Re: [PATCH RFC 8/8] clk: sunxi-ng: a733: Add reset lines

[Enzo Adriano <enzo.adriano.code@gmail.com>]

Hi Junhui,

Same exercise for the reset map: I compared all 121 entries' offsets
and bit positions against the public A733 User Manual V0.92. 115 match
the manual exactly (including the multi-bit GMAC0 entry - 0x141C bits
16/17 per section 4.1.6.212 - and RST_BUS_SYSDAP at 0x7ac, which is
what makes the gate offset in patch 7/8 stand out).

The six that have no register in the public manual, in case you want
to add provenance notes near them (as already discussed for other
undocumented IDs in this series):

  - RST_BUS_SPI4       { 0x0F2C, BIT(16) }
  - RST_BUS_SGPIO      { 0x1064, BIT(16) }
  - RST_BUS_LPC        { 0x1084, BIT(16) }
  - RST_BUS_GMAC1      { 0x142C, BIT(16) }  [GMAC1 question]
  - RST_BUS_GMAC1_AXI  { 0x142C, BIT(17) }  [GMAC1 question]
  - RST_BUS_TCON_LCD2  { 0x1514, BIT(16) } - the manual documents only
    VO0_TCONLCD0_BGR (0x1504) and VO0_TCONLCD1_BGR (0x150C); there is
    no TCONLCD2 register set in V0.92

Everything else in the reset map checks out against the manual.

This analysis was done with AI assistance (Claude Code, claude-fable-5)
and each finding was checked against the cited sources.

Thanks,
Enzo