From: Dave Airlie <airlied@gmail.com>
To: Miles Lane <miles.lane@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: Re: OOPS in 2.6.13-rc1-mm1 -- EIP is at sysfs_release+0x49/0xb0
Date: Wed, 13 Jul 2005 17:17:28 +1000 [thread overview]
Message-ID: <21d7e99705071300173ae0c39b@mail.gmail.com> (raw)
In-Reply-To: <1121055986.10029.9.camel@localhost.localdomain>
> Thanks Dave,
>
> I switched to the i915 kernel driver and still got the OOPS.
> I also continue to get the overlapping mtrr message. I am currently
> testing 2.6.13-rc2-git3. I have tried to run strace with hald, but
> cannot reproduce the problem this way. I am not sure I am invoking the
> command corrently. I have written to the hal developers, but have not
> received a response yet. Here's the current output:
>
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my
system... the mtrr overlaps are just vesafb setting up the mtrrs, you
might try without vesafb...
Dave.
> mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary
> mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> Unable to handle kernel paging request at virtual address 5f78735f
> printing eip:
> c01e491a
> *pde = 00000000
> Oops: 0002 [#1]
> PREEMPT
> Modules linked in: pcmcia ipv6 af_packet ohci1394 yenta_socket
> rsrc_nonstatic pcmcia_core ipw2200 firmware_class ieee80211
> ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss
> snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801
> uhci_hcd rtc nls_cp437 sbp2 ieee1394 psmouse ide_cd cdrom
> CPU: 0
> EIP: 0060:[<c01e491a>] Not tainted VLI
> EFLAGS: 00010206 (2.6.13-rc2-git3)
> EIP is at sysfs_release+0x4e/0xa6
> eax: 5f78735f ebx: c1b0e268 ecx: 00000001 edx: c9138000
> esi: 5f78725f edi: c93dfde0 ebp: c9139f3c esp: c9139f2c
> ds: 007b es: 007b ss: 0068
> Process hald (pid: 4615, threadinfo=c9138000 task=c9092a80)
> Stack: c1b0e268 c90c6658 00000000 c18a4a70 c9139f60 c018c8cd c8c0f3d0
> c90c6658
> c93f87b0 c8c0f3d0 c90c6658 00000000 f731dab0 c9139f68 c018c86b
> c9139f84
> c018aca9 c90c6658 f731dab0 c90c6658 f731dab0 00000010 c9139fb4
> c018addb
> Call Trace:
> [<c0104bde>] show_stack+0x9c/0xd2
> [<c0104dce>] show_registers+0x19a/0x234
> [<c0105049>] die+0x152/0x2e2
> [<c011d740>] do_page_fault+0x250/0x6fa
> [<c01046b7>] error_code+0x4f/0x54
> [<c018c8cd>] __fput+0x5c/0x174
> [<c018c86b>] fput+0x18/0x1e
> [<c018aca9>] filp_close+0x4a/0x70
> [<c018addb>] sys_close+0x10c/0x266
> [<c0103bb3>] sysenter_past_esp+0x54/0x75
> Code: 78 85 db 74 08 89 1c 24 e8 68 c8 08 00 85 f6 74 39 b8 01 00 00 00
> e8 c8 e5 f3 ff e8 51 1a 09 00 c1 e0 07 05 00 01 00 00 8d 04 06 <ff> 08
> 83 3e 02 74 3c b8 01 00 00 00 e8 d9 e5 f3 ff b8 00 e0 ff
> <6>note: hald[4615] exited with preempt_count 1
> Debug: sleeping function called from invalid context at
> include/linux/rwsem.h:43in_atomic():1, irqs_disabled():0
> [<c0104c32>] dump_stack+0x1e/0x20
> [<c0124b69>] __might_sleep+0x9e/0xad
> [<c012bf0f>] exit_mm+0x3a/0x2b0
> [<c012cd0a>] do_exit+0xe0/0x83b
> [<c01051cf>] die+0x2d8/0x2e2
> [<c011d740>] do_page_fault+0x250/0x6fa
> [<c01046b7>] error_code+0x4f/0x54
> [<c018c8cd>] __fput+0x5c/0x174
> [<c018c86b>] fput+0x18/0x1e
> [<c018aca9>] filp_close+0x4a/0x70
> [<c018addb>] sys_close+0x10c/0x266
> [<c0103bb3>] sysenter_past_esp+0x54/0x75
>
>
>
next prev parent reply other threads:[~2005-07-13 7:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-03 8:41 OOPS in 2.6.13-rc1-mm1 -- EIP is at sysfs_release+0x49/0xb0 Miles Lane
2005-07-06 22:27 ` Andrew Morton
2005-07-07 1:41 ` Schneelocke
2005-07-07 10:31 ` Dave Airlie
2005-07-07 14:56 ` Miles Lane
2005-07-11 4:26 ` Miles Lane
2005-07-13 7:17 ` Dave Airlie [this message]
2005-07-13 14:54 ` Miles Lane
2005-07-13 19:42 ` randy_dunlap
2005-08-08 16:53 ` Sonny Rao
2005-08-08 17:44 ` Andrew Morton
2005-08-08 20:18 ` Sonny Rao
2005-08-08 23:09 ` Keith Owens
2005-08-08 23:59 ` Sonny Rao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=21d7e99705071300173ae0c39b@mail.gmail.com \
--to=airlied@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=miles.lane@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox