From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux ACPI <linux-acpi@vger.kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>, Bob Moore <robert.moore@intel.com>
Subject: [PATCH 06/19] ACPICA: iASL/Disassembler: Additional support for NHLT table
Date: Wed, 22 Dec 2021 17:25:40 +0100 [thread overview]
Message-ID: <2168161.iZASKD2KPV@kreacher> (raw)
In-Reply-To: <11889746.O9o76ZdvQC@kreacher>
From: Bob Moore <robert.moore@intel.com>
ACPICA commit 0420852ffc520b81960e877852703b739c16025c
Added support for Vendor-defined microphone arrays and SNR
(signal-to-noise) extension.
Link: https://github.com/acpica/acpica/commit/0420852f
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
include/acpi/actbl2.h | 72 +++++++++++++++++++++++++------------------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 71ca090fd61b..380bff6bb2fd 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -1495,12 +1495,10 @@ struct acpi_nhlt_device_specific_config_a {
/* Values for Config Type above */
-#define ACPI_NHLT_TYPE_MIC_ARRAY 0x01
-#define ACPI_NHLT_TYPE_GENERIC 0x00
-
-/* Mask for Extension field of array_type */
-
-#define ACPI_NHLT_ARRAY_TYPE_MASK 0x10
+#define ACPI_NHLT_CONFIG_TYPE_GENERIC 0x00
+#define ACPI_NHLT_CONFIG_TYPE_MIC_ARRAY 0x01
+#define ACPI_NHLT_CONFIG_TYPE_RENDER_FEEDBACK 0x03
+#define ACPI_NHLT_CONFIG_TYPE_RESERVED 0x04 /* 4 and above are reserved */
struct acpi_nhlt_device_specific_config_b {
u32 capabilities_size;
@@ -1511,6 +1509,11 @@ struct acpi_nhlt_device_specific_config_c {
u8 virtual_slot;
};
+struct acpi_nhlt_render_device_specific_config {
+ u32 capabilities_size;
+ u8 virtual_slot;
+};
+
struct acpi_nhlt_wave_extensible {
u16 format_tag;
u16 channel_count;
@@ -1573,17 +1576,22 @@ struct acpi_nhlt_mic_device_specific_config {
/* Values for array_type_ext above */
-#define SMALL_LINEAR_2ELEMENT 0x0A
-#define BIG_LINEAR_2ELEMENT 0x0B
-#define FIRST_GEOMETRY_LINEAR_4ELEMENT 0x0C
-#define PLANAR_LSHAPED_4ELEMENT 0x0D
-#define SECOND_GEOMETRY_LINEAR_4ELEMENT 0x0E
-#define VENDOR_DEFINED 0x0F
-#define ARRAY_TYPE_MASK 0x0F
-#define ARRAY_TYPE_EXT_MASK 0x10
+#define ACPI_NHLT_ARRAY_TYPE_RESERVED 0x09 // 9 and below are reserved
+#define ACPI_NHLT_SMALL_LINEAR_2ELEMENT 0x0A
+#define ACPI_NHLT_BIG_LINEAR_2ELEMENT 0x0B
+#define ACPI_NHLT_FIRST_GEOMETRY_LINEAR_4ELEMENT 0x0C
+#define ACPI_NHLT_PLANAR_LSHAPED_4ELEMENT 0x0D
+#define ACPI_NHLT_SECOND_GEOMETRY_LINEAR_4ELEMENT 0x0E
+#define ACPI_NHLT_VENDOR_DEFINED 0x0F
+#define ACPI_NHLT_ARRAY_TYPE_MASK 0x0F
+#define ACPI_NHLT_ARRAY_TYPE_EXT_MASK 0x10
+
+#define ACPI_NHLT_NO_EXTENSION 0x0
+#define ACPI_NHLT_MIC_SNR_SENSITIVITY_EXT (1<<4)
-#define NO_EXTENSION 0x0
-#define MIC_SNR_SENSITIVITY_EXT 0x1
+struct acpi_nhlt_vendor_mic_count {
+ u8 microphone_count;
+};
struct acpi_nhlt_vendor_mic_config {
u8 type;
@@ -1603,22 +1611,25 @@ struct acpi_nhlt_vendor_mic_config {
/* Values for Type field above */
-#define MIC_OMNIDIRECTIONAL 0
-#define MIC_SUBCARDIOID 1
-#define MIC_CARDIOID 2
-#define MIC_SUPER_CARDIOID 3
-#define MIC_HYPER_CARDIOID 4
-#define MIC_8_SHAPED 5
-#define MIC_VENDOR_DEFINED 7
+#define ACPI_NHLT_MIC_OMNIDIRECTIONAL 0
+#define ACPI_NHLT_MIC_SUBCARDIOID 1
+#define ACPI_NHLT_MIC_CARDIOID 2
+#define ACPI_NHLT_MIC_SUPER_CARDIOID 3
+#define ACPI_NHLT_MIC_HYPER_CARDIOID 4
+#define ACPI_NHLT_MIC_8_SHAPED 5
+#define ACPI_NHLT_MIC_RESERVED6 6 // 6 is reserved
+#define ACPI_NHLT_MIC_VENDOR_DEFINED 7
+#define ACPI_NHLT_MIC_RESERVED 8 // 8 and above are reserved
/* Values for Panel field above */
-#define MIC_TOP 0
-#define MIC_BOTTOM 1
-#define MIC_LEFT 2
-#define MIC_RIGHT 3
-#define MIC_FRONT 4
-#define MIC_REAR 5
+#define ACPI_NHLT_MIC_POSITION_TOP 0
+#define ACPI_NHLT_MIC_POSITION_BOTTOM 1
+#define ACPI_NHLT_MIC_POSITION_LEFT 2
+#define ACPI_NHLT_MIC_POSITION_RIGHT 3
+#define ACPI_NHLT_MIC_POSITION_FRONT 4
+#define ACPI_NHLT_MIC_POSITION_BACK 5
+#define ACPI_NHLT_MIC_POSITION_RESERVED 6 // 6 and above are reserved
struct acpi_nhlt_vendor_mic_device_specific_config {
struct acpi_nhlt_mic_device_specific_config mic_array_device_config;
@@ -1633,8 +1644,9 @@ struct acpi_nhlt_mic_snr_sensitivity_extension {
u32 sensitivity;
};
+/* Render device with feedback */
+
struct acpi_nhlt_render_feedback_device_specific_config {
- struct acpi_nhlt_device_specific_config device_config;
u8 feedback_virtual_slot; // render slot in case of capture
u16 feedback_channels; // informative only
u16 feedback_valid_bits_per_sample;
--
2.26.2
next prev parent reply other threads:[~2021-12-22 16:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-22 15:56 [PATCH 00/19] ACPICA: ACPICA 20211217 Rafael J. Wysocki
2021-12-22 15:57 ` [PATCH 01/19] ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions Rafael J. Wysocki
2021-12-22 16:21 ` [PATCH 02/19] ACPICA: Use original data_table_region pointer for accesses Rafael J. Wysocki
2021-12-22 16:22 ` [PATCH 03/19] ACPICA: Use original pointer for virtual origin tables Rafael J. Wysocki
2021-12-22 16:23 ` [PATCH 04/19] ACPICA: Macros: Remove ACPI_PHYSADDR_TO_PTR Rafael J. Wysocki
2021-12-22 16:24 ` [PATCH 05/19] ACPICA: Avoid subobject buffer overflow when validating RSDP signature Rafael J. Wysocki
2021-12-22 16:25 ` Rafael J. Wysocki [this message]
2021-12-22 16:28 ` [PATCH 07/19] ACPICA: Fix AEST Processor generic resource substructure data field byte length Rafael J. Wysocki
2021-12-22 16:29 ` [PATCH 08/19] ACPICA: Utilities: Avoid deleting the same object twice in a row Rafael J. Wysocki
2021-12-22 16:31 ` [PATCH 09/19] ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R() Rafael J. Wysocki
2021-12-22 16:31 ` [PATCH 10/19] ACPICA: Fix wrong interpretation of PCC address Rafael J. Wysocki
2021-12-22 16:32 ` [PATCH 11/19] ACPICA: Add support for PCC Opregion special context data Rafael J. Wysocki
2021-12-22 16:33 ` [PATCH 12/19] ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5 Rafael J. Wysocki
2021-12-22 16:35 ` [PATCH 14/19] ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER) Rafael J. Wysocki
2021-12-22 16:35 ` [PATCH 15/19] ACPICA: Fixed a couple of warnings under MSVC Rafael J. Wysocki
2021-12-22 16:36 ` [PATCH 16/19] ACPICA: iASL: Add TDEL table to both compiler/disassembler Rafael J. Wysocki
2021-12-22 16:37 ` [PATCH 17/19] ACPICA: iASL: Add suppport for AGDI table Rafael J. Wysocki
2021-12-22 16:37 ` [PATCH 18/19] ACPICA: iASL/NHLT table: "Specific Data" field support Rafael J. Wysocki
2021-12-22 16:38 ` [PATCH 19/19] ACPICA: Update version to 20211217 Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2168161.iZASKD2KPV@kreacher \
--to=rjw@rjwysocki.net \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox