The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Jack Wang <163wangjack@gmail.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Vinicius Costa Gomes <vinicius.gomes@intel.com>,
	Jamal Hadi Salim <jhs@mojatatu.com>,
	Jiri Pirko <jiri@resnulli.us>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	Elena Salomatkina <esalomatkina@ispras.ru>,
	Jack Wang <163wangjack@gmail.com>
Subject: [PATCH net v2] net/sched: cbs: perform rate conversions in signed 64-bit arithmetic
Date: Wed, 12 Aug 2026 18:00:44 +0800	[thread overview]
Message-ID: <20260812100044.38040-1-163wangjack@gmail.com> (raw)

cbs_set_port_rate() and cbs_change() multiply link rates and slope values
by BYTES_PER_KBIT, an unsigned long constant.  On 32-bit architectures,
the multiplications therefore take place in 32-bit unsigned arithmetic
before the results are assigned to s64 fields.

For port rates above approximately 34.36 Gbit/s this wraps port_rate.
The same conversion turns a negative sendslope into a large positive
value, reversing the CBS credit adjustment.  This affects software CBS;
port_rate is also refreshed on NETDEV_UP and NETDEV_CHANGE notifications.

Cast the first operand of each multiplication to s64 so all intermediate
operations use signed 64-bit arithmetic and preserve the value's sign on
every architecture

Also reject a non-positive idleslope. A negative idleslope can arm the
watchdog in the past and busy-loop.

Fixes: 585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Fixes: 397006ba5d918 ("net/sched: cbs: Fix integer overflow in cbs_set_port_rate()")

Signed-off-by: Jack Wang <163wangjack@gmail.com>
---
v2:
  - Reject a non-positive idleslope to prevent scheduling the watchdog in
    the past.
  - Leave the pre-existing timediff_to_credits() overflow for a separate
    follow-up.

  v1: https://lore.kernel.org/netdev/20260806155253.50252-1-163wangjack@gmail.com/

 net/sched/sch_cbs.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_cbs.c b/net/sched/sch_cbs.c
index 1c93469c56e3..e960c8e01ef4 100644
--- a/net/sched/sch_cbs.c
+++ b/net/sched/sch_cbs.c
@@ -335,7 +335,7 @@ static void cbs_set_port_rate(struct net_device *dev, struct cbs_sched_data *q)
 		speed = ecmd.base.speed;
 
 skip:
-	port_rate = speed * 1000 * BYTES_PER_KBIT;
+	port_rate = (s64)speed * 1000 * BYTES_PER_KBIT;
 
 	atomic64_set(&q->port_rate, port_rate);
 	netdev_dbg(dev, "cbs: set %s's port_rate to: %lld, linkspeed: %d\n",
@@ -392,6 +392,10 @@ static int cbs_change(struct Qdisc *sch, struct nlattr *opt,
 	}
 
 	qopt = nla_data(tb[TCA_CBS_PARMS]);
+	if (qopt->idleslope <= 0) {
+		NL_SET_ERR_MSG(extack, "Idleslope must be greater than zero");
+		return -EINVAL;
+	}
 
 	if (!qopt->offload) {
 		cbs_set_port_rate(dev, q);
@@ -405,8 +409,8 @@ static int cbs_change(struct Qdisc *sch, struct nlattr *opt,
 	/* Everything went OK, save the parameters used. */
 	WRITE_ONCE(q->hicredit, qopt->hicredit);
 	WRITE_ONCE(q->locredit, qopt->locredit);
-	WRITE_ONCE(q->idleslope, qopt->idleslope * BYTES_PER_KBIT);
-	WRITE_ONCE(q->sendslope, qopt->sendslope * BYTES_PER_KBIT);
+	WRITE_ONCE(q->idleslope, (s64)qopt->idleslope * BYTES_PER_KBIT);
+	WRITE_ONCE(q->sendslope, (s64)qopt->sendslope * BYTES_PER_KBIT);
 	WRITE_ONCE(q->offload, qopt->offload);
 
 	return 0;

base-commit: 7b53449540502cb21b32bca62a6258e22cd97bbe
-- 
2.53.0


             reply	other threads:[~2026-08-12 10:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12 10:00 Jack Wang [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-08-06 15:49 [PATCH] net/sched: cbs: perform rate conversions in signed 64-bit arithmetic Jack Wang
2026-08-12  8:02 ` [PATCH net v2] " Jack Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260812100044.38040-1-163wangjack@gmail.com \
    --to=163wangjack@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=esalomatkina@ispras.ru \
    --cc=horms@kernel.org \
    --cc=jhs@mojatatu.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vinicius.gomes@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox