From: srini@kernel.org
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org,
Horatiu Vultur <horatiu.vultur@microchip.com>,
Robert Marko <robert.marko@sartura.hr>,
Srinivas Kandagatla <srini@kernel.org>
Subject: [PATCH 08/14] nvmem: lan9662-otp: add support for LAN969x
Date: Sat, 30 May 2026 21:53:27 +0100 [thread overview]
Message-ID: <20260530205333.117458-9-srini@kernel.org> (raw)
In-Reply-To: <20260530205333.117458-1-srini@kernel.org>
From: Horatiu Vultur <horatiu.vultur@microchip.com>
Microchip LAN969x provides OTP with the same control logic, only the size
differs as LAN969x has 16KB of OTP instead of 8KB like on LAN966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
---
drivers/nvmem/Kconfig | 2 +-
drivers/nvmem/lan9662-otpc.c | 12 +++++++++---
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 74ddbd0f79b0..78b648e14727 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -138,7 +138,7 @@ config NVMEM_JZ4780_EFUSE
config NVMEM_LAN9662_OTPC
tristate "Microchip LAN9662 OTP controller support"
- depends on SOC_LAN966 || COMPILE_TEST
+ depends on SOC_LAN966 || ARCH_LAN969X || COMPILE_TEST
depends on HAS_IOMEM
help
This driver enables the OTP controller available on Microchip LAN9662
diff --git a/drivers/nvmem/lan9662-otpc.c b/drivers/nvmem/lan9662-otpc.c
index 56fc19f092a7..62d1d6381bf8 100644
--- a/drivers/nvmem/lan9662-otpc.c
+++ b/drivers/nvmem/lan9662-otpc.c
@@ -27,7 +27,6 @@
#define OTP_OTP_STATUS_OTP_CPUMPEN BIT(1)
#define OTP_OTP_STATUS_OTP_BUSY BIT(0)
-#define OTP_MEM_SIZE 8192
#define OTP_SLEEP_US 10
#define OTP_TIMEOUT_US 500000
@@ -176,7 +175,6 @@ static struct nvmem_config otp_config = {
.word_size = 1,
.reg_read = lan9662_otp_read,
.reg_write = lan9662_otp_write,
- .size = OTP_MEM_SIZE,
};
static int lan9662_otp_probe(struct platform_device *pdev)
@@ -196,6 +194,7 @@ static int lan9662_otp_probe(struct platform_device *pdev)
otp_config.priv = otp;
otp_config.dev = dev;
+ otp_config.size = (uintptr_t) device_get_match_data(dev);
nvmem = devm_nvmem_register(dev, &otp_config);
@@ -203,7 +202,14 @@ static int lan9662_otp_probe(struct platform_device *pdev)
}
static const struct of_device_id lan9662_otp_match[] = {
- { .compatible = "microchip,lan9662-otpc", },
+ {
+ .compatible = "microchip,lan9662-otpc",
+ .data = (const void *) SZ_8K,
+ },
+ {
+ .compatible = "microchip,lan9691-otpc",
+ .data = (const void *) SZ_16K,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, lan9662_otp_match);
--
2.53.0
next prev parent reply other threads:[~2026-05-30 20:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-30 20:53 [PATCH 00/14] nvmem: patches for 7.2 srini
2026-05-30 20:53 ` [PATCH 01/14] dt-bindings: nvmem: qfprom: Add glymur compatible srini
2026-05-30 20:53 ` [PATCH 02/14] nvmem: rockchip-otp: alloc clks with main struct srini
2026-05-30 20:53 ` [PATCH 03/14] nvmem: core: Default to read-only if wp-gpios present srini
2026-05-30 20:53 ` [PATCH 04/14] dt-bindings: nvmem: qfprom: qcom: Add Hawi compatible srini
2026-05-30 20:53 ` [PATCH 05/14] nvmem: nintendo-otp: Use of_device_get_match_data() srini
2026-05-30 20:53 ` [PATCH 06/14] dt-bindings: nvmem: qfprom: Add Milos compatible srini
2026-05-30 20:53 ` [PATCH 07/14] dt-bindings: nvmem: lan9662-otpc: Add LAN969x series srini
2026-05-30 20:53 ` srini [this message]
2026-05-30 20:53 ` [PATCH 09/14] dt-bindings: nvmem: qcom,qfprom: Add Shikra compatible srini
2026-05-30 20:53 ` [PATCH 10/14] dt-bindings: nvmem: airoha: add SMC eFuses schema srini
2026-05-30 20:53 ` [PATCH 11/14] nvmem: airoha: Add support for SMC eFUSE srini
2026-05-30 20:53 ` [PATCH 12/14] nvmem: qcom: Unify user-visible "Qualcomm" name srini
2026-05-30 20:53 ` [PATCH 13/14] nvmem: cleanup dead code in Kconfig srini
2026-05-30 20:53 ` [PATCH 14/14] nvmem: layouts: u-boot-env: check earlier for ethaddr length srini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260530205333.117458-9-srini@kernel.org \
--to=srini@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=horatiu.vultur@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robert.marko@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox