From: Richard Cheng <icheng@nvidia.com>
To: dave@stgolabs.net, jic23@kernel.org, dave.jiang@intel.com,
alison.schofield@intel.com, vishal.l.verma@intel.com,
djbw@kernel.org, danwilliams@nvidia.com
Cc: iweiny@kernel.org, ming.li@zohomail.com, kobak@nvidia.com,
kaihengf@nvidia.com, kees@kernel.org, newtonl@nvidia.com,
kristinc@nvidia.com, mochs@nvidia.com, linux-cxl@vger.kernel.org,
linux-kernel@vger.kernel.org, Richard Cheng <icheng@nvidia.com>,
Vishal Aslot <vaslot@nvidia.com>
Subject: [PATCH v7 2/2] tools/testing/cxl: Enable zero sized decoders under hb0
Date: Wed, 8 Jul 2026 18:40:23 +0800 [thread overview]
Message-ID: <20260708104024.68029-3-icheng@nvidia.com> (raw)
In-Reply-To: <20260708104024.68029-1-icheng@nvidia.com>
The kernel now allows committed zero-size HDM decoders so BIOS can lock
empty decoders; cxl_test needs to exercise that path.
Add a mock_zero_size_decoders module parameter (default off). When set,
the special endpoints under host-bridge0 (cxl_mem.0 and cxl_mem.4)
commit decoders 1 and 2 as zero-size + locked above the decoder[0]
auto-region, mirrored on the parent switch and host bridge. The mocks
take a real zero-size DPA reservation, like enumeration of real
hardware, so commit_end lands on a zero-size decoder and the
reservation, poison-by-endpoint, and teardown paths all run.
Signed-off-by: Vishal Aslot <vaslot@nvidia.com>
Signed-off-by: Richard Cheng <icheng@nvidia.com>
---
Changelog:
v6->v7:
- Rebase onto cxl/for-7.3/cxl-type2-test.
- Integrate mock_zero_size_decoders with special-topology parameter
validation and reject its incompatible use with fail_autoassemble.
v5->v6:
- Reword a mock comment, no functional change.
v4->v5:
- Mirror the v5 core semantics: mock zero-size decoders take a real
zero-size DPA reservation via devm_cxl_dpa_reserve() so
dpa_res/hdm_end/cxled->part match real hardware enumeration and
the poison-by-endpoint walk reaches commit_end.
- Set cxled->state = CXL_DECODER_STATE_AUTO to match
init_hdm_decoder()'s fall-through (undoes the v2 switch to
MANUAL).
- cxld_registry_restore(): reserve unconditionally for enabled
endpoint decoders; enabled now implies reserved, sized or not.
v3->v4:
- No change.
v2->v3:
- Gate the zero-size + locked decoder injection behind a new
mock_zero_size_decoders module parameter (default off). v2
applied it unconditionally on the host-bridge0 auto-region
endpoints, which the region test suite reuses, regressing 7 of
17 cxl unit tests; defaulting off leaves the shared topology
untouched.
v1->v2:
- Replace second_decoder(), third_decoder() with a single
match_decoder_by_index() helper, so all lookups share one
matcher.
- Use DEFINE_RANGE() for the empty range instead of an open-coded
struct.
- Set cxled->state = CXL_DECODER_STATE_MANUAL rather than
STATE_AUTO.
- Set CXL_DECODER_F_LOCK on the mock zero-size decoders to model
the BIOS-burns-slots case.
---
tools/testing/cxl/test/cxl.c | 109 ++++++++++++++++++++++++++++++-----
1 file changed, 94 insertions(+), 15 deletions(-)
diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c
index 8ab2ce1262f3..fff2004a08c8 100644
--- a/tools/testing/cxl/test/cxl.c
+++ b/tools/testing/cxl/test/cxl.c
@@ -18,6 +18,7 @@ static int interleave_arithmetic;
static bool extended_linear_cache;
static bool fail_autoassemble;
static bool type2_test;
+static bool mock_zero_size_decoders;
#define FAKE_QTG_ID 42
@@ -872,14 +873,13 @@ static int cxld_registry_restore(struct cxl_decoder *cxld,
cxld_copy(cxld, &td->cxled.cxld);
cxled->state = td->cxled.state;
cxled->skip = td->cxled.skip;
- if (range_len(&td->dpa_range)) {
- rc = devm_cxl_dpa_reserve(cxled, td->dpa_range.start,
- range_len(&td->dpa_range),
- td->cxled.skip);
- if (rc) {
- init_disabled_mock_decoder(cxld);
- return rc;
- }
+ /* enabled endpoint decoders hold a reservation, sized or not */
+ rc = devm_cxl_dpa_reserve(cxled, td->dpa_range.start,
+ range_len(&td->dpa_range),
+ td->cxled.skip);
+ if (rc) {
+ init_disabled_mock_decoder(cxld);
+ return rc;
}
port->commit_end = cxld->id;
}
@@ -1072,16 +1072,49 @@ static void default_mock_decoder(struct cxl_decoder *cxld)
WARN_ON_ONCE(!cxld_registry_new(cxld));
}
-static int first_decoder(struct device *dev, const void *data)
+static int match_decoder_by_index(struct device *dev, const void *data)
{
+ int target_id = *(const int *)data;
struct cxl_decoder *cxld;
if (!is_switch_decoder(dev))
return 0;
cxld = to_cxl_decoder(dev);
- if (cxld->id == 0)
- return 1;
- return 0;
+ return cxld->id == target_id;
+}
+
+/*
+ * Mock a committed, locked, empty decoder
+ * (CXL r4.0 8.2.4.20.12). Gated by the mock_zero_size_decoders module
+ * param so the default cxl_test topology, shared by the region test
+ * suite, is left undisturbed.
+ */
+static void size_zero_mock_decoder_ep(struct cxl_decoder *cxld, u64 base)
+{
+ struct cxl_endpoint_decoder *cxled = to_cxl_endpoint_decoder(&cxld->dev);
+
+ cxld->hpa_range = DEFINE_RANGE(base, base - 1);
+ cxld->interleave_ways = 2;
+ cxld->interleave_granularity = 4096;
+ cxld->target_type = CXL_DECODER_HOSTONLYMEM;
+ cxld->flags = CXL_DECODER_F_ENABLE | CXL_DECODER_F_LOCK;
+ cxled->state = CXL_DECODER_STATE_AUTO;
+ /* decoder[0] reserved [0, size/2), empty decoders sit at that watermark */
+ devm_cxl_dpa_reserve(cxled, mock_auto_region_size / 2, 0, 0);
+ cxld->commit = mock_decoder_commit;
+ cxld->reset = mock_decoder_reset;
+}
+
+static void size_zero_mock_decoder_sw(struct cxl_decoder *cxld, u64 base,
+ int level)
+{
+ cxld->flags = CXL_DECODER_F_ENABLE | CXL_DECODER_F_LOCK;
+ cxld->target_type = CXL_DECODER_HOSTONLYMEM;
+ cxld->interleave_ways = level == 0 ? 2 : 1;
+ cxld->interleave_granularity = 4096;
+ cxld->hpa_range = DEFINE_RANGE(base, base - 1);
+ cxld->commit = mock_decoder_commit;
+ cxld->reset = mock_decoder_reset;
}
enum cxld_init_type {
@@ -1114,7 +1147,7 @@ static enum cxld_init_type get_decoder_init_type(struct cxl_decoder *cxld,
* See 'cxl list -BMPu -m cxl_mem.0,cxl_mem.4'
*/
if (!is_endpoint_decoder(&cxld->dev) || !hb0 || pdev->id % 4 ||
- pdev->id > 4 || cxld->id > 0)
+ pdev->id > 4 || cxld->id > (mock_zero_size_decoders ? 2 : 0))
return MOCK_DECODER_INIT_DEFAULT;
return type2_test ? MOCK_DECODER_INIT_TYPE2_AUTO :
@@ -1147,6 +1180,7 @@ static void mock_init_hdm_type2_cxled(struct cxl_endpoint_decoder *cxled,
struct cxl_port *root_port;
struct device *dev;
u64 base;
+ int id = 0;
base = window->base_hpa;
cxld->hpa_range = (struct range) {
@@ -1172,7 +1206,7 @@ static void mock_init_hdm_type2_cxled(struct cxl_endpoint_decoder *cxled,
*/
dport = port->parent_dport;
root_port = dport->port;
- dev = device_find_child(&root_port->dev, NULL, first_decoder);
+ dev = device_find_child(&root_port->dev, &id, match_decoder_by_index);
/*
* Ancestor ports are guaranteed to be enumerated before
* @port, and all ports have at least one decoder.
