From: Aditya Garg <gargaditya@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, longli@microsoft.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, kotaranov@microsoft.com, horms@kernel.org,
ernis@linux.microsoft.com, dipayanroy@linux.microsoft.com,
shradhagupta@linux.microsoft.com, kees@kernel.org,
sgeorgejohn@microsoft.com, ssengar@linux.microsoft.com,
gargaditya@linux.microsoft.com, gargaditya@microsoft.com,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rdma@vger.kernel.org
Subject: [PATCH net-next 1/2] net: mana: Route ring-buffer access through offset-based helpers
Date: Fri, 7 Aug 2026 13:56:35 -0700 [thread overview]
Message-ID: <20260807210002.1695263-2-gargaditya@linux.microsoft.com> (raw)
In-Reply-To: <20260807210002.1695263-1-gargaditya@linux.microsoft.com>
In preparation for backing GDMA queue memory with a vector of
non-contiguous order-0 coherent pages, route CPU access to a queue's
ring buffer through two new helpers: mana_gd_ring_ptr() returns the CPU
address of a byte offset into the ring, and mana_gd_ring_contig_avail()
the number of bytes left before the ring wraps, so a WQ write that runs
past the end of the ring can be split at that point.
Convert the EQ, CQ and work-request paths to use them.
mana_gd_write_sgl() now takes a byte offset rather than a raw pointer,
so mana_gd_post_work_request() derives the SGL position arithmetically.
While queue memory is contiguous both helpers are simple arithmetic on
the ring base and size, so there is no functional change.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
---
.../net/ethernet/microsoft/mana/gdma_main.c | 63 ++++++++++++-------
1 file changed, 39 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/microsoft/mana/gdma_main.c b/drivers/net/ethernet/microsoft/mana/gdma_main.c
index a38d4bb74621..31a79693db07 100644
--- a/drivers/net/ethernet/microsoft/mana/gdma_main.c
+++ b/drivers/net/ethernet/microsoft/mana/gdma_main.c
@@ -753,11 +753,24 @@ int mana_schedule_serv_work(struct gdma_context *gc, enum gdma_eqe_type type)
return 0;
}
+/* Return the CPU address of byte @offset within a queue's ring buffer. */
+static void *mana_gd_ring_ptr(const struct gdma_queue *q, u32 offset)
+{
+ return q->queue_mem_ptr + offset;
+}
+
+/* Number of bytes from @offset to the end of the ring buffer, i.e. the point
+ * at which ring access wraps back to the start.
+ */
+static u32 mana_gd_ring_contig_avail(const struct gdma_queue *q, u32 offset)
+{
+ return q->queue_size - offset;
+}
+
static void mana_gd_process_eqe(struct gdma_queue *eq)
{
u32 head = eq->head % (eq->queue_size / GDMA_EQE_SIZE);
struct gdma_context *gc = eq->gdma_dev->gdma_context;
- struct gdma_eqe *eq_eqe_ptr = eq->queue_mem_ptr;
union gdma_eqe_info eqe_info;
enum gdma_eqe_type type;
struct gdma_event event;
@@ -765,7 +778,7 @@ static void mana_gd_process_eqe(struct gdma_queue *eq)
struct gdma_eqe *eqe;
u32 cq_id;
- eqe = &eq_eqe_ptr[head];
+ eqe = mana_gd_ring_ptr(eq, head * sizeof(*eqe));
eqe_info.as_uint32 = eqe->eqe_info;
type = eqe_info.type;
@@ -829,7 +842,6 @@ static void mana_gd_process_eq_events(void *arg)
{
u32 owner_bits, new_bits, old_bits;
union gdma_eqe_info eqe_info;
- struct gdma_eqe *eq_eqe_ptr;
struct gdma_queue *eq = arg;
struct gdma_context *gc;
struct gdma_eqe *eqe;
@@ -839,11 +851,10 @@ static void mana_gd_process_eq_events(void *arg)
gc = eq->gdma_dev->gdma_context;
num_eqe = eq->queue_size / GDMA_EQE_SIZE;
- eq_eqe_ptr = eq->queue_mem_ptr;
/* Process up to 5 EQEs at a time, and update the HW head. */
for (i = 0; i < 5; i++) {
- eqe = &eq_eqe_ptr[eq->head % num_eqe];
+ eqe = mana_gd_ring_ptr(eq, (eq->head % num_eqe) * sizeof(*eqe));
eqe_info.as_uint32 = eqe->eqe_info;
owner_bits = eqe_info.owner_bits;
@@ -1508,7 +1519,7 @@ u8 *mana_gd_get_wqe_ptr(const struct gdma_queue *wq, u32 wqe_offset)
WARN_ON_ONCE((offset + GDMA_WQE_BU_SIZE) > wq->queue_size);
- return wq->queue_mem_ptr + offset;
+ return mana_gd_ring_ptr(wq, offset);
}
static u32 mana_gd_write_client_oob(const struct gdma_wqe_request *wqe_req,
@@ -1554,27 +1565,24 @@ static u32 mana_gd_write_client_oob(const struct gdma_wqe_request *wqe_req,
return sizeof(header) + client_oob_size;
}
-static void mana_gd_write_sgl(struct gdma_queue *wq, u8 *wqe_ptr,
+static void mana_gd_write_sgl(struct gdma_queue *wq, u32 sgl_offset,
const struct gdma_wqe_request *wqe_req)
{
+ u32 size_to_end = mana_gd_ring_contig_avail(wq, sgl_offset);
u32 sgl_size = sizeof(struct gdma_sge) * wqe_req->num_sge;
const u8 *address = (u8 *)wqe_req->sgl;
- u8 *base_ptr, *end_ptr;
- u32 size_to_end;
-
- base_ptr = wq->queue_mem_ptr;
- end_ptr = base_ptr + wq->queue_size;
- size_to_end = (u32)(end_ptr - wqe_ptr);
if (size_to_end < sgl_size) {
- memcpy(wqe_ptr, address, size_to_end);
+ memcpy(mana_gd_ring_ptr(wq, sgl_offset), address, size_to_end);
- wqe_ptr = base_ptr;
address += size_to_end;
sgl_size -= size_to_end;
+ sgl_offset += size_to_end;
+ if (sgl_offset == wq->queue_size)
+ sgl_offset = 0;
}
- memcpy(wqe_ptr, address, sgl_size);
+ memcpy(mana_gd_ring_ptr(wq, sgl_offset), address, sgl_size);
}
int mana_gd_post_work_request(struct gdma_queue *wq,
@@ -1584,8 +1592,12 @@ int mana_gd_post_work_request(struct gdma_queue *wq,
u32 client_oob_size = wqe_req->inline_oob_size;
u32 sgl_data_size;
u32 max_wqe_size;
+ u32 wqe_offset;
+ u32 sgl_offset;
u32 wqe_size;
+ u32 oob_len;
u8 *wqe_ptr;
+ u32 head;
if (wqe_req->num_sge == 0)
return -EINVAL;
@@ -1617,13 +1629,17 @@ int mana_gd_post_work_request(struct gdma_queue *wq,
if (wqe_info)
wqe_info->wqe_size_in_bu = wqe_size / GDMA_WQE_BU_SIZE;
- wqe_ptr = mana_gd_get_wqe_ptr(wq, wq->head);
- wqe_ptr += mana_gd_write_client_oob(wqe_req, wq->type, client_oob_size,
- sgl_data_size, wqe_ptr);
- if (wqe_ptr >= (u8 *)wq->queue_mem_ptr + wq->queue_size)
- wqe_ptr -= wq->queue_size;
+ head = wq->head;
+ wqe_offset = (head * GDMA_WQE_BU_SIZE) & (wq->queue_size - 1);
+ wqe_ptr = mana_gd_get_wqe_ptr(wq, head);
+ oob_len = mana_gd_write_client_oob(wqe_req, wq->type, client_oob_size,
+ sgl_data_size, wqe_ptr);
+
+ sgl_offset = wqe_offset + oob_len;
+ if (sgl_offset >= wq->queue_size)
+ sgl_offset -= wq->queue_size;
- mana_gd_write_sgl(wq, wqe_ptr, wqe_req);
+ mana_gd_write_sgl(wq, sgl_offset, wqe_req);
wq->head += wqe_size / GDMA_WQE_BU_SIZE;
@@ -1653,11 +1669,10 @@ int mana_gd_post_and_ring(struct gdma_queue *queue,
static int mana_gd_read_cqe(struct gdma_queue *cq, struct gdma_comp *comp)
{
unsigned int num_cqe = cq->queue_size / sizeof(struct gdma_cqe);
- struct gdma_cqe *cq_cqe = cq->queue_mem_ptr;
u32 owner_bits, new_bits, old_bits;
struct gdma_cqe *cqe;
- cqe = &cq_cqe[cq->head % num_cqe];
+ cqe = mana_gd_ring_ptr(cq, (cq->head % num_cqe) * sizeof(*cqe));
owner_bits = cqe->cqe_info.owner_bits;
old_bits = (cq->head / num_cqe - 1) & GDMA_CQE_OWNER_MASK;
--
2.43.0
next prev parent reply other threads:[~2026-08-07 21:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-07 20:56 [PATCH net-next 0/2] net: mana: Avoid DMA queue allocation failure under memory fragmentation Aditya Garg
2026-08-07 20:56 ` Aditya Garg [this message]
2026-08-07 20:56 ` [PATCH net-next 2/2] net: mana: Fall back to scattered pages for GDMA queues Aditya Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807210002.1695263-2-gargaditya@linux.microsoft.com \
--to=gargaditya@linux.microsoft.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=decui@microsoft.com \
--cc=dipayanroy@linux.microsoft.com \
--cc=edumazet@google.com \
--cc=ernis@linux.microsoft.com \
--cc=gargaditya@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=horms@kernel.org \
--cc=kees@kernel.org \
--cc=kotaranov@microsoft.com \
--cc=kuba@kernel.org \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sgeorgejohn@microsoft.com \
--cc=shradhagupta@linux.microsoft.com \
--cc=ssengar@linux.microsoft.com \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox