Re: [PATCH net] net: dsa: b53: be VLAN unaware when not filtering

[Vladimir Oltean <olteanv@gmail.com>]

On Wed, Aug 05, 2026 at 09:44:51AM +0200, Jonas Gorski wrote:
> While SVL is active, any ARL add/remove operations ignore the VID
> field/register and force it to 0, making existing static ARL entries
> with VID != 0 inaccessible, and any (static) ARL entries added will
> have their VID set to 0, regardless what the software entry said.

Is this a hardware limitation, or is it because global state
(dev->vlan_enabled) blinds b53_arl_rw_op()'s attempts to look at FDB
entries of the other type?

static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
{
	u8 reg;

	if (op > ARLTBL_RW)
		return -EINVAL;

	b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
	reg |= ARLTBL_START_DONE;
	if (op)
		reg |= ARLTBL_RW;
	else
		reg &= ~ARLTBL_RW;
	if (dev->vlan_enabled)
		reg &= ~ARLTBL_IVL_SVL_SELECT;
	else
		reg |= ARLTBL_IVL_SVL_SELECT;
	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);

	return b53_arl_op_wait(dev);
}