From: Joshua Crofts <joshua.crofts1@gmail.com>
To: Salah Triki <salah.triki@gmail.com>
Cc: "Puranjay Mohan" <puranjay@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] iio: temperature: tmp117: fix calibbias cache update on I2C write failure
Date: Sat, 22 Aug 2026 10:16:18 +0200 [thread overview]
Message-ID: <20260822101618.2690a7e9@systembl0wer> (raw)
In-Reply-To: <20260822004929.13643-1-salah.triki@gmail.com>
On Sat, 22 Aug 2026 01:49:28 +0100
Salah Triki <salah.triki@gmail.com> wrote:
> The calibbias cache (data->calibbias) was updated before the I2C
> write to TMP117_REG_TEMP_OFFSET was known to succeed. If the write
> failed, the function correctly returned an error, but the driver's
> internal cache had already been updated to the new value.
>
> This causes the cache and the actual hardware register to go out of
> sync: a subsequent write of the same value would be silently
> skipped by the early "if (off == data->calibbias) return 0;" check,
> since the cache matches even though the register was never
> successfully updated.
>
> Update data->calibbias only after confirming the I2C write
> succeeded, so the cache always reflects the actual state of the
> device.
>
> Fixes: df041e737a38 ("iio: temperature: add driver support for ti tmp117")
> Signed-off-by: Salah Triki <salah.triki@gmail.com>
> ---
> drivers/iio/temperature/tmp117.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c
> index 6bc18616ad15..7d74f401bb80 100644
> --- a/drivers/iio/temperature/tmp117.c
> +++ b/drivers/iio/temperature/tmp117.c
> @@ -95,15 +95,20 @@ static int tmp117_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec
> {
> struct tmp117_data *data = iio_priv(indio_dev);
> s16 off;
> + int ret;
>
> switch (mask) {
> case IIO_CHAN_INFO_CALIBBIAS:
> off = clamp_t(int, val, S16_MIN, S16_MAX);
> if (off == data->calibbias)
> return 0;
Add a blank line here.
> + ret = i2c_smbus_write_word_swapped(data->client, TMP117_REG_TEMP_OFFSET, off);
> +
And remove the blank line here - return value checks should be grouped
with the function we're checking.
> + if (ret)
> + return ret;
> +
> data->calibbias = off;
> - return i2c_smbus_write_word_swapped(data->client,
> - TMP117_REG_TEMP_OFFSET, off);
> + return 0;
>
> default:
> return -EINVAL;
--
Kind regards,
Joshua Crofts
next prev parent reply other threads:[~2026-08-22 8:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-22 0:49 [PATCH] iio: temperature: tmp117: fix calibbias cache update on I2C write failure Salah Triki
2026-08-22 8:16 ` Joshua Crofts [this message]
2026-08-22 18:29 ` David Lechner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260822101618.2690a7e9@systembl0wer \
--to=joshua.crofts1@gmail.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=puranjay@kernel.org \
--cc=salah.triki@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox