[PATCH] platform/x86: hp-wmi: Add OMEN board 8BA9 thermal profile support

[Suryansh Singh <technosfan14@gmail.com>]

The HP OMEN 16-wd0xxx (board ID: 8BA9) has the same WMI interface
as other Victus S boards, but requires quirks for correctly
switching thermal profile.

Add the DMI board name to victus_s_thermal_profile_boards[] table
and map it to omen_v1_thermal_params.

Without this entry, platform profile switching is unavailable,
preventing fan RPM reporting and controlling.

Tested on:
  HP OMEN 16-wd0012TX
  DMI Board Name: 8BA9

It has been confirmed that the platform profile is registered
successfully, and the fan RPMs are readable and controllable.

Signed-off-by: Suryansh Singh <technosfan14@gmail.com>
---
 drivers/platform/x86/hp/hp-wmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 8ba286ed8..052c64aa0 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -201,6 +201,10 @@ static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8A4D") },
 		.driver_data = (void *)&omen_v1_legacy_thermal_params,
 	},
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BA9") },
+		.driver_data = (void *)&omen_v1_thermal_params,
+	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BAB") },
 		.driver_data = (void *)&omen_v1_thermal_params,
-- 
2.55.0