From: "Carlos López" <clopez@suse.de>
To: stable@vger.kernel.org
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
"Sean Christopherson" <seanjc@google.com>,
"Kai Huang" <kai.huang@intel.com>,
"Yosry Ahmed" <yosry@kernel.org>, "Carlos López" <clopez@suse.de>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Ingo Molnar" <mingo@redhat.com>,
"Borislav Petkov" <bp@alien8.de>,
"Dave Hansen" <dave.hansen@linux.intel.com>,
x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
"H. Peter Anvin" <hpa@zytor.com>
Subject: [PATCH RESEND 6.18.y 1/3] KVM: x86: Move update_cr8_intercept() to lapic.c
Date: Thu, 9 Jul 2026 09:22:45 +0200 [thread overview]
Message-ID: <20260709072247.3305784-3-clopez@suse.de> (raw)
In-Reply-To: <20260709072247.3305784-2-clopez@suse.de>
From: Sean Christopherson <seanjc@google.com>
[ Upstream Commit c7722e5e1daeeabbd9f969554d52bb7158120b27 ]
Move update_cr8_intercept() to lapic.c so that it's globally visible
in anticipation of extracting most of the register-specific code out of
x86.c and into a new compilation unit. Opportunistically prefix the
helper kvm_lapic_ to make its role/scope more obvious.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260529222223.870923-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Carlos López <clopez@suse.de>
---
arch/x86/kvm/lapic.c | 26 ++++++++++++++++++++++++++
arch/x86/kvm/lapic.h | 1 +
arch/x86/kvm/x86.c | 34 +++-------------------------------
3 files changed, 30 insertions(+), 31 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 0e842dad4194..4a6a8d8c7626 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2754,6 +2754,32 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
return (tpr & 0xf0) >> 4;
}
+void kvm_lapic_update_cr8_intercept(struct kvm_vcpu *vcpu)
+{
+ int max_irr, tpr;
+
+ if (!kvm_x86_ops.update_cr8_intercept)
+ return;
+
+ if (!lapic_in_kernel(vcpu))
+ return;
+
+ if (vcpu->arch.apic->apicv_active)
+ return;
+
+ if (!vcpu->arch.apic->vapic_addr)
+ max_irr = kvm_lapic_find_highest_irr(vcpu);
+ else
+ max_irr = -1;
+
+ if (max_irr != -1)
+ max_irr >>= 4;
+
+ tpr = kvm_lapic_get_cr8(vcpu);
+
+ kvm_x86_call(update_cr8_intercept)(vcpu, tpr, max_irr);
+}
+
static void __kvm_apic_set_base(struct kvm_vcpu *vcpu, u64 value)
{
u64 old_value = vcpu->arch.apic_base;
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index e5f5a222eced..959380b4c067 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -100,6 +100,7 @@ int kvm_apic_accept_events(struct kvm_vcpu *vcpu);
void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event);
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
+void kvm_lapic_update_cr8_intercept(struct kvm_vcpu *vcpu);
void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu);
void kvm_apic_set_version(struct kvm_vcpu *vcpu);
void kvm_apic_after_set_mcg_cap(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a21ebe04aa23..28771be285a1 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -126,7 +126,6 @@ static u64 __read_mostly efer_reserved_bits = ~((u64)EFER_SCE);
KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST | \
KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST)
-static void update_cr8_intercept(struct kvm_vcpu *vcpu);
static void process_nmi(struct kvm_vcpu *vcpu);
static void __kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
static void store_regs(struct kvm_vcpu *vcpu);
@@ -5357,7 +5356,7 @@ static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
r = kvm_apic_set_state(vcpu, s);
if (r)
return r;
- update_cr8_intercept(vcpu);
+ kvm_lapic_update_cr8_intercept(vcpu);
return 0;
}
@@ -10565,33 +10564,6 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
kvm_run->flags |= KVM_RUN_X86_GUEST_MODE;
}
-static void update_cr8_intercept(struct kvm_vcpu *vcpu)
-{
- int max_irr, tpr;
-
- if (!kvm_x86_ops.update_cr8_intercept)
- return;
-
- if (!lapic_in_kernel(vcpu))
- return;
-
- if (vcpu->arch.apic->apicv_active)
- return;
-
- if (!vcpu->arch.apic->vapic_addr)
- max_irr = kvm_lapic_find_highest_irr(vcpu);
- else
- max_irr = -1;
-
- if (max_irr != -1)
- max_irr >>= 4;
-
- tpr = kvm_lapic_get_cr8(vcpu);
-
- kvm_x86_call(update_cr8_intercept)(vcpu, tpr, max_irr);
-}
-
-
int kvm_check_nested_events(struct kvm_vcpu *vcpu)
{
if (kvm_test_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
@@ -11298,7 +11270,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
kvm_x86_call(enable_irq_window)(vcpu);
if (kvm_lapic_enabled(vcpu)) {
- update_cr8_intercept(vcpu);
+ kvm_lapic_update_cr8_intercept(vcpu);
kvm_lapic_sync_to_vapic(vcpu);
}
}
@@ -12424,7 +12396,7 @@ static int __set_sregs_common(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs,
kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
- update_cr8_intercept(vcpu);
+ kvm_lapic_update_cr8_intercept(vcpu);
/* Older userspace won't unhalt the vcpu on reset. */
if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
--
2.51.0
next prev parent reply other threads:[~2026-07-09 7:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-09 7:22 [PATCH RESEND 6.18.y 0/3] KVM: x86: Backports for VM entry failure due to stale CR8 intercept Carlos López
2026-07-09 7:22 ` Carlos López [this message]
2026-07-09 7:22 ` [PATCH RESEND 6.18.y 2/3] KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode Carlos López
2026-07-09 7:22 ` [PATCH RESEND 6.18.y 3/3] KVM: x86: Unconditionally recompute CR8 intercept on PPR update Carlos López
2026-07-09 13:04 ` [PATCH RESEND 6.18.y 0/3] KVM: x86: Backports for VM entry failure due to stale CR8 intercept Greg KH
2026-07-09 14:28 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260709072247.3305784-3-clopez@suse.de \
--to=clopez@suse.de \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kai.huang@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yosry@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox