From: "Michael S. Tsirkin" <mst@redhat.com>
To: Simon Schippers <simon.schippers@tu-dortmund.de>
Cc: Brett Sheffield <bacs@librecast.net>,
regressions@lists.linux.dev, netdev@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>,
Tim Gebauer <tim.gebauer@tu-dortmund.de>,
Willem de Bruijn <willemdebruijn.kernel@gmail.com>,
Jason Wang <jasowang@redhat.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [REGRESSION][BISECTED] tun/tap & vhost-net: multi-threaded network performance
Date: Thu, 2 Jul 2026 03:42:30 -0400 [thread overview]
Message-ID: <20260702034152-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <ef33f0a7-f0b7-4bc4-9263-10d2b480d717@tu-dortmund.de>
On Thu, Jul 02, 2026 at 09:24:59AM +0200, Simon Schippers wrote:
> On 7/1/26 22:56, Michael S. Tsirkin wrote:
> > On Wed, Jul 01, 2026 at 09:16:48PM +0200, Brett Sheffield wrote:
> >> TL;DR - Commit 1d6e569b7d0c0b2736636749e4be0a27f3cefcb3 causes
> >> significant performance regressions with TAP interfaces and multithreaded
> >> network code. Please revert.
> >>
> >>
> >> Librecast is an IPv6 multicast library. One of the tests (0055) fails under
> >> Linux 7.2-rc1. The test performs data synchronization over IPv6 multicast using a TAP
> >> interface. This test has run successfully on every stable, LTS and mainline RC
> >> released in the past year. Every kernel with my Tested-by has run this test.
> >>
> >> There have been a bunch of changes to MLDv2 so I started bisecting there, but
> >> the culprit is actually 1d6e569b7d0c0b2736636749e4be0a27f3cefcb3 "tun/tap &
> >> vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
> >>
> >> Reverting this commit fixes the test.
> >>
> >> To eliminate my code and any multicast weirdness, I ran tests with iperf3
> >> comparing the same host running 7.2-rc1 both with and without 1d6e569b7d0
> >> reverted.
>
> Thank you very much for your bisect!
>
> As the author, I am sorry for that regression!
>
> >
> > Thanks a lot for the bisect! Reverting is not out of question, but
> > just before we do, it is worth analyzing the situation.
> >
> > Could you pls tell us
> > - do you see packet drops?
>
> iperf3 shows no TCP retransmissions, so there were never packet drops
> when the patch was enabled.
> It is the number after the sender data rate (example: threads 1,
> reverted has 368 retransmissions/drops).
>
> > - does it help to increase the tun queue size?
>
> I agree, this would be great to know.
>
> However, even then we must act. I am considering IFF_BACKPRESSURE
> as a feature flag, defaulting to off. It would just enable/disable
> the stopping logic in tun_net_xmit() and the waking logic
> in __tun_wake_queue(). If disabled, it would result in the same logic
> as before.
>
> I could provide such a patch as [net] material.
>
> Thanks again!
Or BQL? I quickly wrote a prototype of that and it seems to work well -
could you help test maybe?
> >
> > Thanks a lot!
> >
> >
> >> CPU: AMD Ryzen 9 9950X
> >>
> >> [ host ] - [ bridge ] - [ tap ] - [ guest (qemu) ]
> >>
> >> Running matching kernels on host and guest, I started iperf3 in server mode on
> >> the guest and tested from the host so traffic passes through the tap interface.
> >>
> >> iperf3 -s -V # server
> >> iperf3 -c guest -P nthreads # client
> >>
> >> 7.2.0-rc1 (threads 1):
> >>
> >> [ 5] 0.00-10.00 sec 20.2 GBytes 17.4 Gbits/sec 0 sender
> >> [ 5] 0.00-10.00 sec 2.00 GBytes 1.72 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 1, reverted):
> >>
> >> [ 5] 0.00-10.00 sec 15.3 GBytes 13.1 Gbits/sec 368 sender
> >> [ 5] 0.00-10.00 sec 2.00 GBytes 1.72 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 2):
> >>
> >> [SUM] 0.00-10.00 sec 10.9 GBytes 9.33 Gbits/sec 0 sender
> >> [SUM] 0.00-10.00 sec 4.00 GBytes 3.43 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 2, reverted):
> >>
> >> [SUM] 0.00-10.00 sec 15.9 GBytes 13.7 Gbits/sec 1567 sender
> >> [SUM] 0.00-10.00 sec 4.00 GBytes 3.43 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 4):
> >>
> >> [SUM] 0.00-10.00 sec 10.9 GBytes 9.33 Gbits/sec 0 sender
> >> [SUM] 0.00-10.00 sec 8.00 GBytes 6.87 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 4, reverted):
> >>
> >> [SUM] 0.00-10.00 sec 16.5 GBytes 14.1 Gbits/sec 6701 sender
> >> [SUM] 0.00-10.00 sec 8.00 GBytes 6.87 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 8):
> >>
> >> [SUM] 0.00-10.00 sec 10.7 GBytes 9.15 Gbits/sec 0 sender
> >> [SUM] 0.00-10.01 sec 10.6 GBytes 9.13 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 8, reverted):
> >>
> >> [SUM] 0.00-10.00 sec 16.2 GBytes 14.0 Gbits/sec 19319 sender
> >> [SUM] 0.00-10.00 sec 15.7 GBytes 13.5 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 16):
> >>
> >> [SUM] 0.00-10.00 sec 10.9 GBytes 9.35 Gbits/sec 0 sender
> >> [SUM] 0.00-10.01 sec 10.9 GBytes 9.32 Gbits/sec receiver
> >>
> >> 7.2.0-rc1 (threads 16, reverted):
> >>
> >> [SUM] 0.00-10.00 sec 14.4 GBytes 12.4 Gbits/sec 43593 sender
> >> [SUM] 0.00-10.00 sec 14.4 GBytes 12.4 Gbits/sec receiver
> >>
> >>
> >> As you can see, the new code works for single threaded, but for all other cases
> >> there's a significant performance drop. I see this trade-off is mentioned in the
> >> commit, but the performance drop off is much worse than suggested with the
> >> current patch.
> >>
> >> In our multicast use case data is sent by multiple threads to multiple groups
> >> simultaneously, this just breaks things to the extent that a <2 second test
> >> times out after 5 minutes.
> >>
> >>
> >> git bisect start
> >> # status: waiting for both good and bad commits
> >> # bad: [dc59e4fea9d83f03bad6bddf3fa2e52491777482] Linux 7.2-rc1
> >> git bisect bad dc59e4fea9d83f03bad6bddf3fa2e52491777482
> >> # status: waiting for good commit(s), bad commit known
> >> # good: [36bdc0e815b4e8a05b9028d8ef8a25e1ead35cc1] net: usb: asix: ax88772: re-add usbnet_link_change() in phylink callbacks
> >> git bisect good 36bdc0e815b4e8a05b9028d8ef8a25e1ead35cc1
> >> # good: [db314398f618a3a23315f73c87f7d318eaf06c1b] Merge branch 'net-bridge-mcast-support-exponential-field-encoding'
> >> git bisect good db314398f618a3a23315f73c87f7d318eaf06c1b
> >> # bad: [079a028d6327e68cfa5d38b36123637b321c19a7] string: Remove strncpy() from the kernel
> >> git bisect bad 079a028d6327e68cfa5d38b36123637b321c19a7
> >> # bad: [f396f4005180928cd9e15e352a6512865d3bc908] Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
> >> git bisect bad f396f4005180928cd9e15e352a6512865d3bc908
> >> # bad: [ec1806a730a1c0b3d68a7f9afe81514fb0dd7991] netfilter: x_tables: disable 32bit compat interface in user namespaces
