From: Jiayuan Chen <jiayuan.chen@linux.dev>
To: damon@lists.linux.dev
Cc: jiayuan.chen@shopee.com, Jiayuan Chen <jiayuan.chen@linux.dev>,
SeongJae Park <sj@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Shu Anzai <shu17az@gmail.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] mm/damon/core: split a fraction of regions when nr_regions exceeds max/2
Date: Fri, 26 Jun 2026 16:58:37 +0800 [thread overview]
Message-ID: <20260626085851.70754-2-jiayuan.chen@linux.dev> (raw)
In-Reply-To: <20260626085851.70754-1-jiayuan.chen@linux.dev>
From: Jiayuan Chen <jiayuan.chen@shopee.com>
kdamond_split_regions() returns early when nr_regions is above
max_nr_regions / 2, leaving internal access variation inside a large
region undetected.
Such a layout is common with damon-paddr on hugepage workloads or
damon-vaddr on processes with a large anonymous mmap.
For example, with max_nr_regions == 1500, a target may end up with
799 small alternating-temperature regions plus one large region that
absorbed a uniformly-accessed range during an earlier merge:
H:hot
C:cold
r1 r2 r3 r800
HHHHHH|CCCCCC|HHHHHH|...|HHHHHH..........................|
nr_regions = 800 > max_nr_regions / 2 = 750
If a cold subarea later emerges inside r800:
r1 r2 r3 r800
HHHHHH|CCCCCC|HHHHHH|...|HHHHHH........CCCCCC.............|
The small regions cannot merge with each other (different access
counts), so the budget stays full. r800 cannot be split because
nr_regions > max_nr_regions / 2 causes an early return. The cold
subarea is never discovered.
When nr_regions is above max_nr_regions / 2 but still under the
maximum, split only a fraction of the regions instead of returning.
One region in every 'max_nr_regions / budget' regions is split, where
budget is the remaining room (max_nr_regions - nr_regions), starting
from a rotating offset so different regions get picked over time. The
fraction shrinks as the budget shrinks, so the region count keeps
refining while approaching max_nr_regions smoothly rather than
overshooting it. An unnecessary split is reverted by the next
kdamond_merge_regions().
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
---
mm/damon/core.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 5 deletions(-)
diff --git a/mm/damon/core.c b/mm/damon/core.c
index d0cbfb6d1e4c..26a2cdb935f5 100644
--- a/mm/damon/core.c
+++ b/mm/damon/core.c
@@ -3712,6 +3712,37 @@ static void damon_split_regions_of(struct damon_ctx *ctx,
}
}
+/* Split one in every @split_step regions into two, from a rotating offset */
+static void damon_split_some_regions(struct damon_ctx *ctx,
+ unsigned long split_step)
+{
+ static unsigned long rotation;
+ struct damon_target *t;
+ struct damon_region *r, *next;
+ unsigned long offset = rotation++ % split_step;
+ unsigned long idx = 0;
+
+ damon_for_each_target(t, ctx) {
+ damon_for_each_region_safe(r, next, t) {
+ unsigned long sz_region, sz_sub;
+
+ if (idx++ % split_step != offset)
+ continue;
+ sz_region = damon_sz_region(r);
+ if (sz_region < 2 * ctx->min_region_sz)
+ continue;
+
+ sz_sub = ALIGN_DOWN(damon_rand(ctx, 1, 10) *
+ sz_region / 10, ctx->min_region_sz);
+ /* Do not allow blank region */
+ if (sz_sub == 0 || sz_sub >= sz_region)
+ continue;
+
+ damon_split_region_at(t, r, sz_sub);
+ }
+ }
+}
+
/*
* Split every target region into randomly-sized small regions
*
@@ -3725,25 +3756,33 @@ static void damon_split_regions_of(struct damon_ctx *ctx,
static void kdamond_split_regions(struct damon_ctx *ctx)
{
struct damon_target *t;
- unsigned int nr_regions = 0;
- static unsigned int last_nr_regions;
+ unsigned long nr_regions = 0;
+ unsigned long max_nr_regions = ctx->attrs.max_nr_regions;
+ static unsigned long last_nr_regions;
int nr_subregions = 2;
damon_for_each_target(t, ctx)
nr_regions += damon_nr_regions(t);
- if (nr_regions > ctx->attrs.max_nr_regions / 2)
- return;
+ if (nr_regions >= max_nr_regions)
+ goto done;
+
+ if (nr_regions > max_nr_regions / 2) {
+ damon_split_some_regions(ctx,
+ max_nr_regions / (max_nr_regions - nr_regions));
+ goto done;
+ }
/* Maybe the middle of the region has different access frequency */
if (last_nr_regions == nr_regions &&
- nr_regions < ctx->attrs.max_nr_regions / 3)
+ nr_regions < max_nr_regions / 3)
nr_subregions = 3;
damon_for_each_target(t, ctx)
damon_split_regions_of(ctx, t, nr_subregions,
ctx->min_region_sz);
+done:
last_nr_regions = nr_regions;
}
--
2.43.0
next prev parent reply other threads:[~2026-06-26 8:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 8:58 [PATCH v2 0/2] mm/damon/core: detect internal variation above max_nr_regions/2 Jiayuan Chen
2026-06-26 8:58 ` Jiayuan Chen [this message]
2026-06-26 14:46 ` [PATCH v2 1/2] mm/damon/core: split a fraction of regions when nr_regions exceeds max/2 SeongJae Park
2026-06-26 8:58 ` [PATCH v2 2/2] mm/damon/tests/core-kunit: test split above max_nr_regions/2 Jiayuan Chen
2026-06-26 14:54 ` SeongJae Park
2026-06-26 14:59 ` [PATCH v2 0/2] mm/damon/core: detect internal variation " SeongJae Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260626085851.70754-2-jiayuan.chen@linux.dev \
--to=jiayuan.chen@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=damon@lists.linux.dev \
--cc=jiayuan.chen@shopee.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=shu17az@gmail.com \
--cc=sj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox