[PATCH v2 0/2] phy: spacemit: fix and enable the K1 USB 2.0 PHY

[Bruno Banelli <bbanelli@gmail.com>]

v1 was a single patch adding "default ARCH_SPACEMIT" to
PHY_SPACEMIT_K1_USB2.  Automated review pointed out two pre-existing
Kconfig problems in the same entry, and that change makes them easier
to hit: enabling the symbol by default means configurations that would
previously have left it off will now build the driver.

So fix the dependencies first, then enable it by default.

Both were verified against the driver source: phy-k1-usb2.c calls
devm_platform_ioremap_resource() and devm_regmap_init_mmio(), while the
Kconfig entry has neither "depends on HAS_IOMEM" nor
"select REGMAP_MMIO".  PHY_SPACEMIT_K1_PCIE, directly above it in the
same file, already has the HAS_IOMEM dependency.

Tested on a Milk-V Jupiter (SpacemiT M1) running mainline 7.2: without
patch 2/2 a "make defconfig" kernel has no USB at all, because
dwc3-generic-plat cannot get its PHY.

v1: https://lore.kernel.org/linux-riscv/20260825052158.66367-1-bbanelli@gmail.com/

Changes in v2:
 - new patch 1/2 adding "depends on HAS_IOMEM" and "select REGMAP_MMIO",
   with a Fixes: tag
 - no change to the patch now numbered 2/2

Bruno Banelli (2):
  phy: spacemit: fix K1 USB 2.0 PHY Kconfig dependencies
  phy: spacemit: enable K1 USB 2.0 PHY by default on ARCH_SPACEMIT

 drivers/phy/spacemit/Kconfig | 3 +++
 1 file changed, 3 insertions(+)


base-commit: 66498c75b4f8017f62d720d9b59675bdf3abce91
-- 
2.43.0