@@ -1232,6 +1266,20 @@ static void mock_init_hdm_type3_cxled(struct cxl_endpoint_decoder *cxled,
base = window->base_hpa;
if (extended_linear_cache)
base += mock_auto_region_size;
+
+ /*
+ * With mock_zero_size_decoders, decoders 1 and 2 of the special
+ * endpoints mock committed, locked, empty decoders above the
+ * decoder[0] auto-region (CXL r4.0 8.2.4.20.12). commit_end then
+ * points at a zero-size decoder, exercising the zero-size
+ * reservation and poison-by-endpoint code paths.
+ */
+ if (cxld->id == 1 || cxld->id == 2) {
+ size_zero_mock_decoder_ep(cxld, base);
+ port->commit_end = cxld->id;
+ WARN_ON_ONCE(!cxld_registry_new(cxld));
+ return;
+ }
cxld->hpa_range = (struct range) {
.start = base,
.end = base + mock_auto_region_size - 1,
@@ -1255,9 +1303,11 @@ static void mock_init_hdm_type3_cxled(struct cxl_endpoint_decoder *cxled,
*/
iter = port;
for (i = 0; i < 2; i++) {
+ int id = 0;
+
dport = iter->parent_dport;
iter = dport->port;
- dev = device_find_child(&iter->dev, NULL, first_decoder);
+ dev = device_find_child(&iter->dev, &id, match_decoder_by_index);
/*
* Ancestor ports are guaranteed to be enumerated before
* @port, and all ports have at least one decoder.
@@ -1307,6 +1357,26 @@ static void mock_init_hdm_type3_cxled(struct cxl_endpoint_decoder *cxled,
cxld_registry_update(cxld);
put_device(dev);
+
+ if (!mock_zero_size_decoders)
+ continue;
+
+ /*
+ * Mirror the endpoint: commit the next two switch decoders
+ * as zero-size + locked so the empty-decoder layout extends
+ * end-to-end through the switch and host bridge.
+ */
+ for (id = 1; id <= 2; id++) {
+ dev = device_find_child(&iter->dev, &id,
+ match_decoder_by_index);
+ if (WARN_ON(!dev))
+ continue;
+ cxld = to_cxl_decoder(dev);
+ size_zero_mock_decoder_sw(cxld, base, i);
+ iter->commit_end = id;
+ cxld_registry_update(cxld);
+ put_device(dev);
+ }
}
}
@@ -2085,6 +2155,12 @@ static bool __init have_multiple_modparms(void)
count++;
if (type2_test)
count++;
+ if (mock_zero_size_decoders)
+ count++;
+
+ /* Zero-size decoders require decoder[0] to preserve commit order. */
+ if (fail_autoassemble && mock_zero_size_decoders)
+ return true;
return count > 1;
}
@@ -2493,6 +2569,9 @@ module_param(fail_autoassemble, bool, 0444);
MODULE_PARM_DESC(fail_autoassemble, "Simulate missing member of an auto-region");
module_param(type2_test, bool, 0444);
MODULE_PARM_DESC(type2_test, "Enable type 2 support testing");
+module_param(mock_zero_size_decoders, bool, 0444);
+MODULE_PARM_DESC(mock_zero_size_decoders,
+ "Mock committed, locked, empty decoders under host-bridge0");
module_init(cxl_test_init);
module_exit(cxl_test_exit);
MODULE_LICENSE("GPL v2");
--
2.43.0
next prev parent reply other threads:[~2026-07-08 10:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-08 10:40 [PATCH v7 0/2] Support zero-sized HDM decoders Richard Cheng
2026-07-08 10:40 ` [PATCH v7 1/2] cxl/hdm: Allow zero sized " Richard Cheng
2026-07-08 10:40 ` Richard Cheng [this message]
2026-07-08 18:35 ` [PATCH v7 2/2] tools/testing/cxl: Enable zero sized decoders under hb0 Alison Schofield
2026-07-09 2:33 ` Richard Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260708104024.68029-3-icheng@nvidia.com \
--to=icheng@nvidia.com \
--cc=alison.schofield@intel.com \
--cc=danwilliams@nvidia.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=djbw@kernel.org \
--cc=iweiny@kernel.org \
--cc=jic23@kernel.org \
--cc=kaihengf@nvidia.com \
--cc=kees@kernel.org \
--cc=kobak@nvidia.com \
--cc=kristinc@nvidia.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=mochs@nvidia.com \
--cc=newtonl@nvidia.com \
--cc=vaslot@nvidia.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox