[PATCH v2] iio: chemical: scd30: Cleanup initializations in scd30_float_to_fp()

[Maxwell Doose <m32285159@gmail.com>]

Include linux/bitfield.h for FIELD_GET().

Create new macros for bit manipulation in combination with manual bit
manipulation being replaced with FIELD_GET().

The current variable declaration and initializations are barely readable
and use comma separations across multiple lines. Refactor the
initializations so that mantissa and exp have separate declarations and
sign gets initialized later.

Signed-off-by: Maxwell Doose <m32285159@gmail.com>
---
v2:
 - Added new floating point macro constants per Jonathan's suggestion.
 - Included linux/bitfield.h to use FIELD_GET() since Jonathan also
   recommended its use.

 drivers/iio/chemical/scd30_core.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
index 8dbba9a7c426..db5cc295aeab 100644
--- a/drivers/iio/chemical/scd30_core.c
+++ b/drivers/iio/chemical/scd30_core.c
@@ -4,6 +4,8 @@
  *
  * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com>
  */
+
+#include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/cleanup.h>
 #include <linux/completion.h>
@@ -43,6 +45,11 @@
 #define SCD30_TEMP_OFFSET_MAX 655360
 #define SCD30_EXTRA_TIMEOUT_PER_S 250
 
+/* Floating point arithmetic macros */
+#define SCD30_FLOAT_MANTISSA_MSK GENMASK(22, 0)
+#define SCD30_FLOAT_EXP_MSK GENMASK(30, 23)
+#define SCD30_FLOAT_SIGN_MSK BIT(31)
+
 enum {
 	SCD30_CONC,
 	SCD30_TEMP,
@@ -89,10 +96,15 @@ static int scd30_reset(struct scd30_state *state)
 /* simplified float to fixed point conversion with a scaling factor of 0.01 */
 static int scd30_float_to_fp(int float32)
 {
-	int fraction, shift,
-	    mantissa = float32 & GENMASK(22, 0),
-	    sign = (float32 & BIT(31)) ? -1 : 1,
-	    exp = (float32 & ~BIT(31)) >> 23;
+	int fraction, shift, sign;
+	int mantissa = FIELD_GET(SCD30_FLOAT_MANTISSA_MSK, float32);
+	int exp = FIELD_GET(SCD30_FLOAT_EXP_MSK, float32);
+
+	/* Determine sign of received float based on IEEE 754 standard */
+	if (float32 & SCD30_FLOAT_SIGN_MSK)
+		sign = -1;
+	else
+		sign = 1;
 
 	/* special case 0 */
 	if (!exp && !mantissa)
-- 
2.54.0