[PATCH 1/3] Char: moxa, eliminate busy waiting

[PATCH 1/3] Char: moxa, eliminate busy waiting

[Jiri Slaby]

moxa, eliminate busy waiting

blah, moxa delays 250+ ms in busy waiting, use msleep instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>

---
commit 3f4308a387d98370556455e729787cc47f200757
tree 26ae5bab0e6f56a06c71c8f15533f643d070da4f
parent 4ea1257b890befc706f6d43562ba68671db39195
author Jiri Slaby <jirislaby@gmail.com> Wed, 23 May 2007 16:24:40 +0200
committer Jiri Slaby <jirislaby@gmail.com> Wed, 23 May 2007 16:24:40 +0200

 drivers/char/moxa.c |   37 ++++++++++++-------------------------
 1 files changed, 12 insertions(+), 25 deletions(-)

diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index e0d35c2..ed76f0a 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -1405,7 +1405,6 @@ static int moxaCard;
 static struct mon_str moxaLog;
 static int moxaFuncTout = HZ / 2;
 
-static void moxadelay(int);
 static void moxafunc(void __iomem *, int, ushort);
 static void wait_finish(void __iomem *);
 static void low_water_check(void __iomem *);
@@ -2404,10 +2403,10 @@ void MoxaPortSendBreak(int port, int ms100)
 	ofsAddr = moxa_ports[port].tableAddr;
 	if (ms100) {
 		moxafunc(ofsAddr, FC_SendBreak, Magic_code);
-		moxadelay(ms100 * (HZ / 10));
+		msleep(ms100 * 10);
 	} else {
 		moxafunc(ofsAddr, FC_SendBreak, Magic_code);
-		moxadelay(HZ / 4);	/* 250 ms */
+		msleep(250);
 	}
 	moxafunc(ofsAddr, FC_StopBreak, Magic_code);
 }
@@ -2476,18 +2475,6 @@ static int moxa_set_serial_info(struct moxa_port *info,
 /*****************************************************************************
  *	Static local functions: 					     *
  *****************************************************************************/
-/*
- * moxadelay - delays a specified number ticks
- */
-static void moxadelay(int tick)
-{
-	unsigned long st, et;
-
-	st = jiffies;
-	et = st + tick;
-	while (time_before(jiffies, et));
-}
-
 static void moxafunc(void __iomem *ofsAddr, int cmd, ushort arg)
 {
 
@@ -2535,7 +2522,7 @@ static int moxaloadbios(int cardno, unsigned char __user *tmp, int len)
 		return -EFAULT;
 	baseAddr = moxa_boards[cardno].basemem;
 	writeb(HW_reset, baseAddr + Control_reg);	/* reset */
-	moxadelay(1);		/* delay 10 ms */
+	msleep(10);
 	for (i = 0; i < 4096; i++)
 		writeb(0, baseAddr + i);	/* clear fix page */
 	for (i = 0; i < len; i++)
@@ -2713,7 +2700,7 @@ static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
 			for (i = 0; i < 100; i++) {
 				if (readw(baseAddr + C218_key) == keycode)
 					break;
-				moxadelay(1);	/* delay 10 ms */
+				msleep(10);
 			}
 			if (readw(baseAddr + C218_key) != keycode) {
 				return (-1);
@@ -2725,7 +2712,7 @@ static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
 		for (i = 0; i < 100; i++) {
 			if (readw(baseAddr + C218_key) == keycode)
 				break;
-			moxadelay(1);	/* delay 10 ms */
+			msleep(10);
 		}
 		retry++;
 	} while ((readb(baseAddr + C218chksum_ok) != 1) && (retry < 3));
@@ -2736,7 +2723,7 @@ static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
 	for (i = 0; i < 100; i++) {
 		if (readw(baseAddr + Magic_no) == Magic_code)
 			break;
-		moxadelay(1);	/* delay 10 ms */
+		msleep(10);
 	}
 	if (readw(baseAddr + Magic_no) != Magic_code) {
 		return (-1);
@@ -2746,7 +2733,7 @@ static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
 	for (i = 0; i < 100; i++) {
 		if (readw(baseAddr + Magic_no) == Magic_code)
 			break;
-		moxadelay(1);	/* delay 10 ms */
+		msleep(10);
 	}
 	if (readw(baseAddr + Magic_no) != Magic_code) {
 		return (-1);
@@ -2788,7 +2775,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor
 			for (i = 0; i < 10; i++) {
 				if (readw(baseAddr + C320_key) == C320_KeyCode)
 					break;
-				moxadelay(1);
+				msleep(10);
 			}
 			if (readw(baseAddr + C320_key) != C320_KeyCode)
 				return (-1);
@@ -2799,7 +2786,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor
 		for (i = 0; i < 10; i++) {
 			if (readw(baseAddr + C320_key) == C320_KeyCode)
 				break;
-			moxadelay(1);
+			msleep(10);
 		}
 		retry++;
 	} while ((readb(baseAddr + C320chksum_ok) != 1) && (retry < 3));
@@ -2809,7 +2796,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor
 	for (i = 0; i < 600; i++) {
 		if (readw(baseAddr + Magic_no) == Magic_code)
 			break;
-		moxadelay(1);
+		msleep(10);
 	}
 	if (readw(baseAddr + Magic_no) != Magic_code)
 		return (-100);
@@ -2828,7 +2815,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor
 	for (i = 0; i < 500; i++) {
 		if (readw(baseAddr + Magic_no) == Magic_code)
 			break;
-		moxadelay(1);
+		msleep(10);
 	}
 	if (readw(baseAddr + Magic_no) != Magic_code)
 		return (-102);
@@ -2842,7 +2829,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor
 	for (i = 0; i < 600; i++) {
 		if (readw(baseAddr + Magic_no) == Magic_code)
 			break;
-		moxadelay(1);
+		msleep(10);
 	}
 	if (readw(baseAddr + Magic_no) != Magic_code)
 		return (-102);

[PATCH 2/3] Char: specialix, remove busy waiting

[Jiri Slaby]

specialix, remove busy waiting

use msleep instead, because not in atomic

Cc: Roger Wolff <R.E.Wolff@BitWizard.nl>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>

---
commit a677db846e7951118d0409956f4197cc01194f99
tree f0b69d293f8c779111a1a7f0cf9cc37cf164a0c6
parent 3f4308a387d98370556455e729787cc47f200757
author Jiri Slaby <jirislaby@gmail.com> Wed, 23 May 2007 16:46:36 +0200
committer Jiri Slaby <jirislaby@gmail.com> Wed, 23 May 2007 16:46:36 +0200

 drivers/char/specialix.c |   16 ++--------------
 1 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index baf7234..4558556 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -345,18 +345,6 @@ static inline void sx_release_io_range(struct specialix_board * bp)
 }
 
 
-/* Must be called with enabled interrupts */
-/* Ugly. Very ugly. Don't use this for anything else than initialization
-   code */
-static inline void sx_long_delay(unsigned long delay)
-{
-	unsigned long i;
-
-	for (i = jiffies + delay; time_after(i, jiffies); ) ;
-}
-
-
-
 /* Set the IRQ using the RTS lines that run to the PAL on the board.... */
 static int sx_set_irq ( struct specialix_board *bp)
 {
@@ -397,7 +385,7 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out_off(bp, CD186x_CCR, CCR_HARDRESET);      /* Reset CD186x chip          */
 	spin_unlock_irqrestore(&bp->lock, flags);
-	sx_long_delay(HZ/20);                      /* Delay 0.05 sec            */
+	msleep(50);					/* Delay 0.05 sec            */
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out_off(bp, CD186x_GIVR, SX_ID);             /* Set ID for this chip      */
 	sx_out_off(bp, CD186x_GICR, 0);                 /* Clear all bits            */
@@ -533,7 +521,7 @@ static int sx_probe(struct specialix_board *bp)
 		sx_wait_CCR(bp);
 		sx_out(bp, CD186x_CCR, CCR_TXEN);        /* Enable transmitter     */
 		sx_out(bp, CD186x_IER, IER_TXRDY);       /* Enable tx empty intr   */
-		sx_long_delay(HZ/20);
+		msleep(50);
 		irqs = probe_irq_off(irqs);
 
 		dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));

[PATCH 3/3] Char: riscom8, eliminate busy loop

[Jiri Slaby]

riscom8, eliminate busy loop

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>

---
commit 221eebee5eedfa7c2463dcbfb545b92595512310
tree ea667b3ef038cff3a0e86266d37d364766a17303
parent a677db846e7951118d0409956f4197cc01194f99
author Jiri Slaby <jirislaby@gmail.com> Wed, 23 May 2007 17:30:19 +0200
committer Jiri Slaby <jirislaby@gmail.com> Wed, 23 May 2007 17:30:19 +0200

 drivers/char/riscom8.c |   12 ++----------
 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 3494e3f..8ea231f 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -213,14 +213,6 @@ static inline void rc_release_io_range(struct riscom_board * const bp)
 		release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 }
 	
-/* Must be called with enabled interrupts */
-static inline void rc_long_delay(unsigned long delay)
-{
-	unsigned long i;
-	
-	for (i = jiffies + delay; time_after(i,jiffies); ) ;
-}
-
 /* Reset and setup CD180 chip */
 static void __init rc_init_CD180(struct riscom_board const * bp)
 {
@@ -231,7 +223,7 @@ static void __init rc_init_CD180(struct riscom_board const * bp)
 	rc_wait_CCR(bp);			   /* Wait for CCR ready        */
 	rc_out(bp, CD180_CCR, CCR_HARDRESET);      /* Reset CD180 chip          */
 	sti();
-	rc_long_delay(HZ/20);                      /* Delay 0.05 sec            */
+	msleep(50);				   /* Delay 0.05 sec            */
 	cli();
 	rc_out(bp, CD180_GIVR, RC_ID);             /* Set ID for this chip      */
 	rc_out(bp, CD180_GICR, 0);                 /* Clear all bits            */
@@ -280,7 +272,7 @@ static int __init rc_probe(struct riscom_board *bp)
 		rc_wait_CCR(bp);
 		rc_out(bp, CD180_CCR, CCR_TXEN);        /* Enable transmitter     */
 		rc_out(bp, CD180_IER, IER_TXRDY);       /* Enable tx empty intr   */
-		rc_long_delay(HZ/20);	       		
+		msleep(50);	       		
 		irqs = probe_irq_off(irqs);
 		val1 = rc_in(bp, RC_BSR);		/* Get Board Status reg   */
 		val2 = rc_in(bp, RC_ACK_TINT);          /* ACK interrupt          */