);
static void __kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
static void store_regs(struct kvm_vcpu *vcpu);
@@ -5342,7 +5341,7 @@ static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
r = kvm_apic_set_state(vcpu, s);
if (r)
return r;
- update_cr8_intercept(vcpu);
+ kvm_lapic_update_cr8_intercept(vcpu);
return 0;
}
@@ -10583,33 +10582,6 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
kvm_run->flags |= KVM_RUN_X86_GUEST_MODE;
}
-static void update_cr8_intercept(struct kvm_vcpu *vcpu)
-{
- int max_irr, tpr;
-
- if (!kvm_x86_ops.update_cr8_intercept)
- return;
-
- if (!lapic_in_kernel(vcpu))
- return;
-
- if (vcpu->arch.apic->apicv_active)
- return;
-
- if (!vcpu->arch.apic->vapic_addr)
- max_irr = kvm_lapic_find_highest_irr(vcpu);
- else
- max_irr = -1;
-
- if (max_irr != -1)
- max_irr >>= 4;
-
- tpr = kvm_lapic_get_cr8(vcpu);
-
- kvm_x86_call(update_cr8_intercept)(vcpu, tpr, max_irr);
-}
-
-
int kvm_check_nested_events(struct kvm_vcpu *vcpu)
{
if (kvm_test_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
@@ -11350,7 +11322,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
kvm_x86_call(enable_irq_window)(vcpu);
if (kvm_lapic_enabled(vcpu)) {
- update_cr8_intercept(vcpu);
+ kvm_lapic_update_cr8_intercept(vcpu);
kvm_lapic_sync_to_vapic(vcpu);
}
}
@@ -12496,7 +12468,7 @@ static int __set_sregs_common(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs,
kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
- update_cr8_intercept(vcpu);
+ kvm_lapic_update_cr8_intercept(vcpu);
/* Older userspace won't unhalt the vcpu on reset. */
if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
--
2.54.0.563.g4f69b47b94-goog
next prev parent reply other threads:[~2026-05-14 21:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-14 21:53 [PATCH v2 00/15] KVM: x86: Clean up kvm_<reg>_{read,write}() mess Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 01/15] KVM: SVM: Truncate INVLPGA address in compatibility mode Sean Christopherson
2026-05-15 6:36 ` Binbin Wu
2026-05-14 21:53 ` [PATCH v2 02/15] KVM: x86/xen: Bug the VM if 32-bit KVM observes a 64-bit mode hypercall Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 03/15] KVM: x86/xen: Don't truncate RAX when handling hypercall from protected guest Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 04/15] KVM: VMX: Read 32-bit GPR values for ENCLS instructions outside of 64-bit mode Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 05/15] KVM: x86: Trace hypercall register *after* truncating values for 32-bit Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 06/15] KVM: x86: Rename kvm_cache_regs.h => regs.h Sean Christopherson
2026-05-14 22:28 ` Yosry Ahmed
2026-05-14 21:53 ` [PATCH v2 07/15] KVM: x86: Move inlined CR and DR helpers from x86.h to regs.h Sean Christopherson
2026-05-14 22:30 ` Yosry Ahmed
2026-05-14 21:53 ` [PATCH v2 08/15] KVM: x86: Add mode-aware versions of kvm_<reg>_{read,write}() helpers Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 09/15] KVM: x86: Drop non-raw kvm_<reg>_write() helpers Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 10/15] KVM: nSVM: Use kvm_rax_read() now that it's mode-aware Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 11/15] Revert "KVM: VMX: Read 32-bit GPR values for ENCLS instructions outside of 64-bit mode" Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 12/15] KVM: x86: Harden is_64_bit_hypercall() against bugs on 32-bit kernels Sean Christopherson
2026-05-14 21:53 ` Sean Christopherson [this message]
2026-05-14 21:53 ` [PATCH v2 14/15] KVM: x86: Move kvm_pv_async_pf_enabled() to x86.h (as an inline) Sean Christopherson
2026-05-14 21:53 ` [PATCH v2 15/15] KVM: x86: Move the bulk of register specific code from x86.c to regs.c Sean Christopherson
2026-05-14 22:31 ` [PATCH v2 00/15] KVM: x86: Clean up kvm_<reg>_{read,write}() mess Yosry Ahmed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260514215355.1648463-14-seanjc@google.com \
--to=seanjc@google.com \
--cc=binbin.wu@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=kai.huang@intel.com \
--cc=kas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=paul@xen.org \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=vkuznets@redhat.com \
--cc=x86@kernel.org \
--cc=yosry@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox