The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] dt-bindings: net: Add Synaptics SL2610 DWMAC
Date: Mon, 16 Nov 2026 21:54:37 +0800	[thread overview]
Message-ID: <20261116135442.4827-4-jszhang@kernel.org> (raw)
In-Reply-To: <20261116135442.4827-1-jszhang@kernel.org>

Describe the Synaptics SL2610 integration of the Synopsys DWMAC 5.20.
The PHY interface mode is selected through a system-controller register,
identified by a syscon phandle and register offset.

Restrict PHY modes to the RMII and RGMII variants supported by the glue
and extend the common DWMAC compatible list for the new integration.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Assisted-by: LLM
---
 .../devicetree/bindings/net/snps,dwmac.yaml   |  1 +
 .../bindings/net/syna,sl2610-dwmac.yaml       | 75 +++++++++++++++++++
 2 files changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 2c4842404bf6..267340a5f45c 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -119,6 +119,7 @@ properties:
         - sophgo,sg2044-dwmac
         - starfive,jh7100-dwmac
         - starfive,jh7110-dwmac
+        - syna,sl2610-dwmac
         - tesla,fsd-ethqos
         - thead,th1520-gmac
         - ultrarisc,dp1000-gmac
diff --git a/Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml b/Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml
new file mode 100644
index 000000000000..0748b623599b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/syna,sl2610-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics SL2610 DesignWare Ethernet MAC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: syna,sl2610-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: syna,sl2610-dwmac
+      - const: snps,dwmac-5.20
+
+  syna,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SL2610 system controller.
+          - description: Offset of the Ethernet interface control register.
+    description:
+      Phandle and register offset used to configure the Ethernet PHY
+      interface mode.
+
+  phy-mode:
+    enum:
+      - rmii
+      - rgmii
+      - rgmii-id
+      - rgmii-rxid
+      - rgmii-txid
+
+required:
+  - compatible
+  - syna,syscon
+  - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    chip: syscon@f7e10000 {
+        compatible = "syna,sl2610-soc-syscon", "syscon";
+        reg = <0xf7e10000 0x10000>;
+        clocks = <&osc>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    ethernet@f7a06000 {
+        compatible = "syna,sl2610-dwmac", "snps,dwmac-5.20";
+        reg = <0xf7a06000 0x2000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        phy-mode = "rgmii-id";
+        syna,syscon = <&chip 0xa3c>;
+    };
+...
-- 
2.55.0


  parent reply	other threads:[~2026-11-16 14:15 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16 13:54 [PATCH 0/8] net: stmmac: add SL2610 ethernet support Jisheng Zhang
2026-11-16 13:54 ` [PATCH 1/8] dt-bindings: net: Add MDIO demultiplexer Jisheng Zhang
2026-11-16 15:06   ` Andrew Lunn
2026-11-16 13:54 ` [PATCH 2/8] net: mdio: Add MDIO demultiplexer driver Jisheng Zhang
2026-11-16 13:54 ` Jisheng Zhang [this message]
2026-11-16 13:54 ` [PATCH 4/8] net: stmmac: Add glue layer for Synaptics SL2610 SoC Jisheng Zhang
2026-11-16 13:54 ` [PATCH 5/8] dt-bindings: soc: synaptics: Allow SL2610 mux controller children Jisheng Zhang
2026-11-16 13:54 ` [PATCH 6/8] soc: synaptics: Populate SL2610 system controller DT children Jisheng Zhang
2026-11-16 13:54 ` [PATCH 7/8] arm64: dts: synaptics: Add SL2610 Ethernet nodes Jisheng Zhang
2026-11-16 13:54 ` [PATCH 8/8] arm64: dts: synaptics: Enable Ethernet on SL2619 RDK Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116135442.4827-4-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox