From: Tejun Heo <tj@kernel.org>
To: David Vernet <void@manifault.com>,
Andrea Righi <arighi@nvidia.com>,
Changwoo Min <changwoo@igalia.com>
Cc: sched-ext@lists.linux.dev, Emil Tsalapatis <emil@etsalapatis.com>,
linux-kernel@vger.kernel.org, Tejun Heo <tj@kernel.org>
Subject: [PATCH v2 sched_ext/for-7.3 01/36] sched_ext: Add SCX_CALL_CID_OP_TASK() for cid-form op dispatch
Date: Sun, 5 Jul 2026 15:40:23 -1000 [thread overview]
Message-ID: <20260706014058.439853-2-tj@kernel.org> (raw)
In-Reply-To: <20260706014058.439853-1-tj@kernel.org>
The cid-form ops overlay their cpu-form siblings at the same struct slot.
Ops whose signature matches the sibling are invoked through the cpu-form
call sites unchanged, but set_cmask() takes an arena cmask address rather
than a cpumask, so scx_call_op_set_cpumask() calls ops_cid.set_cmask()
directly and hand-rolled the kf_tasks[] and locked_rq bracket that
SCX_CALL_OP_TASK() provides. The hand-rolled bracket reset locked_rq to
NULL on exit instead of restoring the saved value, so a nested call would
clobber the outer op's locked-rq tracking.
Parameterize the dispatch macros by the ops-table member and add
SCX_CALL_CID_OP_TASK(), which routes through sch->ops_cid. Convert
scx_call_op_set_cpumask() to it and drop the hand-rolled bracket. The only
behavioral change is that locked_rq is now saved and restored like every
other op call site.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
kernel/sched/ext/ext.c | 14 +++-----------
kernel/sched/ext/internal.h | 23 ++++++++++++++++++++---
2 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/kernel/sched/ext/ext.c b/kernel/sched/ext/ext.c
index 1a0ec985da77..b1bd506fd6ec 100644
--- a/kernel/sched/ext/ext.c
+++ b/kernel/sched/ext/ext.c
@@ -410,11 +410,6 @@ static inline void scx_call_op_set_cpumask(struct scx_sched *sch, struct rq *rq,
struct task_struct *task,
const struct cpumask *cpumask)
{
- WARN_ON_ONCE(current->scx.kf_tasks[0]);
- current->scx.kf_tasks[0] = task;
- if (rq)
- update_locked_rq(rq);
-
if (scx_is_cid_type()) {
struct scx_cmask *kern_va = *this_cpu_ptr(sch->set_cmask_scratch);
/*
@@ -423,14 +418,11 @@ static inline void scx_call_op_set_cpumask(struct scx_sched *sch, struct rq *rq,
* the sole user of the scratch area.
*/
scx_cpumask_to_cmask(cpumask, kern_va);
- sch->ops_cid.set_cmask(task, scx_kaddr_to_arena(sch, kern_va));
+ SCX_CALL_CID_OP_TASK(sch, set_cmask, rq, task,
+ scx_kaddr_to_arena(sch, kern_va));
} else {
- sch->ops.set_cpumask(task, cpumask);
+ SCX_CALL_OP_TASK(sch, set_cpumask, rq, task, cpumask);
}
-
- if (rq)
- update_locked_rq(NULL);
- current->scx.kf_tasks[0] = NULL;
}
enum scx_dsq_iter_flags {
diff --git a/kernel/sched/ext/internal.h b/kernel/sched/ext/internal.h
index f9fe7c6ebc4b..5ca44ad88786 100644
--- a/kernel/sched/ext/internal.h
+++ b/kernel/sched/ext/internal.h
@@ -1751,8 +1751,11 @@ static inline void update_locked_rq(struct rq *rq)
/*
* SCX ops can recurse via scx_bpf_sub_dispatch() - the inner call must not
* clobber the outer's scx_locked_rq_state. Save it on entry, restore on exit.
+ *
+ * @ops is the ops table to dispatch through: ops for the cpu form, ops_cid
+ * for the cid form.
*/
-#define SCX_CALL_OP(sch, op, locked_rq, args...) \
+#define __SCX_CALL_OP(sch, ops, op, locked_rq, args...) \
do { \
struct rq *__prev_locked_rq; \
\
@@ -1765,6 +1768,9 @@ do { \
update_locked_rq(__prev_locked_rq); \
} while (0)
+#define SCX_CALL_OP(sch, op, locked_rq, args...) \
+ __SCX_CALL_OP(sch, ops, op, locked_rq, ##args)
+
#define SCX_CALL_OP_RET(sch, op, locked_rq, args...) \
({ \
struct rq *__prev_locked_rq; \
@@ -1796,14 +1802,25 @@ do { \
* WARN_ON_ONCE() in each macro catches a re-entry of any of the three variants
* while a previous one is still in progress.
*/
-#define SCX_CALL_OP_TASK(sch, op, locked_rq, task, args...) \
+#define __SCX_CALL_OP_TASK(sch, ops, op, locked_rq, task, args...) \
do { \
WARN_ON_ONCE(current->scx.kf_tasks[0]); \
current->scx.kf_tasks[0] = task; \
- SCX_CALL_OP((sch), op, locked_rq, task, ##args); \
+ __SCX_CALL_OP((sch), ops, op, locked_rq, task, ##args); \
current->scx.kf_tasks[0] = NULL; \
} while (0)
+#define SCX_CALL_OP_TASK(sch, op, locked_rq, task, args...) \
+ __SCX_CALL_OP_TASK(sch, ops, op, locked_rq, task, ##args)
+
+/*
+ * Dispatch a task op through the cid-form ops_cid table. Only set_cmask() needs
+ * this: it takes an arena cmask address instead of a cpumask, so it cannot be
+ * invoked via its cpu-form set_cpumask() slot.
+ */
+#define SCX_CALL_CID_OP_TASK(sch, op, locked_rq, task, args...) \
+ __SCX_CALL_OP_TASK(sch, ops_cid, op, locked_rq, task, ##args)
+
#define SCX_CALL_OP_TASK_RET(sch, op, locked_rq, task, args...) \
({ \
__typeof__((sch)->ops.op(task, ##args)) __ret; \
--
2.54.0
next prev parent reply other threads:[~2026-07-06 1:41 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 1:40 [PATCHSET v2 sched_ext/for-7.3] sched_ext: Capability-based CPU delegation for sub-schedulers Tejun Heo
2026-07-06 1:40 ` Tejun Heo [this message]
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 02/36] sched_ext: Rename extra_enq_flags to remote_activate_enq_flags Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 03/36] sched_ext: Fix premature ops->priv publication in scx_alloc_and_add_sched() Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 04/36] tools/sched_ext: scx - Fix cmask_subset(), cmask_equal() and cmask_weight() Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 05/36] sched_ext: Use READ_ONCE/WRITE_ONCE in cmask word ops and drop _RACY variants Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 06/36] tools/sched_ext: scx_qmap - Use bare u64/u32/s32 integer types Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 07/36] sched_ext: Reject direct slice and dsq_vtime writes for cid-form schedulers Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 08/36] sched_ext: Make scx_bpf_kick_cid() return void Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 09/36] sched_ext: Make the kick machinery per-sched Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 10/36] sched_ext: Add ops.init_cids() to finalize the cid layout before init Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 11/36] sched_ext: Add CID sharding Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 12/36] sched_ext: Add shard boundaries to scx_bpf_cid_override() Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 13/36] sched_ext: Defer scx_sched kobj sysfs add into the enable workfns Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 14/36] sched_ext: Add per-shard scx_sched storage scaffolding Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 15/36] sched_ext: Add scx_cmask_ref for validated arena cmask access Tejun Heo
2026-07-06 9:04 ` Andrea Righi
2026-07-06 23:40 ` Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 16/36] sched_ext: Build the set_cmask scratch from trusted geometry Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 17/36] sched_ext: RCU-protect the sub-sched tree's children/sibling lists Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 18/36] sched_ext: Add scx_skip_subtree_pre() Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 19/36] sched_ext: Add per-shard cap delegation for sub-schedulers Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 20/36] sched_ext: Add coalescing sub_caps_updated() notifier " Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 21/36] sched_ext: Maintain per-cpu effective cap copies for single-read checks Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 22/36] sched_ext: Add sub_ecaps_updated() effective-cap change notifier Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 23/36] sched_ext: Generalize local-DSQ handling to rq-owned DSQs Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 24/36] sched_ext: Add reject DSQ for cap-rejected dispatches Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 25/36] sched_ext: Add the SCX_CAP_ENQ_IMMED cap Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 26/36] sched_ext: Assign a unique id to each scheduler instance Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 27/36] sched_ext: Route task slice writes through set_task_slice() Tejun Heo
2026-07-06 9:10 ` Andrea Righi
2026-07-06 23:40 ` Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 28/36] sched_ext: Tie cpu occupancy to SCX_CAP_BASE through the task slice Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 29/36] sched_ext: Add the SCX_CAP_ENQ cap Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 30/36] sched_ext: Gate kicks on SCX_CAP_BASE and preemption on SCX_CAP_PREEMPT Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 31/36] sched_ext: Authorize remote-move inserts against the placing scheduler Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 32/36] sched_ext: Route ops.update_idle() to sub-schedulers and re-notify owed scheds Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 33/36] sched_ext: Replay ecaps notifications suppressed by bypass Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 34/36] sched_ext: Add scx_bpf_sub_kill() to evict a child sub-scheduler Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 35/36] tools/sched_ext: scx_qmap - Expand hierarchical sub-scheduling Tejun Heo
2026-07-06 1:40 ` [PATCH v2 sched_ext/for-7.3 36/36] tools/sched_ext: scx_qmap - Add sub-sched cap fault injection Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260706014058.439853-2-tj@kernel.org \
--to=tj@kernel.org \
--cc=arighi@nvidia.com \
--cc=changwoo@igalia.com \
--cc=emil@etsalapatis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sched-ext@lists.linux.dev \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox