The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: David Laight <david.laight.linux@gmail.com>,
	David Carlier <devnexen@gmail.com>,
	dan.scally@ideasonboard.com, mchehab@kernel.org,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH] media: mali-c55: Fix unaligned access of AEC histogram zone weights
Date: Mon, 6 Jul 2026 13:46:52 +0300	[thread overview]
Message-ID: <20260706104652.GB66892@killaraus.ideasonboard.com> (raw)
In-Reply-To: <aks7usxfDajS-W_5@zed>

On Mon, Jul 06, 2026 at 07:38:58AM +0200, Jacopo Mondi wrote:
> On Fri, Jul 03, 2026 at 10:16:51PM +0100, David Laight wrote:
> > On Fri, 3 Jul 2026 11:44:31 +0200 Jacopo Mondi wrote:
> > > On Thu, Jul 02, 2026 at 11:34:53AM +0100, David Carlier wrote:
> > > > mali_c55_params_aexp_hist_weights() packs the 225 per-zone u8 weights
> > > > into the ISP registers four at a time by casting the zone_weights array
> > > > to u32 and dereferencing it. The array sits at offset 10 within the
> > > > parameter block, so it is only 2-byte aligned: the u32 access is
> > > > unaligned, which is undefined behaviour and can fault on strict-align
> > > > configurations or once the loop is auto-vectorised.
> > >
> > > well, I don't there is a risk of undefined behaviour on ARMv8, it's
> > > just less efficient
> > >
> > > > The cast also reads the four weights in host byte order before they are
> > > > written to the little-endian register, so on big-endian hosts the four
> > > > weights packed into each register end up in the wrong byte lanes.
> > >
> > > Also we don't have any endianess issue as the IP is only found on
> > > little endian systems
> > >
> > > > Read the weights with get_unaligned_le32() instead, which is both
> > > > alignment-safe and fixes the byte order regardless of host endianness.
> > >
> > > mmm, I read in Documentation/core-api/unaligned-memory-access.rst
> > > that:
> > >
> > > ------------------------------------------------------------------------------
> > > 	u32 value = get_unaligned((u32 *) data);
> > >
> > > These macros work for memory accesses of any length (not just 32 bits as
> > > in the examples above). Be aware that when compared to standard access of
> > > aligned memory, using these macros to access unaligned memory can be costly in
> > > terms of performance.
> > >
> > > If use of such macros is not convenient, another option is to use memcpy(),
> > > where the source or destination (or both) are of type u8* or unsigned char*.
> > > Due to the byte-wise nature of this operation, unaligned accesses are avoided.
> > > ------------------------------------------------------------------------------
> > >
> > > Which seems to suggest, if the issue here is performances, we should
> > > aim for something different ? (honest question here, any kind of
> > > guidance is appreciated)
> > >
> > > > Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> > > > Cc: stable@vger.kernel.org
> > >
> > > If it's only about performances, does this qualifies as a fix ?
> > >
> > > > Signed-off-by: David Carlier <devnexen@gmail.com>
> > > > ---
> > > >  drivers/media/platform/arm/mali-c55/mali-c55-params.c | 3 ++-
> > > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-params.c b/drivers/media/platform/arm/mali-c55/mali-c55-params.c
> > > > index de0e9d898..1aaf64dde 100644
> > > > --- a/drivers/media/platform/arm/mali-c55/mali-c55-params.c
> > > > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-params.c
> > > > @@ -6,6 +6,7 @@
> > > >   */
> > > >  #include <linux/media/arm/mali-c55-config.h>
> > > >  #include <linux/pm_runtime.h>
> > > > +#include <linux/unaligned.h>
> > > >
> > > >  #include <media/media-entity.h>
> > > >  #include <media/v4l2-dev.h>
> > > > @@ -203,7 +204,7 @@ mali_c55_params_aexp_hist_weights(struct mali_c55 *mali_c55,
> > > >  	 * of overwriting other registers.
> > > >  	 */
> > > >  	for (unsigned int i = 0; i < 56; i++) {
> > > > -		val = ((u32 *)params->zone_weights)[i]
> > > > +		val = get_unaligned_le32(&params->zone_weights[i * 4])
> > > >  			    & MALI_C55_AEXP_HIST_ZONE_WEIGHT_MASK;
> >
> > On LE with HAVE_EFFICIENT_UNALIGNED_ACCESS the latter generates what you
> > expect the former to generate.
> > But gcc can unroll loops and use (IIRC) 'rdp' to read two registers at once.
> > That will crash and burn.
> >
> > The best thing would be to have a union of the two arrays with the
> > member marked __packed to remove the padding before it.
> 
> I'm not sure I got what are the "two arrays" you mentioned here.
> 
> params->zone_weights[] is uABI, it's hard to change its definition
> without really good motivations.
> 
> > > We could do:
> > >
> > >         memcpy(&val, &params->zone_weights[4 * i], 4);
> >
> > Some of the KASAN (etc) builds might make a mess of that.
> > Without compiler optimisations of memcpy() it is horrid.
> >
> > >         addr = base + MALI_C55_AEXP_HIST_ZONE_WEIGHTS_OFFSET + (4 * i);
> > >
> > >         mali_c55_ctx_write(mali_c55, addr,
> > >                            val & MALI_C55_AEXP_HIST_ZONE_WEIGHT_MASK);
> > >
> > > Or this could be an alternative:
> > >
> > >         const u8 *w = &params->zone_weights[4 * i];
> > >
> > >         val = w[0] | w[1] << 8 | w[2] << 16 | w[3] << 24;
> >
> > That is a possible implementation of get_unaligned_le32() no point
> > doing it explicitly.
> >
> > A late enough gcc will convert that to a 32bit memory read (with any
> > byteswap in the read or after) if unaligned accesses are supported.
> > Otherwise you get byte loads, shifts and ors.
> 
> To sum it up: since we can't change uABI easily, the best thing here
> is not change anything and drop this patch ?

Doesn't the patch fix a real problem ?

Fixing the uABI would be best, but as you mentioned that's more
difficult (the faulty structure got merged recently in v6.19 and we
most likely control userspace, but still).

> > >         addr = base + MALI_C55_AEXP_HIST_ZONE_WEIGHTS_OFFSET + (4 * i);
> > >
> > >         mali_c55_ctx_write(mali_c55, addr,
> > >                            val & MALI_C55_AEXP_HIST_ZONE_WEIGHT_MASK);
> > >
> > > What do you think ?
> > >
> > > >  		addr = base + MALI_C55_AEXP_HIST_ZONE_WEIGHTS_OFFSET + (4 * i);
> > > >

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-07-06 10:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-02 10:34 [PATCH] media: mali-c55: Fix unaligned access of AEC histogram zone weights David Carlier
2026-07-03  9:44 ` Jacopo Mondi
2026-07-03 21:16   ` David Laight
2026-07-06  5:38     ` Jacopo Mondi
2026-07-06 10:46       ` Laurent Pinchart [this message]
2026-07-06 12:39         ` David Laight
2026-07-06 14:42           ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260706104652.GB66892@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dan.scally@ideasonboard.com \
    --cc=david.laight.linux@gmail.com \
    --cc=devnexen@gmail.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox