From: Junjie Cao <junjie.cao@linux.dev>
To: neil.armstrong@linaro.org, jesszhan0024@gmail.com,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, airlied@gmail.com, simona@ffwll.ch,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: dmitry.baryshkov@oss.qualcomm.com,
konrad.dybcio@oss.qualcomm.com, mitltlatltl@gmail.com,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/2] drm/panel: Add support for Novatek NT36532 panel
Date: Tue, 4 Aug 2026 00:34:17 -0700 [thread overview]
Message-ID: <20260804073419.84727-1-junjie.cao@linux.dev> (raw)
This series adds support for panels using the Novatek NT36532 Display
Driver IC, a dual-DSI, dual-DSC controller that requires DPU support
for MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT.
The first user is the CSOT PPC100HB1-1 panel found in the OnePlus Pad 2
(OnePlus Pad Pro in China) tablet: 3000x2120, dual-DSI in bonded mode,
DSC 1.2 with two slices per line.
v2 has been tested on the OnePlus Pad 2: the panel comes up in its
native 3000x2120 mode at 120Hz over dual-DSI in bonded mode with DSC,
and displays a stable image. The only wire-level change in v3 is the
page 0x23 0x51 write going from two bytes to one, matching the stock
firmware DT.
Changes in v3:
- Kconfig: select DRM_DISPLAY_DSC_HELPER, DRM_DISPLAY_HELPER and
DRM_KMS_HELPER, depend on BACKLIGHT_CLASS_DEVICE.
- Write the page 0x23 dimming table entry 0x51 as a plain one-byte
write instead of the two-byte DCS brightness helper.
- Spell the page 0x10 brightness write as MIPI_DCS_SET_DISPLAY_BRIGHTNESS
with an explicit 07 ff payload instead of the byte-swapped 0xff07.
- Drop accidental MIPI_DCS_* macro names from vendor-page register
writes.
- Make the DSC config const and copy it into the panel instance at
probe time.
- Support an external backlight via drm_panel_of_backlight().
- Report the panel physical size via the display mode.
- Link to v2: https://lore.kernel.org/all/20260729160804.912826-1-junjie.cao@linux.dev
- Link to v1: https://lore.kernel.org/all/20251001135914.13754-1-caojunjie650@gmail.com
Junjie Cao (2):
dt-bindings: display: panel: Add Novatek NT36532
drm/panel: Add Novatek NT36532 panel driver
.../display/panel/novatek,nt36532.yaml | 83 ++++
MAINTAINERS | 7 +
drivers/gpu/drm/panel/Kconfig | 14 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36532.c | 431 ++++++++++++++++++
5 files changed, 536 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36532.yaml
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36532.c
base-commit: 0d33d21e47d9dc66f91e44da3fc9220c74d93df7
--
2.43.0
next reply other threads:[~2026-08-04 7:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 7:34 Junjie Cao [this message]
2026-08-04 7:39 ` [PATCH v3 1/2] dt-bindings: display: panel: Add Novatek NT36532 Junjie Cao
2026-08-04 7:42 ` [PATCH v3 2/2] drm/panel: Add Novatek NT36532 panel driver Junjie Cao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804073419.84727-1-junjie.cao@linux.dev \
--to=junjie.cao@linux.dev \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mitltlatltl@gmail.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox