[PATCH] media: redrat3: fix UAF in probe error path leaving rc device registered

[Rik van Riel <riel@surriel.com>]

redrat3 stores its device name and phys path inside the main rr3
structure, and the rc device's device_name and input_phys point into
rr3. When the RC device is registered, it keeps those pointers.

  KASAN: slab-use-after-free in string_nocheck lib/vsprintf.c:648
  Read of size 1 at addr ffff888051fda758 by task udevd/7464
  Call Trace:
   string_nocheck lib/vsprintf.c:648 [inline]
   string+0x216/0x2d0 lib/vsprintf.c:730
   vsnprintf+0x74a/0xef0 lib/vsprintf.c:2945
   vscnprintf+0x41/0x90 lib/vsprintf.c:3014
   sysfs_emit+0x10e/0x180 fs/sysfs/file.c:761
   input_dev_show_name+0x58/0x70 drivers/input/input.c:1282

  Allocated by task 10:
   redrat3_dev_probe+0x477/0x2570 drivers/media/rc/redrat3.c:1023
  Freed by task 10:
   redrat3_delete drivers/media/rc/redrat3.c:466 [inline]
   redrat3_dev_probe+0x1bf4/0x2570 drivers/media/rc/redrat3.c:1124

Syzkaller triggers this via usb probing. It probes the RedRat3 USB
interface, which calls redrat3_dev_probe() in redrat3.c. That function
allocates rr3, then builds an rc device whose name points into rr3 via
redrat3_init_rc_dev() in redrat3.c, and registers it with
rc_register_device().

When the detector enable fails after the RC device is registered, the
probe jumps to the led_free path. That path unregisters the LED but
does not unregister the RC device before freeing rr3 via
redrat3_delete() in redrat3.c. The RC device still holds
device_name = rr3->name which is now freed.

Later udevd reads /sys/.../input device name via sysfs_emit() in
file.c, which calls input_dev_show_name() in input.c, which emits
dev->name which is the freed rr3->name.

Fix the error path to unregister and free the RC device before freeing
rr3, matching the order already used in redrat3_dev_disconnect() in
redrat3.c.

This change should be safe because the RC device is fully registered
at this point and its teardown via rc_unregister_device() is protected
by the input device mutex, and rr3 is still alive during unregister so
device_name remains valid until after unregister. No new lock ordering
is introduced.

Reported-by: syzbot+302b9b575a06733ff60c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=302b9b575a06733ff60c
Link: https://lore.kernel.org/all/6a74a76d.ec7c9571.3ac9bb.0056.GAE@google.com/
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
---
 drivers/media/rc/redrat3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 3f828a564e19..ae1e01097639 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -1120,6 +1120,8 @@ static int redrat3_dev_probe(struct usb_interface *intf,
 
 led_free:
 	led_classdev_unregister(&rr3->led);
+	rc_unregister_device(rr3->rc);
+	rc_free_device(rr3->rc);
 redrat_free:
 	redrat3_delete(rr3, rr3->udev);
 
-- 
2.55.0