Re: [PATCH v5 2/9] drm/bridge: fsl-ldb: Get the next non-panel bridge

[Francesco Valla <francesco@valla.it>]

[-- Attachment #1: Type: text/plain, Size: 4320 bytes --]

Hi,

On Thursday, 11 September 2025 at 13:37:02 Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> wrote:
> From: Liu Ying <victor.liu@nxp.com>
> 
> The next bridge in bridge chain could be a panel bridge or a non-panel
> bridge.  Use devm_drm_of_get_bridge() to replace the combination
> function calls of of_drm_find_panel() and devm_drm_panel_bridge_add()
> to get either a panel bridge or a non-panel bridge, instead of getting
> a panel bridge only.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
>  drivers/gpu/drm/bridge/fsl-ldb.c | 31 +++++++++++--------------------
>  1 file changed, 11 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
> index 5c3cf37200bcee1db285c97e2b463c9355ee6acb..665053d0cb79d2b4f50e69c397863ab024553867 100644
> --- a/drivers/gpu/drm/bridge/fsl-ldb.c
> +++ b/drivers/gpu/drm/bridge/fsl-ldb.c
> @@ -15,7 +15,6 @@
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_of.h>
> -#include <drm/drm_panel.h>
>  
>  #define LDB_CTRL_CH0_ENABLE			BIT(0)
>  #define LDB_CTRL_CH0_DI_SELECT			BIT(1)
> @@ -86,7 +85,7 @@ static const struct fsl_ldb_devdata fsl_ldb_devdata[] = {
>  struct fsl_ldb {
>  	struct device *dev;
>  	struct drm_bridge bridge;
> -	struct drm_bridge *panel_bridge;
> +	struct drm_bridge *next_bridge;
>  	struct clk *clk;
>  	struct regmap *regmap;
>  	const struct fsl_ldb_devdata *devdata;
> @@ -118,7 +117,7 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
>  {
>  	struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
>  
> -	return drm_bridge_attach(encoder, fsl_ldb->panel_bridge,
> +	return drm_bridge_attach(encoder, fsl_ldb->next_bridge,
>  				 bridge, flags);
>  }
>  
> @@ -292,9 +291,7 @@ static const struct drm_bridge_funcs funcs = {
>  static int fsl_ldb_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> -	struct device_node *panel_node;
>  	struct device_node *remote1, *remote2;
> -	struct drm_panel *panel;
>  	struct fsl_ldb *fsl_ldb;
>  	int dual_link;
>  
> @@ -317,33 +314,27 @@ static int fsl_ldb_probe(struct platform_device *pdev)
>  	if (IS_ERR(fsl_ldb->regmap))
>  		return PTR_ERR(fsl_ldb->regmap);
>  
> -	/* Locate the remote ports and the panel node */
> +	/* Locate the remote ports. */
>  	remote1 = of_graph_get_remote_node(dev->of_node, 1, 0);
>  	remote2 = of_graph_get_remote_node(dev->of_node, 2, 0);
>  	fsl_ldb->ch0_enabled = (remote1 != NULL);
>  	fsl_ldb->ch1_enabled = (remote2 != NULL);
> -	panel_node = of_node_get(remote1 ? remote1 : remote2);
>  	of_node_put(remote1);
>  	of_node_put(remote2);
>  
> -	if (!fsl_ldb->ch0_enabled && !fsl_ldb->ch1_enabled) {
> -		of_node_put(panel_node);
> -		return dev_err_probe(dev, -ENXIO, "No panel node found");
> -	}
> +	if (!fsl_ldb->ch0_enabled && !fsl_ldb->ch1_enabled)
> +		return dev_err_probe(dev, -ENXIO, "No next bridge node found");
>  
>  	dev_dbg(dev, "Using %s\n",
>  		fsl_ldb_is_dual(fsl_ldb) ? "dual-link mode" :
>  		fsl_ldb->ch0_enabled ? "channel 0" : "channel 1");
>  
> -	panel = of_drm_find_panel(panel_node);
> -	of_node_put(panel_node);
> -	if (IS_ERR(panel))
> -		return PTR_ERR(panel);
> -
> -	fsl_ldb->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> -	if (IS_ERR(fsl_ldb->panel_bridge))
> -		return PTR_ERR(fsl_ldb->panel_bridge);
> -
> +	fsl_ldb->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node,
> +						      fsl_ldb->ch0_enabled ? 1 : 2,
> +						      0);
> +	if (IS_ERR(fsl_ldb->next_bridge))
> +		return dev_err_probe(dev, PTR_ERR(fsl_ldb->next_bridge),
> +				     "failed to get next bridge\n");
>  
>  	if (fsl_ldb_is_dual(fsl_ldb)) {
>  		struct device_node *port1, *port2;
> 
> 

Reviewed-by: Francesco Valla <francesco@valla.it>

This is also required to complete support for some of the i.MX8MP
platforms for which a DTS already exists, as well as for upcoming i.MX93
work (see [2]).

[1] https://elixir.bootlin.com/linux/v6.17.5/source/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
[2] https://lore.kernel.org/all/20251028-imx93_ldb_bridge-v1-1-fca2e7d60e0a@valla.it/


Thank you!

Francesco


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 228 bytes --]