From: Tharit Tangkijwanichakul <tharitt97@gmail.com>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Hans Verkuil <hverkuil@kernel.org>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-kernel-mentees@lists.linux.dev, skhan@linuxfoundation.org,
me@brighamcampbell.com, jkoolstra@xs4all.nl,
Frank.li@oss.nxp.com,
Tharit Tangkijwanichakul <tharitt97@gmail.com>
Subject: [PATCH v3] media: hantro: release runtime resources when device_run fails
Date: Sun, 26 Jul 2026 02:42:43 +0000 [thread overview]
Message-ID: <20260726024243.730-1-tharitt97@gmail.com> (raw)
In-Reply-To: <20260724131208.2315-1-tharitt97@gmail.com>
device_run() acquires a runtime PM reference and enables the VPU clocks
before invoking the codec-specific run callback.
If clk_bulk_enable() fails, the runtime PM reference is left held. If
the codec-specific run callback fails, both the enabled clocks and the
runtime PM reference are left held.
Make the clocks part of the device's runtime PM state by enabling them
from the runtime-resume callback and disabling them from the
runtime-suspend callback.
Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Tharit Tangkijwanichakul <tharitt97@gmail.com>
---
Changes in v3:
- Move clock enable and disable operations into the runtime PM
callbacks, as suggested by Frank Li.
- Remove vpu from argument in hantro_job_finish() and
hantro_job_finish_no_pm(). It is accessible by ctx.
Changes in v2:
- Fix the codec run failure path to disable the clocks before dropping
the runtime PM reference.
- Use a local vpu variable in device_run().
Tested on a ROCK 5B (RK3588) using the Hantro G1 decoder and Fluster:
H.264 (JVT-AVC_V1): 129/135, unchanged
MPEG-2 (MPEG2_VIDEO-MAIN): 23/43, unchanged
VP8 (VP8-TEST-VECTORS): 61/61, unchanged
.../media/platform/verisilicon/hantro_drv.c | 68 +++++++++++--------
1 file changed, 39 insertions(+), 29 deletions(-)
diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
index 2e81877f640f..7978bb72569e 100644
--- a/drivers/media/platform/verisilicon/hantro_drv.c
+++ b/drivers/media/platform/verisilicon/hantro_drv.c
@@ -59,8 +59,7 @@ static const struct v4l2_event hantro_eos_event = {
.type = V4L2_EVENT_EOS
};
-static void hantro_job_finish_no_pm(struct hantro_dev *vpu,
- struct hantro_ctx *ctx,
+static void hantro_job_finish_no_pm(struct hantro_ctx *ctx,
enum vb2_buffer_state result)
{
struct vb2_v4l2_buffer *src, *dst;
@@ -86,15 +85,13 @@ static void hantro_job_finish_no_pm(struct hantro_dev *vpu,
result);
}
-static void hantro_job_finish(struct hantro_dev *vpu,
- struct hantro_ctx *ctx,
+static void hantro_job_finish(struct hantro_ctx *ctx,
enum vb2_buffer_state result)
{
- pm_runtime_put_autosuspend(vpu->dev);
-
- clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks);
+ struct hantro_dev *vpu = ctx->dev;
- hantro_job_finish_no_pm(vpu, ctx, result);
+ pm_runtime_put_autosuspend(vpu->dev);
+ hantro_job_finish_no_pm(ctx, result);
}
void hantro_irq_done(struct hantro_dev *vpu,
@@ -111,7 +108,7 @@ void hantro_irq_done(struct hantro_dev *vpu,
if (cancel_delayed_work(&vpu->watchdog_work)) {
if (result == VB2_BUF_STATE_DONE && ctx->codec_ops->done)
ctx->codec_ops->done(ctx);
- hantro_job_finish(vpu, ctx, result);
+ hantro_job_finish(ctx, result);
}
}
