From: kernel test robot <lkp@intel.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: oe-kbuild-all@lists.linux.dev, linux-kernel@vger.kernel.org,
Florian Fainelli <florian.fainelli@broadcom.com>
Subject: arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
Date: Fri, 03 Jul 2026 04:25:53 +0200 [thread overview]
Message-ID: <202607030407.1DT5VDLb-lkp@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 87320be9f0d24fce67631b7eef919f0b79c3e45c
commit: 6b0cb7b34ba68425abb6b3174cca4a7ee031da6d ARM: dts: BCM5301X: EA9200: add LEDs
date: 3 months ago
config: arm-randconfig-2055 (https://download.01.org/0day-ci/archive/20260703/202607030407.1DT5VDLb-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 12.5.0
dtschema: 2026.7.dev1+g2203c1720
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260703/202607030407.1DT5VDLb-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Fixes: 6b0cb7b34ba6 ("ARM: dts: BCM5301X: EA9200: add LEDs")
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202607030407.1DT5VDLb-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi:10.18-19.5: Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:24.28-47.4: Warning (unique_unit_address_if_enabled): /chipcommon-a-bus@18000000: duplicate unit-address (also used in node /axi@18000000)
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:377.22-382.4: Warning (unique_unit_address_if_enabled): /mdio@18003000: duplicate unit-address (also used in node /mdio-mux@18003000)
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: /axi@18000000: failed to match any schema with compatible: ['brcm,bus-axi']
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): ports:port@8: 'phy-mode' is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): Unevaluated properties are not allowed ('ports' was unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
>> arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'rfkill-none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'rfkill-none' does not match '^cpu[0-9]*$'
'rfkill-none' does not match '^hci[0-9]+-power$'
'rfkill-none' does not match '^mmc[0-9]+$'
'rfkill-none' does not match '^phy[0-9]+tx$'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-07-03 2:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202607030407.1DT5VDLb-lkp@intel.com \
--to=lkp@intel.com \
--cc=florian.fainelli@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=rosenp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox