From: Tomasz Figa <tomasz.figa@gmail.com>
To: Doug Anderson <dianders@chromium.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Kukjin Kim <kgene.kim@samsung.com>,
Olof Johansson <olof@lixom.net>, Simon Glass <sjg@chromium.org>,
Luigi Semenzato <semenzato@chromium.org>,
ilho215.lee@samsung.com, eunki_kim@samsung.com,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/3] pinctrl: exynos: ack level-triggered interrupts before unmasking
Date: Thu, 13 Jun 2013 18:44:11 +0200 [thread overview]
Message-ID: <2132357.TpKeOTlAXO@flatron> (raw)
In-Reply-To: <1371141522-29255-3-git-send-email-dianders@chromium.org>
On Thursday 13 of June 2013 09:38:42 Doug Anderson wrote:
> A level-triggered interrupt should be acked after the interrupt line
> becomes inactive and before it is unmasked, or else another interrupt
> will be immediately triggered. Acking before or after calling the
> handler is not enough.
>
> Signed-off-by: Luigi Semenzato <semenzato@chromium.org>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> ---
> Changes in v2:
> - Greatly simplified using Tomasz's suggestion of irqd_get_trigger_type
> - Moved acking out of the bank spinlock since since it's not needed.
> - Linus W. has already applied parts 1 and 2, so not resending.
>
> drivers/pinctrl/pinctrl-exynos.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
Looks good. Thanks.
Acked-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
> diff --git a/drivers/pinctrl/pinctrl-exynos.c
> b/drivers/pinctrl/pinctrl-exynos.c index c0729a3..ef75321 100644
> --- a/drivers/pinctrl/pinctrl-exynos.c
> +++ b/drivers/pinctrl/pinctrl-exynos.c
> @@ -84,6 +84,17 @@ static void exynos_gpio_irq_unmask(struct irq_data
> *irqd) unsigned long mask;
> unsigned long flags;
>
> + /*
> + * Ack level interrupts right before unmask
> + *
> + * If we don't do this we'll get a double-interrupt. Level
triggered
> + * interrupts must not fire an interrupt if the level is not
> + * _currently_ active, even if it was active while the interrupt
was
> + * masked.
> + */
> + if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
> + exynos_gpio_irq_ack(irqd);
> +
> spin_lock_irqsave(&bank->slock, flags);
>
> mask = readl(d->virt_base + reg_mask);
> @@ -302,6 +313,17 @@ static void exynos_wkup_irq_unmask(struct irq_data
> *irqd) unsigned long mask;
> unsigned long flags;
>
> + /*
> + * Ack level interrupts right before unmask
> + *
> + * If we don't do this we'll get a double-interrupt. Level
triggered
> + * interrupts must not fire an interrupt if the level is not
> + * _currently_ active, even if it was active while the interrupt
was
> + * masked.
> + */
> + if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
> + exynos_wkup_irq_ack(irqd);
> +
> spin_lock_irqsave(&b->slock, flags);
>
> mask = readl(d->virt_base + reg_mask);
next prev parent reply other threads:[~2013-06-13 16:44 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-12 17:33 [PATCH 1/3] pinctrl: exynos: Add spinlocks to irq_mask and irq_unmask Doug Anderson
2013-06-12 17:33 ` [PATCH 2/3] pinctrl: exynos: reorder xyz_irq_unmask() so future patch can ack Doug Anderson
2013-06-13 11:14 ` Tomasz Figa
2013-06-13 12:01 ` Kukjin Kim
2013-06-13 12:32 ` Linus Walleij
2013-06-13 16:43 ` Doug Anderson
2013-06-12 17:33 ` [PATCH 3/3] pinctrl: exynos: ack level-triggered interrupts before unmasking Doug Anderson
2013-06-13 10:54 ` Tomasz Figa
2013-06-13 16:34 ` Doug Anderson
2013-06-13 16:40 ` Tomasz Figa
2013-06-13 12:04 ` Kukjin Kim
2013-06-13 16:38 ` Doug Anderson
2013-06-13 16:42 ` Tomasz Figa
2013-06-13 16:50 ` Doug Anderson
2013-06-13 23:13 ` Kukjin Kim
2013-06-14 0:00 ` Doug Anderson
2013-06-14 0:18 ` Kukjin Kim
2013-06-13 12:34 ` Linus Walleij
2013-06-13 11:03 ` [PATCH 1/3] pinctrl: exynos: Add spinlocks to irq_mask and irq_unmask Tomasz Figa
2013-06-13 12:00 ` Kukjin Kim
2013-06-13 12:29 ` Linus Walleij
2013-06-13 16:38 ` [PATCH v2 3/3] pinctrl: exynos: ack level-triggered interrupts before unmasking Doug Anderson
2013-06-13 16:44 ` Tomasz Figa [this message]
2013-06-13 18:20 ` Linus Walleij
2013-06-17 16:56 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2132357.TpKeOTlAXO@flatron \
--to=tomasz.figa@gmail.com \
--cc=dianders@chromium.org \
--cc=eunki_kim@samsung.com \
--cc=ilho215.lee@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=semenzato@chromium.org \
--cc=sjg@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox