[PATCH RFC v3 2/7] mfd: ls2kbmc: Sanity check for the connected pci port

[Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@kernel.org>]

From: Miao Wang <shankerwangmiao@gmail.com>

When the bmc resets, the recovery procedure require to reconfigure the
parent device. The driver assumes that the parent device should be LS7A.
Add a sanity check on initialization to ensure this and prevent from
accidentally operating on non-LS7A ports.

Fixes: d952bba3fbb5 ("mfd: ls2kbmc: Add Loongson-2K BMC reset function support")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
---
 drivers/mfd/ls2k-bmc-core.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/mfd/ls2k-bmc-core.c b/drivers/mfd/ls2k-bmc-core.c
index 27f6e096404d67459038a0607378057ec7ef69ab..b02e4955e9b04f517892a18b2ef103b5e481a238 100644
--- a/drivers/mfd/ls2k-bmc-core.c
+++ b/drivers/mfd/ls2k-bmc-core.c
@@ -35,6 +35,15 @@
 #define LS2K_IPMI3_RES_START		(LS2K_IPMI2_RES_START + LS2K_IPMI_RES_SIZE)
 #define LS2K_IPMI4_RES_START		(LS2K_IPMI3_RES_START + LS2K_IPMI_RES_SIZE)
 
+/* LS7A port Device IDs */
+#define DEV_LS7A1K_PCIE_PORT0	0x7a09
+#define DEV_LS7A1K_PCIE_PORT1	0x7a19
+#define DEV_LS7A1K_PCIE_PORT2	0x7a29
+#define DEV_LS7A2K_PCIE_PORT0	0x7a39
+#define DEV_LS7A2K_PCIE_PORT1	0x7a49
+#define DEV_LS7A2K_PCIE_PORT2	0x7a59
+#define DEV_LS7A2K_PCIE_PORT3	0x7a69
+
 #define LS7A_PCI_CFG_SIZE		0x100
 
 /* LS7A bridge registers */
@@ -477,6 +486,24 @@ static int ls2k_bmc_parse_mode(struct pci_dev *pdev, struct simplefb_platform_da
 	return -EINVAL;
 }
 
+static const struct pci_device_id ls7a_ports[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A1K_PCIE_PORT0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A1K_PCIE_PORT1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A1K_PCIE_PORT2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A2K_PCIE_PORT0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A2K_PCIE_PORT1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A2K_PCIE_PORT2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, DEV_LS7A2K_PCIE_PORT3) },
+	{ }
+};
+
+static bool ls2k_check_parent(struct pci_dev *dev)
+{
+	struct pci_dev *parent = dev->bus->self;
+
+	return parent && pci_match_id(ls7a_ports, parent) != NULL;
+}
+
 static int ls2k_bmc_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct simplefb_platform_data pd;
@@ -488,6 +515,11 @@ static int ls2k_bmc_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (ret)
 		return ret;
 
+	if (!ls2k_check_parent(dev)) {
+		dev_err(&dev->dev, "Expected to be connected to LS7A PCI-E port\n");
+		return -ENODEV;
+	}
+
 	ddata = devm_kzalloc(&dev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;

-- 
2.49.0