[PATCH] thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file

[Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>]

From: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>

Add missing file resulting from a manual application of the change
below after fixing a conflict in the Makefile.

Fixes: 948ee3a74f35 ("add support for PMIC5 Gen3 ADC thermal monitoring")
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
---
 drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c | 434 ++++++++++++++++++
 1 file changed, 434 insertions(+)
 create mode 100644 drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c

diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c
new file mode 100644
index 000000000000..9cf552d36868
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/container_of.h>
+#include <linux/device/devres.h>
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/iio/adc/qcom-adc5-gen3-common.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+#include <linux/unaligned.h>
+
+#include "../thermal_hwmon.h"
+
+#define ADC_TM5_GEN3_CONFIG_REGS 12
+
+struct device;
+struct adc_tm5_gen3_chip;
+
+/**
+ * struct adc_tm5_gen3_channel_props - ADC_TM channel structure
+ * @common_props: structure with common ADC channel properties.
+ * @chip: ADC TM device.
+ * @tzd: pointer to thermal device corresponding to TM channel.
+ * @sdam_index: SDAM on which this TM channel lies.
+ * @timer: time period of recurring TM measurement.
+ * @tm_chan_index: TM channel number used.
+ * @high_thr_en: TM high threshold crossing detection enabled.
+ * @low_thr_en: TM low threshold crossing detection enabled.
+ */
+struct adc_tm5_gen3_channel_props {
+	struct adc5_channel_common_prop common_props;
+	struct adc_tm5_gen3_chip *chip;
+	struct thermal_zone_device *tzd;
+	unsigned int sdam_index;
+	unsigned int timer;
+	unsigned int tm_chan_index;
+	bool high_thr_en;
+	bool low_thr_en;
+};
+
+/**
+ * struct adc_tm5_gen3_chip - ADC Thermal Monitoring device structure
+ * @dev_data: Top-level ADC device data.
+ * @chan_props: Array of ADC_TM channel structures.
+ * @dev: SPMI ADC5 Gen3 device.
+ * @nchannels: number of TM channels allocated
+ */
+struct adc_tm5_gen3_chip {
+	struct adc5_device_data *dev_data;
+	struct adc_tm5_gen3_channel_props *chan_props;
+	struct device *dev;
+	unsigned int nchannels;
+};
+
+DEFINE_GUARD(adc5_gen3, struct adc_tm5_gen3_chip *,
+	     adc5_gen3_mutex_lock(_T->dev), adc5_gen3_mutex_unlock(_T->dev))
+
+static int get_sdam_from_irq(struct adc_tm5_gen3_chip *adc_tm5, int irq)
+{
+	for (int i = 0; i < adc_tm5->dev_data->num_sdams; i++) {
+		if (adc_tm5->dev_data->base[i].irq == irq)
+			return i;
+	}
+	return -ENOENT;
+}
+
+static irqreturn_t adctm5_gen3_isr(int irq, void *dev_id)
+{
+	struct adc_tm5_gen3_chip *adc_tm5 = dev_id;
+	int ret, sdam_num;
+	u8 tm_status[2];
+	u8 status, val;
+
+	sdam_num = get_sdam_from_irq(adc_tm5, irq);
+	if (sdam_num < 0)
+		return IRQ_NONE;
+
+	ret = adc5_gen3_read(adc_tm5->dev_data, sdam_num, ADC5_GEN3_STATUS1,
+			     &status, sizeof(status));
+	if (ret)
+		return IRQ_NONE;
+
+	if (status & ADC5_GEN3_STATUS1_CONV_FAULT) {
+		val = ADC5_GEN3_CONV_ERR_CLR_REQ;
+		adc5_gen3_status_clear(adc_tm5->dev_data, sdam_num,
+				       ADC5_GEN3_CONV_ERR_CLR, &val, 1);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc5_gen3_read(adc_tm5->dev_data, sdam_num, ADC5_GEN3_TM_HIGH_STS,
+			     tm_status, sizeof(tm_status));
+	if (ret)
+		return IRQ_NONE;
+
+	if (tm_status[0] || tm_status[1])
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t adctm5_gen3_isr_thread(int irq, void *dev_id)
+{
+	struct adc_tm5_gen3_chip *adc_tm5 = dev_id;
+	u8 tm_status[2];
+	int sdam_index;
+
+	sdam_index = get_sdam_from_irq(adc_tm5, irq);
+	if (sdam_index < 0)
+		return IRQ_NONE;
+
+	scoped_guard(adc5_gen3, adc_tm5) {
+		int ret;
+
+		ret = adc5_gen3_read(adc_tm5->dev_data, sdam_index, ADC5_GEN3_TM_HIGH_STS,
+				     tm_status, sizeof(tm_status));
+		if (ret)
+			return IRQ_NONE;
+
+		ret = adc5_gen3_status_clear(adc_tm5->dev_data, sdam_index,
+					     ADC5_GEN3_TM_HIGH_STS_CLR, tm_status,
+					     sizeof(tm_status));
+		if (ret)
+			return IRQ_NONE;
+	}
+
+	for (int i = 0; i < adc_tm5->nchannels; i++) {
+		struct adc_tm5_gen3_channel_props *chan_prop = &adc_tm5->chan_props[i];
+		int offset = chan_prop->tm_chan_index;
+		bool upper_set, lower_set;
+
+		if (chan_prop->sdam_index != sdam_index)
+			continue;
+
+		upper_set = ((tm_status[0] & BIT(offset)) && chan_prop->high_thr_en);
+		lower_set = ((tm_status[1] & BIT(offset)) && chan_prop->low_thr_en);
+
+		if (!(upper_set || lower_set))
+			continue;
+
+		thermal_zone_device_update(chan_prop->tzd, THERMAL_TRIP_VIOLATED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int adc_tm5_gen3_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct adc_tm5_gen3_channel_props *prop = thermal_zone_device_priv(tz);
+	struct adc_tm5_gen3_chip *adc_tm5;
+
+	if (!prop || !prop->chip)
+		return -EINVAL;
+
+	adc_tm5 = prop->chip;
+
+	return adc5_gen3_get_scaled_reading(adc_tm5->dev, &prop->common_props, temp);
+}
+
+static int adc_tm5_gen3_disable_channel(struct adc_tm5_gen3_channel_props *prop)
+{
+	struct adc_tm5_gen3_chip *adc_tm5 = prop->chip;
+	int ret;
+	u8 val;
+
+	prop->high_thr_en = false;
+	prop->low_thr_en = false;
+
+	ret = adc5_gen3_poll_wait_hs(adc_tm5->dev_data, prop->sdam_index);
+	if (ret)
+		return ret;
+
+	val = BIT(prop->tm_chan_index);
+	ret = adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index,
+			      ADC5_GEN3_TM_HIGH_STS_CLR, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	ret = adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index,
+			      ADC5_GEN3_TM_LOW_STS_CLR, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	val = MEAS_INT_DISABLE;
+	ret = adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index,
+			      ADC5_GEN3_TIMER_SEL, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	/* To indicate there is an actual conversion request */
+	val = ADC5_GEN3_CHAN_CONV_REQ | prop->tm_chan_index;
+	ret = adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index,
+			      ADC5_GEN3_PERPH_CH, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	val = ADC5_GEN3_CONV_REQ_REQ;
+	return adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index,
+			       ADC5_GEN3_CONV_REQ, &val, sizeof(val));
+}
+
+static int adc_tm5_gen3_configure(struct adc_tm5_gen3_channel_props *prop,
+				  int low_temp, int high_temp)
+{
+	struct adc_tm5_gen3_chip *adc_tm5 = prop->chip;
+	u8 buf[ADC_TM5_GEN3_CONFIG_REGS];
+	u8 conv_req;
+	u16 adc_code;
+	int ret;
+
+	ret = adc5_gen3_poll_wait_hs(adc_tm5->dev_data, prop->sdam_index);
+	if (ret < 0)
+		return ret;
+
+	ret = adc5_gen3_read(adc_tm5->dev_data, prop->sdam_index,
+			     ADC5_GEN3_SID, buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	/* Write SID */
+	buf[0] = FIELD_PREP(ADC5_GEN3_SID_MASK, prop->common_props.sid);
+
+	/* Select TM channel and indicate there is an actual conversion request */
+	buf[1] = ADC5_GEN3_CHAN_CONV_REQ | prop->tm_chan_index;
+
+	buf[2] = prop->timer;
+
+	/* Digital param selection */
+	adc5_gen3_update_dig_param(&prop->common_props, &buf[3]);
+
+	/* Update fast average sample value */
+	buf[4] = FIELD_PREP(ADC5_GEN3_FAST_AVG_CTL_SAMPLES_MASK,
+			    prop->common_props.avg_samples) | ADC5_GEN3_FAST_AVG_CTL_EN;
+
+	/* Select ADC channel */
+	buf[5] = prop->common_props.channel;
+
+	/* Select HW settle delay for channel */
+	buf[6] = FIELD_PREP(ADC5_GEN3_HW_SETTLE_DELAY_MASK,
+			    prop->common_props.hw_settle_time_us);
+
+	buf[7] = 0;
+
+	/* High temperature corresponds to low voltage threshold */
+	prop->low_thr_en = (high_temp != INT_MAX);
+	if (prop->low_thr_en) {
+		adc_code = qcom_adc_tm5_gen2_temp_res_scale(high_temp);
+		put_unaligned_le16(adc_code, &buf[8]);
+		buf[7] |= ADC5_GEN3_LOW_THR_INT_EN;
+	}
+
+	/* Low temperature corresponds to high voltage threshold */
+	prop->high_thr_en = (low_temp != -INT_MAX);
+	if (prop->high_thr_en) {
+		adc_code = qcom_adc_tm5_gen2_temp_res_scale(low_temp);
+		put_unaligned_le16(adc_code, &buf[10]);
+		buf[7] |= ADC5_GEN3_HIGH_THR_INT_EN;
+	}
+
+	ret = adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, ADC5_GEN3_SID,
+			      buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	conv_req = ADC5_GEN3_CONV_REQ_REQ;
+	return adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index,
+			       ADC5_GEN3_CONV_REQ, &conv_req, sizeof(conv_req));
+}
+
+static int adc_tm5_gen3_set_trip_temp(struct thermal_zone_device *tz,
+				      int low_temp, int high_temp)
+{
+	struct adc_tm5_gen3_channel_props *prop = thermal_zone_device_priv(tz);
+	struct adc_tm5_gen3_chip *adc_tm5;
+
+	if (!prop || !prop->chip)
+		return -EINVAL;
+
+	adc_tm5 = prop->chip;
+
+	dev_dbg(adc_tm5->dev, "channel:%s, low_temp(mdegC):%d, high_temp(mdegC):%d\n",
+		prop->common_props.label, low_temp, high_temp);
+
+	guard(adc5_gen3)(adc_tm5);
+
+	return adc_tm5_gen3_configure(prop, low_temp, high_temp);
+}
+
+static const struct thermal_zone_device_ops adc_tm_ops = {
+	.get_temp = adc_tm5_gen3_get_temp,
+	.set_trips = adc_tm5_gen3_set_trip_temp,
+};
+
+static int adc_tm5_register_tzd(struct adc_tm5_gen3_chip *adc_tm5)
+{
+	struct thermal_zone_device *tzd;
+	unsigned int channel;
+	int ret;
+
+	for (int i = 0; i < adc_tm5->nchannels; i++) {
+		channel = ADC5_GEN3_V_CHAN(adc_tm5->chan_props[i].common_props);
+		tzd = devm_thermal_of_zone_register(adc_tm5->dev, channel,
+						    &adc_tm5->chan_props[i],
+						    &adc_tm_ops);
+		if (IS_ERR(tzd)) {
+			if (PTR_ERR(tzd) == -ENODEV) {
+				dev_dbg(adc_tm5->dev,
+					"thermal sensor on channel %d is not used\n",
+					channel);
+				continue;
+			}
+			return PTR_ERR(tzd);
+		}
+		adc_tm5->chan_props[i].tzd = tzd;
+		ret = devm_thermal_add_hwmon_sysfs(adc_tm5->dev, tzd);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void adc5_gen3_disable(void *data)
+{
+	struct adc_tm5_gen3_chip *adc_tm5 = data;
+
+	guard(adc5_gen3)(adc_tm5);
+
+	/* Disable all available TM channels */
+	for (int i = 0; i < adc_tm5->nchannels; i++)
+		adc_tm5_gen3_disable_channel(&adc_tm5->chan_props[i]);
+}
+
+static int adc_tm5_probe(struct auxiliary_device *aux_dev,
+			 const struct auxiliary_device_id *id)
+{
+	struct adc_tm5_gen3_chip *adc_tm5;
+	struct tm5_aux_dev_wrapper *aux_dev_wrapper;
+	struct device *dev = &aux_dev->dev;
+	int ret;
+
+	adc_tm5 = devm_kzalloc(dev, sizeof(*adc_tm5), GFP_KERNEL);
+	if (!adc_tm5)
+		return -ENOMEM;
+
+	aux_dev_wrapper = container_of(aux_dev, struct tm5_aux_dev_wrapper, aux_dev);
+
+	adc_tm5->dev = dev;
+	adc_tm5->dev_data = aux_dev_wrapper->dev_data;
+	adc_tm5->nchannels = aux_dev_wrapper->n_tm_channels;
+	adc_tm5->chan_props = devm_kcalloc(dev, aux_dev_wrapper->n_tm_channels,
+					   sizeof(*adc_tm5->chan_props), GFP_KERNEL);
+	if (!adc_tm5->chan_props)
+		return -ENOMEM;
+
+	for (int i = 0; i < adc_tm5->nchannels; i++) {
+		/*
+		 * Since the first channel of the first SDAM is reserved for
+		 * immediate ADC conversions, TM channel count must start from
+		 * the channel just after it. The variable tm_count is used to
+		 * calculate SDAM and TM channel index on that SDAM correctly
+		 * for each TM channel.
+		 */
+		int tm_count = i + 1;
+
+		adc_tm5->chan_props[i].common_props = aux_dev_wrapper->tm_props[i];
+		adc_tm5->chan_props[i].timer = MEAS_INT_1S;
+		adc_tm5->chan_props[i].sdam_index = tm_count / 8;
+		adc_tm5->chan_props[i].tm_chan_index = tm_count % 8;
+		adc_tm5->chan_props[i].chip = adc_tm5;
+	}
+
+	/*
+	 * ADC_TM channels are enabled in the loop in adc_tm5_register_tzd() as
+	 * part of the set_trips calls during thermal zone registration. This
+	 * action is to disable them all in case of probe failure.
+	 */
+	ret = devm_add_action(dev, adc5_gen3_disable, adc_tm5);
+	if (ret)
+		return ret;
+
+	ret = adc_tm5_register_tzd(adc_tm5);
+	if (ret)
+		return ret;
+
+	for (int i = 0; i < adc_tm5->dev_data->num_sdams; i++) {
+		u32 irq_flags = IRQF_ONESHOT;
+
+		/*
+		 * First SDAM's interrupt is shared between main ADC driver and
+		 * auxiliary TM driver, so its flags must include IRQF_SHARED.
+		 * This is not needed for other SDAMs as they will be used only
+		 * for TM functionality.
+		 */
+		if (i == 0)
+			irq_flags |= IRQF_SHARED;
+
+		ret = devm_request_threaded_irq(dev,
+						adc_tm5->dev_data->base[i].irq,
+						adctm5_gen3_isr,
+						adctm5_gen3_isr_thread,
+						irq_flags,
+						adc_tm5->dev_data->base[i].irq_name,
+						adc_tm5);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct auxiliary_device_id adctm5_auxiliary_id_table[] = {
+	{ .name = "qcom_spmi_adc5_gen3.adc5_tm_gen3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, adctm5_auxiliary_id_table);
+
+static struct auxiliary_driver adctm5gen3_auxiliary_driver = {
+	.id_table = adctm5_auxiliary_id_table,
+	.probe = adc_tm5_probe,
+};
+module_auxiliary_driver(adctm5gen3_auxiliary_driver);
+
+MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("QCOM_SPMI_ADC5_GEN3");
-- 
2.43.0