@@ -127,7 +124,7 @@ void hantro_watchdog(struct work_struct *work)
vpu_err("frame processing timed out!\n");
if (ctx->codec_ops->reset)
ctx->codec_ops->reset(ctx);
- hantro_job_finish(vpu, ctx, VB2_BUF_STATE_ERROR);
+ hantro_job_finish(ctx, VB2_BUF_STATE_ERROR);
}
}
@@ -170,29 +167,24 @@ void hantro_end_prepare_run(struct hantro_ctx *ctx)
static void device_run(void *priv)
{
struct hantro_ctx *ctx = priv;
+ struct hantro_dev *vpu = ctx->dev;
struct vb2_v4l2_buffer *src, *dst;
int ret;
src = hantro_get_src_buf(ctx);
dst = hantro_get_dst_buf(ctx);
- ret = pm_runtime_resume_and_get(ctx->dev->dev);
- if (ret < 0)
- goto err_cancel_job;
-
- ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks);
- if (ret)
- goto err_cancel_job;
+ ret = pm_runtime_resume_and_get(vpu->dev);
+ if (ret < 0) {
+ hantro_job_finish_no_pm(ctx, VB2_BUF_STATE_ERROR);
+ return;
+ }
v4l2_m2m_buf_copy_metadata(src, dst);
- if (ctx->codec_ops->run(ctx))
- goto err_cancel_job;
-
- return;
-
-err_cancel_job:
- hantro_job_finish_no_pm(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
+ ret = ctx->codec_ops->run(ctx);
+ if (ret)
+ hantro_job_finish(ctx, VB2_BUF_STATE_ERROR);
}
static const struct v4l2_m2m_ops vpu_m2m_ops = {
@@ -1292,22 +1284,40 @@ static void hantro_remove(struct platform_device *pdev)
pm_runtime_disable(vpu->dev);
}
-#ifdef CONFIG_PM
static int hantro_runtime_resume(struct device *dev)
{
struct hantro_dev *vpu = dev_get_drvdata(dev);
+ int ret;
- if (vpu->variant->runtime_resume)
- return vpu->variant->runtime_resume(vpu);
+ ret = clk_bulk_enable(vpu->variant->num_clocks, vpu->clocks);
+ if (ret)
+ return ret;
+
+ if (vpu->variant->runtime_resume) {
+ ret = vpu->variant->runtime_resume(vpu);
+ if (ret)
+ goto err_disable_clocks;
+ }
return 0;
+
+err_disable_clocks:
+ clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks);
+ return ret;
+}
+
+static int hantro_runtime_suspend(struct device *dev)
+{
+ struct hantro_dev *vpu = dev_get_drvdata(dev);
+
+ clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks);
+ return 0;
}
-#endif
static const struct dev_pm_ops hantro_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
- SET_RUNTIME_PM_OPS(NULL, hantro_runtime_resume, NULL)
+ SET_RUNTIME_PM_OPS(hantro_runtime_suspend, hantro_runtime_resume, NULL)
};
static struct platform_driver hantro_driver = {
--
2.47.3
next prev parent reply other threads:[~2026-07-26 2:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-24 11:15 [PATCH] media: hantro: release runtime resources when device_run fails Tharit Tangkijwanichakul
2026-07-24 11:38 ` Philipp Zabel
2026-07-24 12:44 ` Tharit Tangkijwanichakul
2026-07-24 13:12 ` [PATCH v2] " Tharit Tangkijwanichakul
2026-07-26 2:42 ` Tharit Tangkijwanichakul [this message]
2026-07-24 16:12 ` [PATCH] " Frank Li
2026-07-25 8:00 ` Tharit Tangkijwanichakul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260726024243.730-1-tharitt97@gmail.com \
--to=tharitt97@gmail.com \
--cc=Frank.li@oss.nxp.com \
--cc=benjamin.gaignard@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=hverkuil@kernel.org \
--cc=jkoolstra@xs4all.nl \
--cc=linux-kernel-mentees@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=me@brighamcampbell.com \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox