Re: [PATCH] gpib: cb7210: Fix region leak when request_irq fails

[Greg KH <gregkh@linuxfoundation.org>]

On Fri, May 15, 2026 at 03:39:52PM +0800, Hongling Zeng wrote:
> When request_irq() fails, the region allocated by request_region()
> is not released. Fix this by adding an error handling path with
> proper goto labels to release the region.
> 
> Fixes: 82e3508046f9b ("gpib: cb7210: add isa support module")
> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
> ---
>  drivers/gpib/cb7210/cb7210.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpib/cb7210/cb7210.c b/drivers/gpib/cb7210/cb7210.c
> index 6dd8637c5964..7b0af517cf14 100644
> --- a/drivers/gpib/cb7210/cb7210.c
> +++ b/drivers/gpib/cb7210/cb7210.c
> @@ -1049,7 +1049,8 @@ static int cb_isa_attach(struct gpib_board *board, const struct gpib_board_confi
>  	if (!request_region(config->ibbase, cb7210_iosize, DRV_NAME)) {
>  		dev_err(board->gpib_dev, "ioports starting at 0x%x are already in use\n",
>  			config->ibbase);
> -		return -EBUSY;
> +		retval = -EBUSY;
> +		goto err_release_region;
>  	}
>  	nec_priv->iobase = config->ibbase;
>  	cb_priv->fifo_iobase = nec7210_iobase(cb_priv);
> @@ -1062,11 +1063,16 @@ static int cb_isa_attach(struct gpib_board *board, const struct gpib_board_confi
>  	// install interrupt handler
>  	if (request_irq(config->ibirq, cb7210_interrupt, isr_flags, DRV_NAME, board)) {
>  		dev_err(board->gpib_dev, "failed to obtain IRQ %d\n", config->ibirq);
> -		return -EBUSY;
> +		ret = -EBUSY;
> +		goto err_release_region;
>  	}
>  	cb_priv->irq = config->ibirq;
>  
>  	return cb7210_init(cb_priv, board);
> +
> +err_release_region:
> +	release_region(nec7210_iobase(cb_priv), cb7210_iosize);
> +	return retval;
>  }
>  
>  static void cb_isa_detach(struct gpib_board *board)
> -- 
> 2.25.1
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot