Re: [REGRESSION] 6.12.36+: usb: hub: post-resume delayed work triggers > uncorrected MCE / data fabric sync flood on Threadripper 7970X > (bisected to aec11e5f9c45)

[Michal Pecio <michal.pecio@gmail.com>]

On Tue, 25 Aug 2026 22:14:32 -0500, Mario Limonciello wrote:
> This isn't a BIOS regression, it's been around since the beginning on 
> this threadripper model but it was harder to trigger.
> The Linux kernel changes in the bisect exposed a platform issue.
> 
> The workaround you can do for now is to disable runtime PM on the
> XHCI controller to avoid triggering it.  But it's a platform issue.
> 
> For a proper fix you need to reach out to ASUS to get an AGESA
> upgrade. You can ask them to reach out to AMD if they need
> assistance/guidance on the versions that contain the fix for this.
> You can share this thread with them for reference.

This sounds like it's a known FW bug, so I suppose the exact failure
mechanism is known too. Is it triggered just by putting that PCI
function into D3 at a "wrong" time, or is there any USB/xHCI layer
involvement, particularly anything out of spec by software?

I ask because we know one case where dodgy SW actions cause some AMD
xHCI to malfunction, but the problem is contained in the USB layer and
the affected xHC doesn't bring down the whole SoC.

Any thoughts about the patch which reduces suspend delay for root hubs
specifically? It restores the original timing of PCI resume/suspend
cycles, at least as long as there are no external hubs connected, and
has just been reported to mitigate this problem.

Regards,
Michal