From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Lars-Peter Clausen <lars@metafoo.de>,
nuno.sa@analog.com, Shenghao Ding <shenghao-ding@ti.com>,
Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>, Sen Wang <sen@ti.com>,
Steven Eckhoff <steven.eckhoff.opensource@gmail.com>,
Srinivas Kandagatla <srini@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Linus Walleij <linusw@kernel.org>,
u.kleine-koenig@baylibre.com,
Thorsten Blum <thorsten.blum@linux.dev>,
Kees Cook <kees@kernel.org>, Chen Ni <nichen@iscas.ac.cn>,
Bartosz Golaszewski <brgl@kernel.org>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
Pengpeng Hou <pengpeng@iscas.ac.cn>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 04/26] ASoC: codecs: tas2781: Use guard() for mutex locks
Date: Thu, 23 Jul 2026 11:53:05 +0700 [thread overview]
Message-ID: <20260723045327.28260-5-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260723045327.28260-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/codecs/tas2781-comlib-i2c.c | 5 ++---
sound/soc/codecs/tas2781-i2c.c | 32 +++++++++++----------------
2 files changed, 15 insertions(+), 22 deletions(-)
diff --git a/sound/soc/codecs/tas2781-comlib-i2c.c b/sound/soc/codecs/tas2781-comlib-i2c.c
index e24d56a14cfd..79b5f5b04c74 100644
--- a/sound/soc/codecs/tas2781-comlib-i2c.c
+++ b/sound/soc/codecs/tas2781-comlib-i2c.c
@@ -6,6 +6,7 @@
//
// Author: Shenghao Ding <shenghao-ding@ti.com>
+#include <linux/cleanup.h>
#include <linux/crc8.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
@@ -342,7 +343,7 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
/* Codec Lock Hold to ensure that codec_probe and firmware parsing and
* loading do not simultaneously execute.
*/
- mutex_lock(&tas_priv->codec_lock);
+ guard(mutex)(&tas_priv->codec_lock);
if (tas_priv->name_prefix)
scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin",
@@ -360,8 +361,6 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n",
ret);
- /* Codec Lock Release*/
- mutex_unlock(&tas_priv->codec_lock);
return ret;
}
EXPORT_SYMBOL_GPL(tascodec_init);
diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
index 9e6f0ad5f05d..16dd0989e5e2 100644
--- a/sound/soc/codecs/tas2781-i2c.c
+++ b/sound/soc/codecs/tas2781-i2c.c
@@ -13,6 +13,7 @@
// Author: Kevin Lu <kevin-lu@ti.com>
//
+#include <linux/cleanup.h>
#include <linux/crc8.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
@@ -843,12 +844,12 @@ static int tasdevice_digital_gain_get(
unsigned char data[4];
int ret;
- mutex_lock(&tas_dev->codec_lock);
+ guard(mutex)(&tas_dev->codec_lock);
/* Read the primary device */
ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4);
if (ret) {
dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__);
- goto out;
+ return ret;
}
target = get_unaligned_be32(&data[0]);
@@ -868,8 +869,7 @@ static int tasdevice_digital_gain_get(
/* find out the member same as or closer to the current volume */
ucontrol->value.integer.value[0] =
abs(target - ar_l) <= abs(target - ar_r) ? l : r;
-out:
- mutex_unlock(&tas_dev->codec_lock);
+
return 0;
}
@@ -882,29 +882,26 @@ static int tasdevice_digital_gain_put(
struct snd_soc_component *codec = snd_kcontrol_chip(kcontrol);
struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec);
int vol = ucontrol->value.integer.value[0];
- int status = 0, max = mc->max, rc = 1;
+ int status = 0, max = mc->max;
int i, ret;
unsigned int reg = mc->reg;
unsigned int volrd, volwr;
unsigned char data[4];
vol = clamp(vol, 0, max);
- mutex_lock(&tas_dev->codec_lock);
+ guard(mutex)(&tas_dev->codec_lock);
/* Read the primary device */
ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4);
if (ret) {
dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__);
- rc = -1;
- goto out;
+ return -1;
}
volrd = get_unaligned_be32(&data[0]);
