The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Steven Rostedt <rostedt@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Michael Bommarito <michael.bommarito@gmail.com>
Subject: [for-linus][PATCH 1/4] selftests/user_events: Wait for deferred event teardown after unregister
Date: Fri, 10 Jul 2026 21:20:41 -0400	[thread overview]
Message-ID: <20260711012103.636365268@kernel.org> (raw)
In-Reply-To: 20260711012040.762290323@kernel.org

From: Michael Bommarito <michael.bommarito@gmail.com>

Unregistering a user event now defers the drop of the enabler's event
reference (and the freeing of the enabler) past an RCU grace period. As a
result DIAG_IOCSDEL can transiently fail with -EBUSY while that last
reference is still being dropped, where it previously succeeded
immediately.

Two tests assumed the delete takes effect the instant the unregister
returns:

  - abi_test "flags" deletes the event right after disabling it.
  - perf_test's fixture teardown clear() deletes __test_event before the
    next test registers the same name; a stale event makes the following
    registration fail with -EADDRINUSE.

Retry the delete until it succeeds (or the event is already gone) with a
bounded wait, matching the existing wait_for_delete() idiom in the same
suite, so the tests are robust to the deferred teardown.

Link: https://patch.msgid.link/20260707180240.2887081-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 .../testing/selftests/user_events/abi_test.c  | 29 ++++++++++++++++++-
 .../testing/selftests/user_events/perf_test.c | 26 +++++++++++++++--
 2 files changed, 51 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/user_events/abi_test.c b/tools/testing/selftests/user_events/abi_test.c
index 85892b3b719c..b71813eaf5c0 100644
--- a/tools/testing/selftests/user_events/abi_test.c
+++ b/tools/testing/selftests/user_events/abi_test.c
@@ -132,6 +132,33 @@ static int event_delete(void)
 	return ret;
 }
 
+/*
+ * Deleting an event drops its last reference, but an unregister may defer
+ * that put (and the freeing of the associated enabler) past an RCU grace
+ * period. The delete can therefore transiently fail with -EBUSY while the
+ * previous reference is still being dropped. Retry only on that transient
+ * failure; treat an already-deleted event (-ENOENT) as success and return
+ * any other error immediately rather than spinning for the full timeout.
+ */
+static int wait_for_event_delete(void)
+{
+	int i, ret;
+
+	for (i = 0; i < 10000; ++i) {
+		ret = event_delete();
+
+		if (ret == 0 || errno == ENOENT)
+			return 0;
+
+		if (errno != EBUSY)
+			return ret;
+
+		usleep(1000);
+	}
+
+	return ret;
+}
+
 static int reg_enable_multi(void *enable, int size, int bit, int flags,
 			    char *args)
 {
@@ -262,7 +289,7 @@ TEST_F(user, flags) {
 	ASSERT_TRUE(event_exists());
 
 	/* Ensure we can delete it */
-	ASSERT_EQ(0, event_delete());
+	ASSERT_EQ(0, wait_for_event_delete());
 
 	/* USER_EVENT_REG_MAX or above is not allowed */
 	ASSERT_EQ(-1, reg_enable_flags(&self->check, sizeof(int), 0,
diff --git a/tools/testing/selftests/user_events/perf_test.c b/tools/testing/selftests/user_events/perf_test.c
index cafec0e52eb3..5727cb5b914c 100644
--- a/tools/testing/selftests/user_events/perf_test.c
+++ b/tools/testing/selftests/user_events/perf_test.c
@@ -85,6 +85,7 @@ static int get_offset(void)
 static int clear(int *check)
 {
 	struct user_unreg unreg = {0};
+	int i, ret;
 
 	unreg.size = sizeof(unreg);
 	unreg.disable_bit = 31;
@@ -99,13 +100,32 @@ static int clear(int *check)
 		if (errno != ENOENT)
 			return -1;
 
-	if (ioctl(fd, DIAG_IOCSDEL, "__test_event") == -1)
-		if (errno != ENOENT)
+	/*
+	 * Deleting the event drops its last reference, but the unregister
+	 * above defers that put (and the freeing of the enabler) past an RCU
+	 * grace period. The delete can therefore transiently fail with -EBUSY
+	 * until that reference is dropped. Retry for up to ~10 seconds so the
+	 * event is actually gone before the next test registers the same name.
+	 */
+	for (i = 0; i < 10000; ++i) {
+		ret = ioctl(fd, DIAG_IOCSDEL, "__test_event");
+
+		if (ret == 0 || errno == ENOENT) {
+			ret = 0;
+			break;
+		}
+
+		if (errno != EBUSY) {
+			close(fd);
 			return -1;
+		}
+
+		usleep(1000);
+	}
 
 	close(fd);
 
-	return 0;
+	return ret;
 }
 
 FIXTURE(user) {
-- 
2.53.0



  reply	other threads:[~2026-07-11  1:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-11  1:20 [for-linus][PATCH 0/4] tracing: Fixes for v7.2 Steven Rostedt
2026-07-11  1:20 ` Steven Rostedt [this message]
2026-07-11  1:20 ` [for-linus][PATCH 2/4] tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path Steven Rostedt
2026-07-11  1:20 ` [for-linus][PATCH 3/4] tracing/remotes: Fix struct_len in trace_remote_alloc_buffer() Steven Rostedt
2026-07-11  1:20 ` [for-linus][PATCH 4/4] ring-buffer: Allow sparse CPU masks in ring_buffer_desc() Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260711012103.636365268@kernel.org \
    --to=rostedt@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mhiramat@kernel.org \
    --cc=michael.bommarito@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox