From: David Carlier <devnexen@gmail.com>
To: danishanwar@ti.com, rogerq@kernel.org, andrew+netdev@lunn.ch,
netdev@vger.kernel.org
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, horms@kernel.org, m-malladi@ti.com,
hawk@kernel.org, john.fastabend@gmail.com, sdf@fomichev.me,
ast@kernel.org, daniel@iogearbox.net, bpf@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
David Carlier <devnexen@gmail.com>
Subject: [PATCH net v2] net: ti: icssg-prueth: fix XDP_TX from the AF_XDP zero-copy RX path
Date: Tue, 23 Jun 2026 12:22:25 +0100 [thread overview]
Message-ID: <20260623112225.303930-1-devnexen@gmail.com> (raw)
On XDP_TX from the zero-copy RX path, emac_run_xdp() converts the xsk
buffer via xdp_convert_zc_to_xdp_frame(), which clones the data into a
fresh MEM_TYPE_PAGE_ORDER0 page that is not DMA mapped. Transmitting it
as PRUETH_TX_BUFF_TYPE_XDP_TX derives the DMA address with
page_pool_get_dma_addr(), reading an uninitialized page->dma_addr, so
the device DMAs from a bogus address (corrupt TX, or an IOMMU fault).
Pick the TX buffer type from the frame's memory type: keep
PRUETH_TX_BUFF_TYPE_XDP_TX for page_pool frames and use
PRUETH_TX_BUFF_TYPE_XDP_NDO for the cloned zero-copy frame, which is then
DMA mapped through the NDO path and unmapped on completion.
While at it, fix the page_pool XDP_TX completion path. A
PRUETH_TX_BUFF_TYPE_XDP_TX frame carries a page_pool-owned DMA mapping
(established against rx_chn->dma_dev), yet prueth_xmit_free()
unconditionally calls dma_unmap_single() on it with tx_chn->dma_dev,
tearing down a mapping the driver does not own; xdp_return_frame()
already recycles the page back to the pool. Tag such frames with a
dedicated PRUETH_SWDATA_XDPF_TX type so the completion path skips the
unmap, the same way PRUETH_SWDATA_XSK buffers are handled.
Fixes: 7a64bb388df3 ("net: ti: icssg-prueth: Add AF_XDP zero copy for RX")
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
---
v2:
- fold in the page_pool XDP_TX completion-path unmap fix raised by
Meghana Malladi: tag page_pool TX frames with PRUETH_SWDATA_XDPF_TX
so prueth_xmit_free() skips dma_unmap_single() on a pool-owned
mapping; xdp_return_frame() already recycles the page.
- add Fixes: 62aa3246f462 for that path.
- no change to the original zero-copy fix.
v1: https://lore.kernel.org/netdev/20260620213756.87499-1-devnexen@gmail.com
drivers/net/ethernet/ti/icssg/icssg_common.c | 20 +++++++++++++++++---
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 1 +
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
index 82ddef9c17d5..96c8bf5ef671 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_common.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
@@ -185,7 +185,7 @@ void prueth_xmit_free(struct prueth_tx_chn *tx_chn,
first_desc = desc;
next_desc = first_desc;
swdata = cppi5_hdesc_get_swdata(first_desc);
- if (swdata->type == PRUETH_SWDATA_XSK)
+ if (swdata->type == PRUETH_SWDATA_XSK || swdata->type == PRUETH_SWDATA_XDPF_TX)
goto free_pool;
cppi5_hdesc_get_obuf(first_desc, &buf_dma, &buf_dma_len);
@@ -259,6 +259,7 @@ int emac_tx_complete_packets(struct prueth_emac *emac, int chn,
napi_consume_skb(skb, budget);
break;
case PRUETH_SWDATA_XDPF:
+ case PRUETH_SWDATA_XDPF_TX:
xdpf = swdata->data.xdpf;
dev_sw_netstats_tx_add(ndev, 1, xdpf->len);
total_bytes += xdpf->len;
@@ -769,7 +770,8 @@ u32 emac_xmit_xdp_frame(struct prueth_emac *emac,
k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
cppi5_hdesc_attach_buf(first_desc, buf_dma, xdpf->len, buf_dma, xdpf->len);
swdata = cppi5_hdesc_get_swdata(first_desc);
- swdata->type = PRUETH_SWDATA_XDPF;
+ swdata->type = buff_type == PRUETH_TX_BUFF_TYPE_XDP_TX ?
+ PRUETH_SWDATA_XDPF_TX : PRUETH_SWDATA_XDPF;
swdata->data.xdpf = xdpf;
/* Report BQL before sending the packet */
@@ -804,6 +806,7 @@ EXPORT_SYMBOL_GPL(emac_xmit_xdp_frame);
*/
static u32 emac_run_xdp(struct prueth_emac *emac, struct xdp_buff *xdp, u32 *len)
{
+ enum prueth_tx_buff_type tx_buff_type;
struct net_device *ndev = emac->ndev;
struct netdev_queue *netif_txq;
int cpu = smp_processor_id();
@@ -826,11 +829,21 @@ static u32 emac_run_xdp(struct prueth_emac *emac, struct xdp_buff *xdp, u32 *len
goto drop;
}
+ /* In AF_XDP zero-copy mode xdp_convert_buff_to_frame()
+ * clones the xsk buffer into a fresh MEM_TYPE_PAGE_ORDER0
+ * page that is not DMA mapped. Such a frame must be mapped
+ * via the NDO path; only a page pool-backed frame already
+ * carries a usable page_pool DMA address.
+ */
+ tx_buff_type = xdpf->mem_type == MEM_TYPE_PAGE_POOL ?
+ PRUETH_TX_BUFF_TYPE_XDP_TX :
+ PRUETH_TX_BUFF_TYPE_XDP_NDO;
+
q_idx = cpu % emac->tx_ch_num;
netif_txq = netdev_get_tx_queue(ndev, q_idx);
__netif_tx_lock(netif_txq, cpu);
result = emac_xmit_xdp_frame(emac, xdpf, q_idx,
- PRUETH_TX_BUFF_TYPE_XDP_TX);
+ tx_buff_type);
__netif_tx_unlock(netif_txq);
if (result == ICSSG_XDP_CONSUMED) {
ndev->stats.tx_dropped++;
@@ -1395,6 +1408,7 @@ void prueth_tx_cleanup(void *data, dma_addr_t desc_dma)
dev_kfree_skb_any(skb);
break;
case PRUETH_SWDATA_XDPF:
+ case PRUETH_SWDATA_XDPF_TX:
xdpf = swdata->data.xdpf;
xdp_return_frame(xdpf);
break;
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index df93d15c5b78..00bb760d68a9 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -153,6 +153,7 @@ enum prueth_swdata_type {
PRUETH_SWDATA_CMD,
PRUETH_SWDATA_XDPF,
PRUETH_SWDATA_XSK,
+ PRUETH_SWDATA_XDPF_TX,
};
enum prueth_tx_buff_type {
--
2.53.0
reply other threads:[~2026-06-23 11:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260623112225.303930-1-devnexen@gmail.com \
--to=devnexen@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=danishanwar@ti.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=horms@kernel.org \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m-malladi@ti.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rogerq@kernel.org \
--cc=sdf@fomichev.me \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox