The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: lee@kernel.org, Ping Cheng <ping.cheng@wacom.com>,
	Jason Gerecke <jason.gerecke@wacom.com>,
	Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <bentiss@kernel.org>,
	Aaron Skomra <aaron.skomra@wacom.com>,
	Peter Hutterer <peter.hutterer@who-t.net>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration
Date: Tue,  7 Jul 2026 12:10:40 +0000	[thread overview]
Message-ID: <20260707121051.1683937-1-lee@kernel.org> (raw)

Input subsystem guidelines require that device capabilities are advertised
before the input device is registered.  The Wacom driver was violating
this by advertising the SW_MUTE_DEVICE capability post-registration in
wacom_set_shared_values() (and duplicating it in device-specific setup
cases).

Resolve this by moving the SW_MUTE_DEVICE capability setup to
wacom_setup_touch_input_capabilities() for all touch devices that support
it, excluding TabletPC devices.

Additionally, replace the lookup-dependent
'wacom_wac->shared->touch->product' references with 'hdev->product'
inside wacom_setup_touch_input_capabilities() as 'hdev' is already
available and represents the touch device itself.

Fixes: d2ec58aee8b1 ("HID: wacom: generic: support generic touch switch")
Signed-off-by: Lee Jones <lee@kernel.org>
---

v4 -> v5: New patch used to split out SW_MUTE_DEVICE as per Jason's request

drivers/hid/wacom_sys.c |  6 ------
 drivers/hid/wacom_wac.c | 21 +++++++++++++--------
 2 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 2220168bf116..60b380efdfb7 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2361,12 +2361,6 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
 			wacom_wac->shared->is_touch_on = true;
 	}
 
-	if (wacom_wac->shared->has_mute_touch_switch &&
-	    wacom_wac->shared->touch_input) {
-		set_bit(EV_SW, wacom_wac->shared->touch_input->evbit);
-		input_set_capability(wacom_wac->shared->touch_input, EV_SW,
-				     SW_MUTE_DEVICE);
-	}
 }
 
 static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index da1f0ea85625..a31325be50f8 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3951,6 +3951,8 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
 int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
 					 struct wacom_wac *wacom_wac)
 {
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	struct hid_device *hdev = wacom->hdev;
 	struct wacom_features *features = &wacom_wac->features;
 
 	if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
@@ -3961,9 +3963,14 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
 	else
 		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 
-	if (features->type == HID_GENERIC)
+	if (features->type == HID_GENERIC) {
+		if (wacom_wac->shared && wacom_wac->shared->has_mute_touch_switch) {
+			input_dev->evbit[0] |= BIT_MASK(EV_SW);
+			__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
+		}
 		/* setup has already been done */
 		return 0;
+	}
 
 	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
@@ -3995,19 +4002,17 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
 		input_dev->evbit[0] |= BIT_MASK(EV_SW);
 		__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
 
-		if (wacom_wac->shared->touch->product == 0x361) {
+		if (hdev->product == 0x361) {
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, 12440, 4, 0);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
 					     0, 8640, 4, 0);
-		}
-		else if (wacom_wac->shared->touch->product == 0x360) {
+		} else if (hdev->product == 0x360) {
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, 8960, 4, 0);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
 					     0, 5920, 4, 0);
-		}
-		else if (wacom_wac->shared->touch->product == 0x393) {
+		} else if (hdev->product == 0x393) {
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, 6400, 4, 0);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
@@ -4037,8 +4042,8 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
 		fallthrough;
 
 	case WACOM_27QHDT:
-		if (wacom_wac->shared->touch->product == 0x32C ||
-		    wacom_wac->shared->touch->product == 0xF6) {
+		if (hdev->product == 0x32C ||
+		    hdev->product == 0xF6) {
 			input_dev->evbit[0] |= BIT_MASK(EV_SW);
 			__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
 			wacom_wac->has_mute_touch_switch = true;
-- 
2.55.0.rc2.803.g1fd1e6609c-goog


             reply	other threads:[~2026-07-07 12:11 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-07 12:10 Lee Jones [this message]
2026-07-07 12:10 ` [PATCH 2/4] HID: wacom: Fix Use-After-Free in wacom_intuos_pad Lee Jones
2026-07-07 12:10 ` [PATCH 3/4] HID: wacom: Fix Use-After-Free in wacom_bamboo_pad Lee Jones
2026-07-07 12:10 ` [PATCH 4/4] HID: wacom: Redesign shared sibling data lifecycle Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260707121051.1683937-1-lee@kernel.org \
    --to=lee@kernel.org \
    --cc=aaron.skomra@wacom.com \
    --cc=bentiss@kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jason.gerecke@wacom.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.hutterer@who-t.net \
    --cc=ping.cheng@wacom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox