From: Steffen Persvold <spersvold@gmail.com>
To: "Will Deacon" <will@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>
Cc: Rob Herring <robh@kernel.org>,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Steffen Persvold <spersvold@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH] PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
Date: Thu, 9 Jul 2026 14:24:46 +0200 [thread overview]
Message-ID: <20260709122446.3151899-1-spersvold@gmail.com> (raw)
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
[ 1.430647] Unable to handle kernel NULL pointer dereference at virtual address 00000800
[ 1.439441] Oops [#1]
[ 1.442152] CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
[ 1.448753] Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
[ 1.454968] epc : pci_generic_config_read+0x40/0xb0
[ 1.460652] ra : pci_generic_config_read+0x2c/0xb0
[ 1.534729] [<c038db9c>] pci_generic_config_read+0x40/0xb0
[ 1.541096] [<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[ 1.547623] [<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[ 1.555010] [<c039245c>] pci_scan_single_device+0xa4/0x11c
[ 1.561273] [<c0392570>] pci_scan_slot+0x9c/0x23c
[ 1.566716] [<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[ 1.573275] [<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[ 1.579650] [<c0393e54>] pci_host_probe+0x20/0xc8
[ 1.591396] [<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
---
drivers/pci/controller/pci-host-generic.c | 11 +----------
drivers/pci/ecam.c | 13 +++++++++++++
include/linux/pci-ecam.h | 3 +++
3 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/controller/pci-host-generic.c b/drivers/pci/controller/pci-host-generic.c
index c1bc0d34..9e85c6e9 100644
--- a/drivers/pci/controller/pci-host-generic.c
+++ b/drivers/pci/controller/pci-host-generic.c
@@ -16,15 +16,6 @@
#include "pci-host-common.h"
-static const struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = {
- .bus_shift = 16,
- .pci_ops = {
- .map_bus = pci_ecam_map_bus,
- .read = pci_generic_config_read,
- .write = pci_generic_config_write,
- }
-};
-
static bool pci_dw_valid_device(struct pci_bus *bus, unsigned int devfn)
{
struct pci_config_window *cfg = bus->sysdata;
@@ -60,7 +51,7 @@ static const struct pci_ecam_ops pci_dw_ecam_bus_ops = {
static const struct of_device_id gen_pci_of_match[] = {
{ .compatible = "pci-host-cam-generic",
- .data = &gen_pci_cfg_cam_bus_ops },
+ .data = &pci_generic_cam_ops },
{ .compatible = "pci-host-ecam-generic",
.data = &pci_generic_ecam_ops },
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index 119de32f..a9b3bce2 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -208,6 +208,19 @@ const struct pci_ecam_ops pci_generic_ecam_ops = {
};
EXPORT_SYMBOL_GPL(pci_generic_ecam_ops);
+/* CAM ops */
+const struct pci_ecam_ops pci_generic_cam_ops = {
+ .bus_shift = 16,
+ .pci_ops = {
+ .add_bus = pci_ecam_add_bus,
+ .remove_bus = pci_ecam_remove_bus,
+ .map_bus = pci_ecam_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+ }
+};
+EXPORT_SYMBOL_GPL(pci_generic_cam_ops);
+
#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
/* ECAM ops for 32-bit access only (non-compliant) */
const struct pci_ecam_ops pci_32b_ops = {
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index d9306514..044f67ce 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -81,6 +81,9 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
/* default ECAM ops */
extern const struct pci_ecam_ops pci_generic_ecam_ops;
+/* default CAM ops */
+extern const struct pci_ecam_ops pci_generic_cam_ops;
+
#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
extern const struct pci_ecam_ops pci_32b_ops; /* 32-bit accesses only */
extern const struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */
base-commit: 53bf92818a8362815708fc7b18e6d2c6a5fc665b
--
2.40.1
next reply other threads:[~2026-07-09 12:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-09 12:24 Steffen Persvold [this message]
2026-07-09 20:09 ` [PATCH] PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems Bjorn Helgaas
-- strict thread matches above, loose matches on Subject: below --
2024-08-20 14:04 Steffen Persvold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260709122446.3151899-1-spersvold@gmail.com \
--to=spersvold@gmail.com \
--cc=bhelgaas@google.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=stable@vger.kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox