From: Miroslav Cimerman <mc@raidlab.org>
To: linux-btrfs@vger.kernel.org
Cc: David Sterba <dsterba@suse.com>, Chris Mason <mason@kernel.org>,
Naohiro Aota <naohiro.aota@wdc.com>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>,
Qu Wenruo <wqu@suse.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 0/2] btrfs: zoned: unwritten copies of mirrored data writes
Date: Sun, 22 Nov 2026 03:48:23 +0000 [thread overview]
Message-ID: <20261122034826.2333981-1-mc@raidlab.org> (raw)
On a zoned filesystem, a mirrored data write can lose a copy, or fail,
without any problem on the devices. Two bugs cause it. Both need writes
to one zone to arrive in a different order than they were allocated,
which parallel writers do.
1/2: since 7.0, every copy but the last is a regular write. A regular
write that arrives before an earlier one fails.
2/2: since 6.7, with the raid stripe tree, the zones of a block group
are finished when the extent at its end completes. Zone append writes of
other extents that are still queued then fail.
Tested in QEMU with KASAN on for-next 184fa2c40f5c, with two zoned
null_blk devices (1 GiB, 16 MiB zones, 8 active zones) and RAID1 data
and metadata on the raid stripe tree. 8 direct writers each wrote 4
files of 8 MiB, and 16 buffered writers did the same with fsync. At
least two runs each:
direct, 8 writers buffered, 16 writers
for-next 5 to 8 of 32 writes writes succeed, but some
fail with EIO copies are not written
with 1/2 writes succeed, but some no errors
copies are not written
with 2/2 writes succeed, but some writes succeed, but some
copies are not written copies are not written
with both no errors no errors
A copy that is not written shows up as a write error in the device
statistics ("errs: wr").
The series is based on 6b72ea3e75f4, which differs from the tested
commit only in qgroup.c.
On for-next, the next mount failed in 3 of 4 runs with "write pointer
offset mismatch". With both patches, it worked in every run. With the
single data profile, for-next shows no failure in the same tests. A set
of degraded-mount tests and the btrfs self-tests show no new failure
with the patches, also on top of my RAID1 series [1].
Each patch alone leaves the failures of the other, so they are sent
together. They apply to for-next without [1].
Found by an LLM while testing a fix on zoned RAID1. The analysis, the
fixes and the tests were done with the help of an LLM. I reviewed
everything.
FuzzyRAID, a fault-injection tester for RAID that is not public at the
moment, reproduced both bugs on its own and found no error with the
patches. With 1/2 missing, a scrub found the copy on one device corrupt
after the writes had succeeded.
[1] https://lore.kernel.org/linux-btrfs/20261121134550.216217-1-mc@raidlab.org/
Miroslav Cimerman (2):
btrfs: zoned: use zone append for every copy of a mirrored write
btrfs: zoned: finish raid stripe tree zones once all data is written
fs/btrfs/bio.c | 1 +
fs/btrfs/block-group.h | 6 ++++++
fs/btrfs/zoned.c | 33 +++++++++++++++++++++++++++++----
3 files changed, 36 insertions(+), 4 deletions(-)
base-commit: 6b72ea3e75f4d20a0ad1e9c95d7f9f1b8f192b92
--
2.53.0
next reply other threads:[~2026-11-22 3:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 3:48 Miroslav Cimerman [this message]
2026-11-22 3:48 ` [PATCH 1/2] btrfs: zoned: use zone append for every copy of a mirrored write Miroslav Cimerman
2026-11-22 3:48 ` [PATCH 2/2] btrfs: zoned: finish raid stripe tree zones once all data is written Miroslav Cimerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122034826.2333981-1-mc@raidlab.org \
--to=mc@raidlab.org \
--cc=dsterba@suse.com \
--cc=johannes.thumshirn@wdc.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mason@kernel.org \
--cc=naohiro.aota@wdc.com \
--cc=wqu@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox