From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755013AbcGHMd4 (ORCPT ); Fri, 8 Jul 2016 08:33:56 -0400 Received: from gloria.sntech.de ([95.129.55.99]:47852 "EHLO gloria.sntech.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754743AbcGHMdt (ORCPT ); Fri, 8 Jul 2016 08:33:49 -0400 From: Heiko Stuebner To: William Wu Cc: gregkh@linuxfoundation.org, balbi@kernel.org, linux-rockchip@lists.infradead.org, briannorris@google.com, dianders@google.com, kever.yang@rock-chips.com, huangtao@rock-chips.com, frank.wang@rock-chips.com, eddie.cai@rock-chips.com, John.Youn@synopsys.com, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org Subject: Re: [PATCH v6 3/5] usb: dwc3: add phyif_utmi_quirk Date: Fri, 08 Jul 2016 14:33:09 +0200 Message-ID: <2213342.0Nx5tnEW8p@phil> User-Agent: KMail/4.14.10 (Linux/4.3.0-1-amd64; KDE/4.14.14; x86_64; ; ) In-Reply-To: <1467860066-15142-4-git-send-email-william.wu@rock-chips.com> References: <1467860066-15142-1-git-send-email-william.wu@rock-chips.com> <1467860066-15142-4-git-send-email-william.wu@rock-chips.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi William, Am Donnerstag, 7. Juli 2016, 10:54:24 schrieb William Wu: > Add a quirk to configure the core to support the > UTMI+ PHY with an 8- or 16-bit interface. UTMI+ PHY > interface is hardware property, and it's platform > dependent. Normall, the PHYIf can be configured > during coreconsultant. But for some specific usb > cores(e.g. rk3399 soc dwc3), the default PHYIf > configuration value is fault, so we need to > reconfigure it by software. > > And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM > must be set to the corresponding value according to > the UTMI+ PHY interface. > > Signed-off-by: William Wu > --- [...] > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > b/Documentation/devicetree/bindings/usb/dwc3.txt index 020b0e9..8d7317d > 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -42,6 +42,10 @@ Optional properties: > - snps,dis-u2-freeclk-exists-quirk: when set, clear the > u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 PHY doesn't provide > a free-running PHY clock. > + - snps,phyif-utmi-quirk: when set core will set phyif UTMI+ interface. > + - snps,phyif-utmi: the value to configure the core to support a UTMI+ > PHY + with an 8- or 16-bit interface. Value 0 select 8-bit > + interface, value 1 select 16-bit interface. maybe snps,phyif-utmi-width = <8> or <16>; devicetree is about describing the hardware, not the things that get written to registers :-) . The conversion from the described width to the register value can easily be done in the driver. Also I don't think you need two properties for this. If the snps,phyif-utmi property is specified it indicates that you want to manually set the width and if it is absent you want to use the IC default. All functions reading property-values indicate if the property is missing. But it looks like there is already a precendence in snps,tx_de_emphasis(_quirk), so maybe Felipe has a different opinion here? > - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal > utmi_l1_suspend_n, false when asserts utmi_sleep_n > - snps,hird-threshold: HIRD threshold > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 0b7bfd2..94036b1 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -408,6 +408,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) > static int dwc3_phy_setup(struct dwc3 *dwc) > { > u32 reg; > + u32 usbtrdtim; > int ret; > > reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); > @@ -503,6 +504,15 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > if (dwc->dis_u2_freeclk_exists_quirk) > reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; > > + if (dwc->phyif_utmi_quirk) { > + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | > + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); > + usbtrdtim = dwc->phyif_utmi ? USBTRDTIM_UTMI_16_BIT : > + USBTRDTIM_UTMI_8_BIT; > + reg |= DWC3_GUSB2PHYCFG_PHYIF(dwc->phyif_utmi) | > + DWC3_GUSB2PHYCFG_USBTRDTIM(usbtrdtim); > + } > + > dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); > > return 0; > @@ -834,6 +844,7 @@ static int dwc3_probe(struct platform_device *pdev) > struct resource *res; > struct dwc3 *dwc; > u8 lpm_nyet_threshold; > + u8 phyif_utmi; > u8 tx_de_emphasis; > u8 hird_threshold; > > @@ -880,6 +891,9 @@ static int dwc3_probe(struct platform_device *pdev) > /* default to highest possible threshold */ > lpm_nyet_threshold = 0xff; > > + /* default to UTMI+ 8-bit interface */ > + phyif_utmi = 0; > + > /* default to -3.5dB de-emphasis */ > tx_de_emphasis = 1; > > @@ -929,6 +943,10 @@ static int dwc3_probe(struct platform_device *pdev) > "snps,dis_rxdet_inp3_quirk"); > dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev, > "snps,dis-u2-freeclk-exists-quirk"); > + dwc->phyif_utmi_quirk = device_property_read_bool(dev, > + "snps,phyif-utmi-quirk"); > + device_property_read_u8(dev, "snps,phyif-utmi", > + &phyif_utmi); As described above device_property_read_u8 will return an error if the property is not present, so you could fill your dwc->phyif_utmi_quirk from that: ret = device_property_read_u8(dev, "snps,phyif-utmi", &phyif_utmi); dwc->phyif_utmi_quirk = (ret == 0) ? true : false; Heiko