[PATCH v7 13/13] ARM: dts: zte: Declare zx297520v3 CRM device nodes

["Stefan Dösinger" <stefandoesinger@gmail.com>]

This makes use of the driver added in the previous patches. It wires up
the uart clocks and resets and allows getting rid of the placeholder
uartclk node.

Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>

---

Version 7:
Add phy nodes to topcrm
Remove syscon from matrixclk again
Adapt remove now-removed extra clk inputs from matrix
Add reset to LSP
osc26m -> clock-26m for the fixed rate clocks, likewise for 32k

Version 6:
Add syscon to matrixclk

Version 5:
Re-name from *clk to *crm
Add the syscon-reboot node here because the binding requires it
Re-add accidentally dropped uart2 IRQ
---
 arch/arm/boot/dts/zte/zx297520v3.dtsi | 92 ++++++++++++++++++++++++++++++++---
 1 file changed, 84 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/zte/zx297520v3.dtsi b/arch/arm/boot/dts/zte/zx297520v3.dtsi
index a16c30a164bb..b479d097f004 100644
--- a/arch/arm/boot/dts/zte/zx297520v3.dtsi
+++ b/arch/arm/boot/dts/zte/zx297520v3.dtsi
@@ -4,6 +4,8 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/zte,zx297520v3-reset.h>
+#include <dt-bindings/clock/zte,zx297520v3-clk.h>
 
 / {
 	#address-cells = <1>;
@@ -20,13 +22,16 @@ cpu@0 {
 		};
 	};
 
-	/* Base bus clock and default for the UART. It will be replaced once a clock driver has
-	 * been added.
-	 */
-	uartclk: uartclk-26000000 {
-		#clock-cells = <0>;
+	osc26m: clock-26m {
 		compatible = "fixed-clock";
 		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	osc32k: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	timer {
@@ -70,13 +75,82 @@ gic: interrupt-controller@f2000000 {
 			      <0xf2040000 0x20000>;
 		};
 
+		topcrm: clock-controller@13b000 {
+			compatible = "zte,zx297520v3-topcrm", "syscon";
+			reg = <0x0013b000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&osc26m>, <&osc32k>;
+			clock-names = "osc26m", "osc32k";
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x0>;
+				value = <0x1>;
+				mask = <0x1>;
+			};
+
+			usb-phy@84 {
+				compatible = "zte,zx297520v3-usb-phy";
+				reg = <0x84>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "usb-up", "usb-down", "hsic-up", "hsic-down";
+				resets = <&topcrm ZX297520V3_USB_PHY_RESET>,
+					 <&topcrm ZX297520V3_HSIC_PHY_RESET>;
+				reset-names = "usb", "hsic";
+				#phy-cells = <1>;
+			};
+		};
+
+		matrixcrm: clock-controller@1306000 {
+			compatible = "zte,zx297520v3-matrixcrm";
+			reg = <0x01306000 0x400>;
+			clocks = <&osc26m>, <&osc32k>,
+				 <&topcrm ZX297520V3_MPLL>, <&topcrm ZX297520V3_MPLL_D5>,
+				 <&topcrm ZX297520V3_DPLL>, <&topcrm ZX297520V3_GPLL>,
+				 <&topcrm ZX297520V3_GPLL_D2>, <&topcrm ZX297520V3_GATED_OSC26M>;
+			clock-names = "osc26m", "osc32k", "mpll", "mpll-d5", "dpll",
+				"gpll", "gpll-d2", "wclk-osc26m";
+			#clock-cells = <1>;
+			#hwlock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lspcrm: clock-controller@1400000 {
+			compatible = "zte,zx297520v3-lspcrm";
+			reg = <0x01400000 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&matrixcrm ZX297520V3_LSP_MPLL_D5_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_MPLL_D4_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_MPLL_D6_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_MPLL_D8_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_MPLL_D12_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_OSC26M_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_OSC32K_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_PCLK>,
+				 <&matrixcrm ZX297520V3_LSP_TDM_WCLK>,
+				 <&matrixcrm ZX297520V3_LSP_DPLL_D4_WCLK>;
+			clock-names = "mpll-d5", "mpll-d4", "mpll-d6", "mpll-d8", "mpll-d12",
+				      "osc26m", "osc32k", "pclk", "tdm-wclk", "dpll-d4";
+			resets = <&matrixcrm ZX297520V3_LSP_RESET>;
+		};
+
+
 		uart0: serial@131000 {
 			compatible = "arm,pl011", "arm,primecell";
 			arm,primecell-periphid = <0x0018c011>;
 			reg = <0x00131000 0x1000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&uartclk>;
+			clocks = <&topcrm ZX297520V3_UART0_WCLK>, <&topcrm ZX297520V3_UART0_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&topcrm ZX297520V3_UART0_RESET>;
 			status = "disabled";
 		};
 
@@ -85,8 +159,9 @@ uart1: serial@1408000 {
 			arm,primecell-periphid = <0x0018c011>;
 			reg = <0x01408000 0x1000>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&uartclk>;
+			clocks = <&lspcrm ZX297520V3_UART1_WCLK>, <&lspcrm ZX297520V3_UART1_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&lspcrm ZX297520V3_UART1_RESET>;
 			status = "disabled";
 		};
 
@@ -95,8 +170,9 @@ uart2: serial@140d000 {
 			arm,primecell-periphid = <0x0018c011>;
 			reg = <0x0140d000 0x1000>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&uartclk>;
+			clocks = <&lspcrm ZX297520V3_UART2_WCLK>, <&lspcrm ZX297520V3_UART2_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&lspcrm ZX297520V3_UART2_RESET>;
 			status = "disabled";
 		};
 	};

-- 
2.54.0