volwr = get_unaligned_be32(tas_dev->dvc_tlv_table[vol]);
- if (volrd == volwr) {
- rc = 0;
- goto out;
- }
+ if (volrd == volwr)
+ return 0;
for (i = 0; i < tas_dev->ndev; i++) {
ret = tasdevice_dev_bulk_write(tas_dev, i, reg,
@@ -918,10 +915,9 @@ static int tasdevice_digital_gain_put(
}
if (status)
- rc = -1;
-out:
- mutex_unlock(&tas_dev->codec_lock);
- return rc;
+ return -1;
+
+ return 1;
}
static const struct snd_kcontrol_new tasdevice_cali_controls[] = {
@@ -1766,12 +1762,10 @@ static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w,
int state = 0;
/* Codec Lock Hold */
- mutex_lock(&tas_priv->codec_lock);
+ guard(mutex)(&tas_priv->codec_lock);
if (event == SND_SOC_DAPM_PRE_PMD)
state = 1;
tasdevice_tuning_switch(tas_priv, state);
- /* Codec Lock Release*/
- mutex_unlock(&tas_priv->codec_lock);
return 0;
}
--
2.43.0
next prev parent reply other threads:[~2026-07-23 4:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 4:53 [PATCH 00/26] ASoC: codecs: Use guard() for mutex & spin locks - part 3 phucduc.bui
2026-07-23 4:53 ` [PATCH 01/26] ASoC: codecs: sigmadsp: Use guard() for mutex locks phucduc.bui
2026-07-23 4:53 ` [PATCH 02/26] ASoC: codecs: sta350: " phucduc.bui
2026-07-23 4:53 ` [PATCH 03/26] ASoC: codecs: sta32x: " phucduc.bui
2026-07-23 4:53 ` phucduc.bui [this message]
2026-07-23 4:53 ` [PATCH 05/26] ASoC: codecs: tas2783: " phucduc.bui
2026-07-23 4:53 ` [PATCH 06/26] ASoC: codecs: tas5805m: " phucduc.bui
2026-07-23 4:53 ` [PATCH 07/26] ASoC: codecs: tlv320dac33: Use guard() for mutex & spin locks phucduc.bui
2026-07-23 4:53 ` [PATCH 08/26] ASoC: codecs: tscs42xx: Use guard() for mutex locks phucduc.bui
2026-07-23 4:53 ` [PATCH 09/26] ASoC: codecs: tscs454: " phucduc.bui
2026-07-23 4:53 ` [PATCH 10/26] ASoC: codecs: twl6040: " phucduc.bui
2026-07-23 4:53 ` [PATCH 11/26] ASoC: codecs: wcd-mbhc: " phucduc.bui
2026-07-23 4:53 ` [PATCH 12/26] ASoC: codecs: wcd934x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 13/26] ASoC: codecs: wcd937x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 14/26] ASoC: codecs: wcd938x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 15/26] ASoC: codecs: wcd939x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 16/26] ASoC: codecs: wm0010: Use guard() for mutex & spin locks phucduc.bui
2026-07-23 4:53 ` [PATCH 17/26] ASoC: codecs: wm2000: Use guard() for mutex locks phucduc.bui
2026-07-23 4:53 ` [PATCH 18/26] ASoC: codecs: wm5102: " phucduc.bui
2026-07-23 4:53 ` [PATCH 19/26] ASoC: codecs: wm8731: " phucduc.bui
2026-07-23 4:53 ` [PATCH 20/26] ASoC: codecs: wm8903: " phucduc.bui
2026-07-23 4:53 ` [PATCH 21/26] ASoC: codecs: wm8958: " phucduc.bui
2026-07-23 4:53 ` [PATCH 22/26] ASoC: codecs: wm8962: " phucduc.bui
2026-07-23 4:53 ` [PATCH 23/26] ASoC: codecs: wm8994: " phucduc.bui
2026-07-23 4:53 ` [PATCH 24/26] ASoC: codecs: wm971x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 25/26] ASoC: codecs: wm_adsp: " phucduc.bui
2026-07-23 4:53 ` [PATCH 26/26] ASoC: codecs: wsa88xx: " phucduc.bui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723045327.28260-5-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=baojun.xu@ti.com \
--cc=brgl@kernel.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=kees@kernel.org \
--cc=kevin-lu@ti.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nichen@iscas.ac.cn \
--cc=nuno.sa@analog.com \
--cc=patches@opensource.cirrus.com \
--cc=pengpeng@iscas.ac.cn \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sebastian.krzyszkowiak@puri.sm \
--cc=sen@ti.com \
--cc=shenghao-ding@ti.com \
--cc=shengjiu.wang@nxp.com \
--cc=srini@kernel.org \
--cc=steven.eckhoff.opensource@gmail.com \
--cc=thorsten.blum@linux.dev \
--cc=tiwai@suse.com \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox