From: Zhao Li <enderaoelyther@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Miri Korenblit <miriam.rachel.korenblit@intel.com>,
Brian Norris <briannorris@chromium.org>,
Francesco Dolcini <francesco@dolcini.it>,
Johannes Berg <johannes@sipsolutions.net>,
Jaewan Kim <jaewan@google.com>,
Daniel Gabay <daniel.gabay@intel.com>,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>,
Benjamin Berg <benjamin.berg@intel.com>,
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>,
Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
John Crispin <john@phrozen.org>,
Avinash Patil <patila@marvell.com>, Cathy Luo <cluo@marvell.com>,
"John W. Linville" <linville@tuxdriver.com>,
Aloka Dixit <quic_alokad@quicinc.com>,
Zhao Li <enderaoelyther@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH 7/8] wifi: mwifiex: validate action frame fixed fields
Date: Thu, 9 Jul 2026 03:59:10 +0800 [thread overview]
Message-ID: <20260708195911.84365-8-enderaoelyther@gmail.com> (raw)
In-Reply-To: <20260708195911.84365-1-enderaoelyther@gmail.com>
mwifiex_process_mgmt_packet() accepts an rx_pkt_length as small as a
4-address struct ieee80211_hdr plus the 2-byte firmware length prefix.
After the prefix is stripped, mwifiex_parse_mgmt_packet() can be called
with len equal to sizeof(struct ieee80211_hdr).
For an action frame the parser then reads the category byte just past
that header, and for a public action frame the action code at the next
byte, without checking that len covers them. A minimal-length action
frame therefore causes a one- or two-byte read past the end of the RX
buffer.
Reject frames shorter than the header, and require the category and
(for public action frames) action-code bytes to be present before
reading them.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Fixes: 72e5aa8d2a6d ("mwifiex: support for parsing TDLS discovery frames")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/66f148d83eb9f0970b9abbccc85d1b61244e54ad.camel@sipsolutions.net/
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
---
drivers/net/wireless/marvell/mwifiex/util.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/util.c b/drivers/net/wireless/marvell/mwifiex/util.c
index 7d3631d212236..e2d76c2d9b05b 100644
--- a/drivers/net/wireless/marvell/mwifiex/util.c
+++ b/drivers/net/wireless/marvell/mwifiex/util.c
@@ -313,13 +313,22 @@ mwifiex_parse_mgmt_packet(struct mwifiex_private *priv, u8 *payload, u16 len,
u8 category, action_code, *addr2;
struct ieee80211_hdr *ieee_hdr = (void *)payload;
+ if (len < sizeof(*ieee_hdr))
+ return -1;
+
stype = (le16_to_cpu(ieee_hdr->frame_control) & IEEE80211_FCTL_STYPE);
switch (stype) {
case IEEE80211_STYPE_ACTION:
+ if (len < sizeof(*ieee_hdr) + 1)
+ return -1;
+
category = *(payload + sizeof(struct ieee80211_hdr));
switch (category) {
case WLAN_CATEGORY_PUBLIC:
+ if (len < sizeof(*ieee_hdr) + 2)
+ return -1;
+
action_code = *(payload + sizeof(struct ieee80211_hdr)
+ 1);
if (action_code == WLAN_PUB_ACTION_TDLS_DISCOVER_RES) {
--
2.50.1 (Apple Git-155)
next prev parent reply other threads:[~2026-07-08 20:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-08 19:59 [PATCH 0/8] wifi: fix PMSR lifetime and frame validation issues Zhao Li
2026-07-08 19:59 ` [PATCH 1/8] wifi: mac80211_hwsim: clear PMSR request state on abort Zhao Li
2026-07-08 19:59 ` [PATCH 2/8] wifi: mac80211_hwsim: authenticate PMSR report senders Zhao Li
2026-07-08 19:59 ` [PATCH 3/8] wifi: iwlwifi: mld: abort active PMSR requests Zhao Li
2026-07-08 19:59 ` [PATCH 4/8] wifi: cfg80211: guard optional PMSR nominal time Zhao Li
2026-07-08 19:59 ` [PATCH 5/8] wifi: mac80211: validate probe response countdown offsets Zhao Li
2026-07-08 19:59 ` [PATCH 6/8] wifi: mac80211: validate S1G TWT params before driver setup Zhao Li
2026-07-08 19:59 ` Zhao Li [this message]
2026-07-08 19:59 ` [PATCH 8/8] wifi: nl80211: clean up color-change beacon data on errors Zhao Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260708195911.84365-8-enderaoelyther@gmail.com \
--to=enderaoelyther@gmail.com \
--cc=benjamin.berg@intel.com \
--cc=briannorris@chromium.org \
--cc=cluo@marvell.com \
--cc=daniel.gabay@intel.com \
--cc=emmanuel.grumbach@intel.com \
--cc=francesco@dolcini.it \
--cc=jaewan@google.com \
--cc=johannes@sipsolutions.net \
--cc=john@phrozen.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lorenzo@kernel.org \
--cc=miriam.rachel.korenblit@intel.com \
--cc=pagadala.yesu.anjaneyulu@intel.com \
--cc=patila@marvell.com \
--cc=peddolla.reddy@oss.qualcomm.com \
--cc=quic_alokad@quicinc.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox