[PATCH net v2] net: phylink: treat PSGMII as an inband capable interface

[Sandeep Sondagar <sandeepsondagar@gmail.com>]

PSGMII (the Qualcomm 5-port SGMII) conveys the link negotiation result
from the PHY back to the MAC through per-channel in-band SGMII words,
exactly like SGMII and QSGMII.

However, PHY_INTERFACE_MODE_PSGMII is missing from
phylink_get_inband_type(), so phylink reports INBAND_NONE for it and
phylink_pcs_neg_mode() falls back to PHYLINK_PCS_NEG_NONE. The PCS is
then programmed in force mode and its control-register speed bits (which
default to 1000base) are used, so a slower copper link - e.g. 100base-T
- is reported as 1Gbps and cannot pass traffic.

Classify PSGMII alongside SGMII and QSGMII as INBAND_CISCO_SGMII so the
PCS negotiates in-band and the resolved link speed comes from the PHY
in-band word.

Fixes: 83b5f0253b1e ("net: phy: Introduce PSGMII PHY interface mode")
Signed-off-by: Sandeep Sondagar <sandeepsondagar@gmail.com>
---
 drivers/net/phy/phylink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 18d2ead97aa5..983a1a3cee37 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1040,6 +1040,7 @@ static enum inband_type phylink_get_inband_type(phy_interface_t interface)
 {
 	switch (interface) {
 	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_PSGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 	case PHY_INTERFACE_MODE_QUSGMII:
 	case PHY_INTERFACE_MODE_USXGMII:
-- 
2.43.0