[PATCH v2 sched_ext/for-7.3 3/4] sched_ext: Inline small ext.c helpers shared across the sub.c split

[Tejun Heo <tj@kernel.org>]

The following trivial helpers in ext.c are called from both ext.c and the
sub-scheduler code. Define them as static inline in internal.h.

- scx_bypass_dsq()
- scx_bypass_dsp_enabled()
- scx_ops_sanitize_err()
- scx_schedule_reenq_local()

No functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 kernel/sched/ext/ext.c      | 57 -------------------------------------
 kernel/sched/ext/internal.h | 57 +++++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 57 deletions(-)

diff --git a/kernel/sched/ext/ext.c b/kernel/sched/ext/ext.c
index 58856a429821..f48d15ecd736 100644
--- a/kernel/sched/ext/ext.c
+++ b/kernel/sched/ext/ext.c
@@ -369,11 +369,6 @@ static const struct sched_class *scx_setscheduler_class(struct task_struct *p)
 	return __setscheduler_class(p->policy, p->prio);
 }
 
-static struct scx_dispatch_q *scx_bypass_dsq(struct scx_sched *sch, s32 cpu)
-{
-	return &per_cpu_ptr(sch->pcpu, cpu)->bypass_dsq;
-}
-
 static struct scx_dispatch_q *bypass_enq_target_dsq(struct scx_sched *sch, s32 cpu)
 {
 #ifdef CONFIG_EXT_SUB_SCHED
@@ -395,26 +390,6 @@ static struct scx_dispatch_q *bypass_enq_target_dsq(struct scx_sched *sch, s32 c
 	return scx_bypass_dsq(sch, cpu);
 }
 
-/**
- * scx_bypass_dsp_enabled - Check if bypass dispatch path is enabled
- * @sch: scheduler to check
- *
- * When a descendant scheduler enters bypass mode, bypassed tasks are scheduled
- * by the nearest non-bypassing ancestor, or the root scheduler if all ancestors
- * are bypassing. In the former case, the ancestor is not itself bypassing but
- * its bypass DSQs will be populated with bypassed tasks from descendants. Thus,
- * the ancestor's bypass dispatch path must be active even though its own
- * bypass_depth remains zero.
- *
- * This function checks bypass_dsp_enable_depth which is managed separately from
- * bypass_depth to enable this decoupling. See enable_bypass_dsp() and
- * scx_disable_bypass_dsp().
- */
-static bool scx_bypass_dsp_enabled(struct scx_sched *sch)
-{
-	return unlikely(atomic_read(&sch->bypass_dsp_enable_depth));
-}
-
 /**
  * rq_is_open - Is the rq available for immediate execution of an SCX task?
  * @rq: rq to test
@@ -1061,28 +1036,6 @@ bool scx_cpu_valid(struct scx_sched *sch, s32 cpu, const char *where)
 	}
 }
 
-/**
- * scx_ops_sanitize_err - Sanitize a -errno value
- * @sch: scx_sched to error out on error
- * @ops_name: operation to blame on failure
- * @err: -errno value to sanitize
- *
- * Verify @err is a valid -errno. If not, trigger scx_error() and return
- * -%EPROTO. This is necessary because returning a rogue -errno up the chain can
- * cause misbehaviors. For an example, a large negative return from
- * ops.init_task() triggers an oops when passed up the call chain because the
- * value fails IS_ERR() test after being encoded with ERR_PTR() and then is
- * handled as a pointer.
- */
-static int scx_ops_sanitize_err(struct scx_sched *sch, const char *ops_name, s32 err)
-{
-	if (err < 0 && err >= -MAX_ERRNO)
-		return err;
-
-	scx_error(sch, "ops.%s() returned an invalid errno %d", ops_name, err);
-	return -EPROTO;
-}
-
 static void deferred_bal_cb_workfn(struct rq *rq)
 {
 	run_deferred(rq);
@@ -1234,16 +1187,6 @@ void schedule_dsq_reenq(struct scx_sched *sch, struct scx_dispatch_q *dsq,
 		schedule_deferred(rq);
 }
 
-static void scx_schedule_reenq_local(struct rq *rq, u64 reenq_flags)
-{
-	struct scx_sched *root = rcu_dereference_sched(scx_root);
-
-	if (WARN_ON_ONCE(!root))
-		return;
-
-	schedule_dsq_reenq(root, &rq->scx.local_dsq, reenq_flags, rq);
-}
-
 /**
  * touch_core_sched - Update timestamp used for core-sched task ordering
  * @rq: rq to read clock from, must be locked
diff --git a/kernel/sched/ext/internal.h b/kernel/sched/ext/internal.h
index 53a8aec8652e..5d861cb0727d 100644
--- a/kernel/sched/ext/internal.h
+++ b/kernel/sched/ext/internal.h
@@ -1637,6 +1637,63 @@ extern struct scx_sched *scx_enabling_sub_sched;
 #define scx_error(sch, fmt, args...)						\
 	scx_exit((sch), SCX_EXIT_ERROR, 0, fmt, ##args)
 
+static inline struct scx_dispatch_q *scx_bypass_dsq(struct scx_sched *sch, s32 cpu)
+{
+	return &per_cpu_ptr(sch->pcpu, cpu)->bypass_dsq;
+}
+
+/**
+ * scx_bypass_dsp_enabled - Check if bypass dispatch path is enabled
+ * @sch: scheduler to check
+ *
+ * When a descendant scheduler enters bypass mode, bypassed tasks are scheduled
+ * by the nearest non-bypassing ancestor, or the root scheduler if all ancestors
+ * are bypassing. In the former case, the ancestor is not itself bypassing but
+ * its bypass DSQs will be populated with bypassed tasks from descendants. Thus,
+ * the ancestor's bypass dispatch path must be active even though its own
+ * bypass_depth remains zero.
+ *
+ * This function checks bypass_dsp_enable_depth which is managed separately from
+ * bypass_depth to enable this decoupling. See enable_bypass_dsp() and
+ * scx_disable_bypass_dsp().
+ */
+static inline bool scx_bypass_dsp_enabled(struct scx_sched *sch)
+{
+	return unlikely(atomic_read(&sch->bypass_dsp_enable_depth));
+}
+
+/**
+ * scx_ops_sanitize_err - Sanitize a -errno value
+ * @sch: scx_sched to error out on error
+ * @ops_name: operation to blame on failure
+ * @err: -errno value to sanitize
+ *
+ * Verify @err is a valid -errno. If not, trigger scx_error() and return
+ * -%EPROTO. This is necessary because returning a rogue -errno up the chain can
+ * cause misbehaviors. For an example, a large negative return from
+ * ops.init_task() triggers an oops when passed up the call chain because the
+ * value fails IS_ERR() test after being encoded with ERR_PTR() and then is
+ * handled as a pointer.
+ */
+static inline int scx_ops_sanitize_err(struct scx_sched *sch, const char *ops_name, s32 err)
+{
+	if (err < 0 && err >= -MAX_ERRNO)
+		return err;
+
+	scx_error(sch, "ops.%s() returned an invalid errno %d", ops_name, err);
+	return -EPROTO;
+}
+
+static inline void scx_schedule_reenq_local(struct rq *rq, u64 reenq_flags)
+{
+	struct scx_sched *root = rcu_dereference_sched(scx_root);
+
+	if (WARN_ON_ONCE(!root))
+		return;
+
+	schedule_dsq_reenq(root, &rq->scx.local_dsq, reenq_flags, rq);
+}
+
 /*
  * Return the rq currently locked from an scx callback, or NULL if no rq is
  * locked.
-- 
2.54.0