> >> git bisect bad ec1806a730a1c0b3d68a7f9afe81514fb0dd7991
> >> # good: [50c2d91c5dfa0e465826ec1f8dbad9cdc254bd85] mptcp: do not drop partial packets
> >> git bisect good 50c2d91c5dfa0e465826ec1f8dbad9cdc254bd85
> >> # good: [68993ced0f618e36cf33388f1e50223e5e6e78cc] Merge tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
> >> git bisect good 68993ced0f618e36cf33388f1e50223e5e6e78cc
> >> # good: [34c78dff59a25110a4ce50c208e42a91490fe615] Merge branch 'net-use-ip_outnoroutes-drop-reason'
> >> git bisect good 34c78dff59a25110a4ce50c208e42a91490fe615
> >> # bad: [9587ed8137fb83d93f84b858337412f4500b21e9] Merge branch 'gve-add-support-for-ptp-gettimex64'
> >> git bisect bad 9587ed8137fb83d93f84b858337412f4500b21e9
> >> # bad: [83ea7fd73b11dd8cbf4416507a5eac3890b49fb0] net: dsa: microchip: remove unused phylink_mac_link_up() callback
> >> git bisect bad 83ea7fd73b11dd8cbf4416507a5eac3890b49fb0
> >> # bad: [f0de88303d5e7e04a1224bc7a00512b5a1c4fe7a] net: make is_skb_wmem() available to modules
> >> git bisect bad f0de88303d5e7e04a1224bc7a00512b5a1c4fe7a
> >> # bad: [c411baa463e85a779a7e68a00ba6298770b58c4c] netconsole: move push_ipv6() from netpoll
> >> git bisect bad c411baa463e85a779a7e68a00ba6298770b58c4c
> >> # good: [fba362c17d9d9211fc51f272156bb84fc23bdf98] ptr_ring: move free-space check into separate helper
> >> git bisect good fba362c17d9d9211fc51f272156bb84fc23bdf98
> >> # bad: [d0273dbe8be1640e597552f81faf1d6c9997d3e3] ipvlan: use netif_receive_skb() in ipvlan_process_multicast()
> >> git bisect bad d0273dbe8be1640e597552f81faf1d6c9997d3e3
> >> # bad: [3803065cd6b0630d4161d86aa04e2d1db0f3a0b5] Merge branch 'tun-tap-vhost-net-apply-qdisc-backpressure-on-full-ptr_ring-to-reduce-tx-drops'
> >> git bisect bad 3803065cd6b0630d4161d86aa04e2d1db0f3a0b5
> >> # bad: [1d6e569b7d0c0b2736636749e4be0a27f3cefcb3] tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present
> >> git bisect bad 1d6e569b7d0c0b2736636749e4be0a27f3cefcb3
> >> # first bad commit: [1d6e569b7d0c0b2736636749e4be0a27f3cefcb3] tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present
> >>
> >> --
> >> Brett Sheffield (he/him)
> >> Librecast - Decentralising the Internet with Multicast
> >> https://librecast.net/
> >> https://blog.brettsheffield.com/
> >
next prev parent reply other threads:[~2026-07-02 7:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 19:16 [REGRESSION][BISECTED] tun/tap & vhost-net: multi-threaded network performance Brett Sheffield
2026-07-01 20:56 ` Michael S. Tsirkin
2026-07-02 7:24 ` Simon Schippers
2026-07-02 7:42 ` Michael S. Tsirkin [this message]
2026-07-02 8:01 ` Simon Schippers
2026-07-02 11:07 ` Brett Sheffield
2026-07-02 22:44 ` Michael S. Tsirkin
2026-07-03 10:34 ` Simon Schippers
2026-07-02 22:55 ` Michael S. Tsirkin
2026-07-03 10:35 ` Simon Schippers
2026-07-03 14:13 ` Brett Sheffield
2026-07-03 14:19 ` Michael S. Tsirkin
2026-07-03 10:41 ` Simon Schippers
2026-07-03 11:55 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260702034152-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=andrew+netdev@lunn.ch \
--cc=bacs@librecast.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jasowang@redhat.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=regressions@lists.linux.dev \
--cc=simon.schippers@tu-dortmund.de \
--cc=tim.gebauer@tu-dortmund.de \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox