The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Rustam Mustafin <rmustafin@cloudlinux.com>
To: Peter Huewe <peterhuewe@gmx.de>, Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>, Shuah Khan <shuah@kernel.org>,
	Jaewon Yang <yong010301@gmail.com>,
	linux-integrity@vger.kernel.org, linux-kselftest@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Rustam Mustafin <rmustafin@cloudlinux.com>
Subject: [RFC PATCH 1/1] tpm: Do not allow io_uring for /dev/tpm0 and /dev/tpmrm0
Date: Fri, 20 Nov 2026 21:21:16 +0700	[thread overview]
Message-ID: <20261120142116.1630010-2-rmustafin@cloudlinux.com> (raw)
In-Reply-To: <20261120142116.1630010-1-rmustafin@cloudlinux.com>

Add tpm_common_read_iter() and tpm_common_write_iter(), which fail
io_uring and AIO requests with -EIO. read() and write() are not
affected, as the VFS still calls ->read() and ->write() for them.
readv() and writev() now reach the new callbacks instead of the VFS
loop over ->read() and ->write(), so the callbacks keep that loop and
call tpm_common_read() and tpm_common_write() once per iovec.

Update the tpm_uring kselftest to expect -EIO, and check that the
rejected request leaves the whole response for the following read().

Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/av23L5HBpy2gbm3m@kernel.org
Signed-off-by: Rustam Mustafin <rmustafin@cloudlinux.com>
---
 drivers/char/tpm/tpm-dev-common.c        | 72 ++++++++++++++++++++++++
 drivers/char/tpm/tpm-dev.c               |  4 ++
 drivers/char/tpm/tpm-dev.h               |  4 ++
 drivers/char/tpm/tpmrm-dev.c             |  4 ++
 tools/testing/selftests/tpm2/tpm_uring.c | 14 ++---
 5 files changed, 91 insertions(+), 7 deletions(-)

diff --git a/drivers/char/tpm/tpm-dev-common.c b/drivers/char/tpm/tpm-dev-common.c
index 553fc6aca94d..e40a251315f3 100644
--- a/drivers/char/tpm/tpm-dev-common.c
+++ b/drivers/char/tpm/tpm-dev-common.c
@@ -13,8 +13,10 @@
  * Device file system interface to the TPM
  */
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/uio.h>
 #include <linux/workqueue.h>
 #include "tpm.h"
 #include "tpm-dev.h"
@@ -253,6 +255,76 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf,
 	return ret;
 }
 
+#ifdef CONFIG_IO_URING
+/*
+ * Reject io_uring and AIO. IORING_OP_READ_MULTISHOT requests use a
+ * synchronous kiocb, so also check for NOWAIT attempts and io-wq workers.
+ */
+static bool tpm_iter_is_async(struct kiocb *iocb)
+{
+	return !is_sync_kiocb(iocb) ||
+	       (iocb->ki_flags & IOCB_NOWAIT) ||
+	       (current->flags & PF_IO_WORKER);
+}
+
+/* Preserve the VFS fallback's per-iovec read/write semantics. */
+ssize_t tpm_common_read_iter(struct kiocb *iocb, struct iov_iter *to)
+{
+	struct file *file = iocb->ki_filp;
+	ssize_t ret = 0;
+
+	if (tpm_iter_is_async(iocb) || !user_backed_iter(to))
+		return -EIO;
+
+	while (iov_iter_count(to)) {
+		size_t len = iter_iov_len(to);
+		ssize_t nr;
+
+		nr = tpm_common_read(file, iter_iov_addr(to),
+				     len, &iocb->ki_pos);
+		if (nr < 0) {
+			if (!ret)
+				ret = nr;
+			break;
+		}
+		ret += nr;
+		iov_iter_advance(to, nr);
+		if (nr != len)
+			break;
+	}
+
+	return ret;
+}
+
+ssize_t tpm_common_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	ssize_t ret = 0;
+
+	if (tpm_iter_is_async(iocb) || !user_backed_iter(from))
+		return -EIO;
+
+	while (iov_iter_count(from)) {
+		size_t len = iter_iov_len(from);
+		ssize_t nr;
+
+		nr = tpm_common_write(file, iter_iov_addr(from),
+				      len, &iocb->ki_pos);
+		if (nr < 0) {
+			if (!ret)
+				ret = nr;
+			break;
+		}
+		ret += nr;
+		iov_iter_advance(from, nr);
+		if (nr != len)
+			break;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_IO_URING */
+
 __poll_t tpm_common_poll(struct file *file, poll_table *wait)
 {
 	struct file_priv *priv = file->private_data;
diff --git a/drivers/char/tpm/tpm-dev.c b/drivers/char/tpm/tpm-dev.c
index 74488f0a7b78..56751be46d90 100644
--- a/drivers/char/tpm/tpm-dev.c
+++ b/drivers/char/tpm/tpm-dev.c
@@ -62,6 +62,10 @@ const struct file_operations tpm_fops = {
 	.open = tpm_open,
 	.read = tpm_common_read,
 	.write = tpm_common_write,
+#ifdef CONFIG_IO_URING
+	.read_iter = tpm_common_read_iter,
+	.write_iter = tpm_common_write_iter,
+#endif
 	.poll = tpm_common_poll,
 	.release = tpm_release,
 };
diff --git a/drivers/char/tpm/tpm-dev.h b/drivers/char/tpm/tpm-dev.h
index 34efb1ffa491..22ea88156833 100644
--- a/drivers/char/tpm/tpm-dev.h
+++ b/drivers/char/tpm/tpm-dev.h
@@ -28,6 +28,10 @@ ssize_t tpm_common_read(struct file *file, char __user *buf,
 			size_t size, loff_t *off);
 ssize_t tpm_common_write(struct file *file, const char __user *buf,
 			 size_t size, loff_t *off);
+#ifdef CONFIG_IO_URING
+ssize_t tpm_common_read_iter(struct kiocb *iocb, struct iov_iter *to);
+ssize_t tpm_common_write_iter(struct kiocb *iocb, struct iov_iter *from);
+#endif
 __poll_t tpm_common_poll(struct file *file, poll_table *wait);
 
 void tpm_common_release(struct file *file, struct file_priv *priv);
diff --git a/drivers/char/tpm/tpmrm-dev.c b/drivers/char/tpm/tpmrm-dev.c
index 19e8f2779265..95788c6bdd4c 100644
--- a/drivers/char/tpm/tpmrm-dev.c
+++ b/drivers/char/tpm/tpmrm-dev.c
@@ -49,6 +49,10 @@ const struct file_operations tpmrm_fops = {
 	.open = tpmrm_open,
 	.read = tpm_common_read,
 	.write = tpm_common_write,
+#ifdef CONFIG_IO_URING
+	.read_iter = tpm_common_read_iter,
+	.write_iter = tpm_common_write_iter,
+#endif
 	.poll = tpm_common_poll,
 	.release = tpmrm_release,
 };
diff --git a/tools/testing/selftests/tpm2/tpm_uring.c b/tools/testing/selftests/tpm2/tpm_uring.c
index 9caa3cba5bf0..37b41c7d295b 100644
--- a/tools/testing/selftests/tpm2/tpm_uring.c
+++ b/tools/testing/selftests/tpm2/tpm_uring.c
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
- * An io_uring read chooses its own file offset. The TPM character devices
- * must ignore it and return the response from its start.
+ * The TPM character devices must reject io_uring reads.
  */
 
 #include <endian.h>
@@ -39,7 +38,7 @@ static void test_read(struct io_uring *ring, const char *path)
 	struct pollfd pfd = { .events = POLLIN };
 	struct io_uring_sqe *sqe;
 	struct io_uring_cqe *cqe;
-	int fd, ret, res;
+	int fd, ret, res, n;
 
 	fd = open(path, O_RDWR);
 	if (fd < 0) {
@@ -86,10 +85,11 @@ static void test_read(struct io_uring *ring, const char *path)
 	res = cqe->res;
 	io_uring_cqe_seen(ring);
 
-	/* the offset is ignored: the whole response, from its start */
-	ksft_test_result(res >= (int)sizeof(*hdr) &&
-			 be32toh(hdr->size) == res && !hdr->return_code,
-			 "%s: io_uring read %d\n", path, res);
+	/* the rejected read must leave the whole response in place */
+	n = read(fd, buf, BUF_LEN);
+	ksft_test_result(res == -EIO && n >= (int)sizeof(*hdr) &&
+			 be32toh(hdr->size) == n && !hdr->return_code,
+			 "%s: io_uring read %d, read() %d\n", path, res, n);
 out:
 	close(fd);
 }
-- 
2.52.0


      reply	other threads:[~2026-11-20 14:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 14:21 [RFC PATCH 0/1] tpm: Do not allow io_uring for /dev/tpm0 and /dev/tpmrm0 Rustam Mustafin
2026-11-20 14:21 ` Rustam Mustafin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120142116.1630010-2-rmustafin@cloudlinux.com \
    --to=rmustafin@cloudlinux.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=shuah@kernel.org \
    --cc=yong010301@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox