From: Oleksandr Natalenko <oleksandr@natalenko.name>
To: rafael.j.wysocki@intel.com, Mario.Limonciello@amd.com,
viresh.kumar@linaro.org, Ray.Huang@amd.com,
gautham.shenoy@amd.com, Borislav.Petkov@amd.com,
Perry Yuan <perry.yuan@amd.com>
Cc: Alexander.Deucher@amd.com, Xinmei.Huang@amd.com,
Xiaojian.Du@amd.com, Li.Meng@amd.com, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/7] cpufreq: amd-pstate: initialize new core precision boost state
Date: Wed, 07 Feb 2024 15:45:20 +0100 [thread overview]
Message-ID: <2047184.tdWV9SEqCh@natalenko.name> (raw)
In-Reply-To: <b4d4ced021e608268e87d630de9ed271cf5f3277.1707297581.git.perry.yuan@amd.com>
[-- Attachment #1: Type: text/plain, Size: 5515 bytes --]
On středa 7. února 2024 10:21:52 CET Perry Yuan wrote:
> From: Perry Yuan <Perry.Yuan@amd.com>
>
> Add gloal global_params to represent current CPU Performance Boost(cpb)
> state for cpu frequency scaling, both active and passive modes all can
> support CPU cores frequency boosting control which is based on the BIOS
> setting, while BIOS turn on the "Core Performance Boost", it will
> allow OS control each core highest perf limitation from OS side.
>
> If core performance boost is disabled while a core is in a boosted P-state,
> the core transitions to the highest performance non-boosted P-state,
> that is the same as the nominal frequency limit.
>
> Reported-by: Artem S. Tashkinov" <aros@gmx.com>
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
> ---
> drivers/cpufreq/amd-pstate.c | 49 ++++++++++++------------------------
> include/linux/amd-pstate.h | 14 +++++++++++
> 2 files changed, 30 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 08e112444c27..3772f71f525f 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -67,6 +67,7 @@ static struct cpufreq_driver amd_pstate_epp_driver;
> static int cppc_state = AMD_PSTATE_UNDEFINED;
> static bool cppc_enabled;
> static bool amd_pstate_prefcore = true;
> +struct global_params global;
Doesn't this require `EXPORT_SYMBOL_GPL(global)` then? Otherwise with v6.8 I get this:
```
ERROR: modpost: "global" [drivers/cpufreq/amd-pstate-ut.ko] undefined!
```
If so, I'd pretty mush rename this to be less generic, say, `amd_pstate_global_params_struct` for the struct name itself and `amd_pstate_global_params` for the actual variable name.
>
> /*
> * AMD Energy Preference Performance (EPP)
> @@ -669,43 +670,21 @@ static int amd_get_lowest_nonlinear_freq(struct amd_cpudata *cpudata)
> return lowest_nonlinear_freq * 1000;
> }
>
> -static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state)
> +static int amd_pstate_boost_init(struct amd_cpudata *cpudata)
> {
> - struct amd_cpudata *cpudata = policy->driver_data;
> + u64 boost_val;
> int ret;
>
> - if (!cpudata->boost_supported) {
> - pr_err("Boost mode is not supported by this processor or SBIOS\n");
> - return -EINVAL;
> - }
> -
> - if (state)
> - policy->cpuinfo.max_freq = cpudata->max_freq;
> - else
> - policy->cpuinfo.max_freq = cpudata->nominal_freq;
> -
> - policy->max = policy->cpuinfo.max_freq;
> -
> - ret = freq_qos_update_request(&cpudata->req[1],
> - policy->cpuinfo.max_freq);
> - if (ret < 0)
> + ret = rdmsrl_on_cpu(cpudata->cpu, MSR_K7_HWCR, &boost_val);
> + if (ret) {
> + pr_err_once("failed to read initial CPU boost state!\n");
> return ret;
> + }
>
> - return 0;
> -}
> -
> -static void amd_pstate_boost_init(struct amd_cpudata *cpudata)
> -{
> - u32 highest_perf, nominal_perf;
> -
> - highest_perf = READ_ONCE(cpudata->highest_perf);
> - nominal_perf = READ_ONCE(cpudata->nominal_perf);
> -
> - if (highest_perf <= nominal_perf)
> - return;
> + global.cpb_supported = !((boost_val >> 25) & 0x1);
> + global.cpb_boost = global.cpb_supported;
>
> - cpudata->boost_supported = true;
> - current_pstate_driver->boost_enabled = true;
> + return ret;
> }
>
> static void amd_perf_ctl_reset(unsigned int cpu)
> @@ -848,6 +827,9 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
> if (ret)
> goto free_cpudata1;
>
> + /* initialize cpu cores boot state */
> + amd_pstate_boost_init(cpudata);
> +
> min_freq = amd_get_min_freq(cpudata);
> max_freq = amd_get_max_freq(cpudata);
> nominal_freq = amd_get_nominal_freq(cpudata);
> @@ -899,7 +881,6 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
>
> policy->driver_data = cpudata;
>
> - amd_pstate_boost_init(cpudata);
> if (!current_pstate_driver->adjust_perf)
> current_pstate_driver->adjust_perf = amd_pstate_adjust_perf;
>
> @@ -1310,6 +1291,9 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
> if (ret)
> goto free_cpudata1;
>
> + /* initialize cpu cores boot state */
> + amd_pstate_boost_init(cpudata);
> +
> min_freq = amd_get_min_freq(cpudata);
> max_freq = amd_get_max_freq(cpudata);
> nominal_freq = amd_get_nominal_freq(cpudata);
> @@ -1360,7 +1344,6 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
> return ret;
> WRITE_ONCE(cpudata->cppc_cap1_cached, value);
> }
> - amd_pstate_boost_init(cpudata);
>
> return 0;
>
> diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
> index d21838835abd..465e9295a60c 100644
> --- a/include/linux/amd-pstate.h
> +++ b/include/linux/amd-pstate.h
> @@ -124,4 +124,18 @@ static const char * const amd_pstate_mode_string[] = {
> [AMD_PSTATE_GUIDED] = "guided",
> NULL,
> };
> +
> +/**
> + * struct global_params - Global parameters, mostly tunable via sysfs.
> + * @cpb_boost: Whether or not to use boost CPU P-states.
> + * @cpb_supported: Whether or not CPU boost P-states are available
> + * based on the MSR_K7_HWCR bit[25] state
> + */
> +struct global_params {
> + bool cpb_boost;
> + bool cpb_supported;
> +};
> +
> +extern struct global_params global;
> +
> #endif /* _LINUX_AMD_PSTATE_H */
>
--
Oleksandr Natalenko (post-factum)
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2024-02-07 14:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-07 9:21 [PATCH v3 0/7] AMD Pstate Driver Core Performance Boost Perry Yuan
2024-02-07 9:21 ` [PATCH v3 1/7] cpufreq: amd-pstate: initialize new core precision boost state Perry Yuan
2024-02-07 14:45 ` Oleksandr Natalenko [this message]
2024-02-07 15:10 ` Oleksandr Natalenko
2024-02-08 4:19 ` Yuan, Perry
2024-02-07 9:21 ` [PATCH v3 2/7] cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control Perry Yuan
2024-02-07 9:21 ` [PATCH v3 3/7] cpufreq: amd-pstate: fix max_perf calculation for amd_get_max_freq() Perry Yuan
2024-02-07 9:21 ` [PATCH v3 4/7] cpufreq: amd-pstate: fix the MSR highest perf will be reset issue while cpb boost off Perry Yuan
2024-02-07 9:21 ` [PATCH v3 5/7] Documentation: cpufreq: amd-pstate: introduce the new cpu boost control method Perry Yuan
2024-02-07 9:21 ` [PATCH v3 6/7] cpufreq: amd-pstate: remove legacy set_boost callback for passive mode Perry Yuan
2024-02-07 10:10 ` Oleksandr Natalenko
2024-02-07 13:17 ` Yuan, Perry
2024-02-07 13:27 ` Oleksandr Natalenko
2024-02-07 13:35 ` Yuan, Perry
2024-02-07 9:21 ` [PATCH v3 7/7] cpufreq: amd-pstate-ut: support new cpb boost control interface Perry Yuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2047184.tdWV9SEqCh@natalenko.name \
--to=oleksandr@natalenko.name \
--cc=Alexander.Deucher@amd.com \
--cc=Borislav.Petkov@amd.com \
--cc=Li.Meng@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Ray.Huang@amd.com \
--cc=Xiaojian.Du@amd.com \
--cc=Xinmei.Huang@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=perry.yuan@amd.com \
--cc=rafael.j.wysocki@intel.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox