[PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[Dongjin Kim]

Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
---
 arch/arm/boot/dts/Makefile               |    1 +
 arch/arm/boot/dts/exynos4412-odroidx.dts |   52 ++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ca6fb8e..3355af9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-odroidx.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
new file mode 100644
index 0000000..786ddd7
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -0,0 +1,52 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		samsung,cd-pinmux-gpio = <&gpk2 2 2 3 3>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
-- 
1.7.9.5

Re: [PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[Thomas Abraham]

Hi Dongjin,

On 17 December 2012 13:55, Dongjin Kim <tobetter@gmail.com> wrote:
> Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
>
> Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile               |    1 +
>  arch/arm/boot/dts/exynos4412-odroidx.dts |   52 ++++++++++++++++++++++++++++++
>  2 files changed, 53 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ca6fb8e..3355af9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>         exynos5250-smdk5250.dtb \
>         exynos5440-ssdk5440.dtb \
>         exynos4412-smdk4412.dtb \
> +       exynos4412-odroidx.dtb \
>         exynos5250-smdk5250.dtb \
>         exynos5250-snow.dtb
>  dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> new file mode 100644
> index 0000000..786ddd7
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -0,0 +1,52 @@
> +/*
> + * Hardkernel's Exynos4412 based ODROID-X board device tree source
> + *
> + * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>
> + *
> + * Device tree source file for Hardkernel's ODROID-X board which is based on
> + * Samsung's Exynos4412 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +/include/ "exynos4412.dtsi"
> +
> +/ {
> +       model = "Hardkernel ODROID-X board based on Exynos4412";
> +       compatible = "samsung,exynos4412";
> +
> +       memory {
> +               reg = <0x40000000 0x40000000>;
> +       };
> +
> +       chosen {
> +               bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";
> +       };
> +
> +       serial@13800000 {
> +               status = "okay";
> +       };
> +
> +       serial@13810000 {
> +               status = "okay";
> +       };
> +
> +       serial@13820000 {
> +               status = "okay";
> +       };
> +
> +       serial@13830000 {
> +               status = "okay";
> +       };
> +
> +       sdhci@12530000 {
> +               bus-width = <4>;
> +               samsung,cd-pinmux-gpio = <&gpk2 2 2 3 3>;

The card detect line should also be configured using pinctrl
interface. When pinctrl is enabled on Exynos, the old-style gpio
bindings is not supported. So a pinctrl node for sd2_cmd should be
defined which then can be listed in pinctrl-0.

> +               pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
> +               pinctrl-names = "default";
> +               status = "okay";
> +       };
> +};
> --
> 1.7.9.5
>

Re: [PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[Olof Johansson]

On Mon, Dec 17, 2012 at 11:55 AM, Dongjin Kim <tobetter@gmail.com> wrote:
> Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
>
> Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile               |    1 +
>  arch/arm/boot/dts/exynos4412-odroidx.dts |   52 ++++++++++++++++++++++++++++++
>  2 files changed, 53 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ca6fb8e..3355af9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>         exynos5250-smdk5250.dtb \
>         exynos5440-ssdk5440.dtb \
>         exynos4412-smdk4412.dtb \
> +       exynos4412-odroidx.dtb \

Please add them alphabetically, so before smdk.

> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> new file mode 100644
> index 0000000..786ddd7
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -0,0 +1,52 @@
> +/*
> + * Hardkernel's Exynos4412 based ODROID-X board device tree source
> + *
> + * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>

Are you from the future?

> + *
> + * Device tree source file for Hardkernel's ODROID-X board which is based on
> + * Samsung's Exynos4412 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +/include/ "exynos4412.dtsi"
> +
> +/ {
> +       model = "Hardkernel ODROID-X board based on Exynos4412";
> +       compatible = "samsung,exynos4412";

It should have a more specific compatible value first, i.e.
"hardkernel,odroid-x" or similar.


> +       memory {
> +               reg = <0x40000000 0x40000000>;
> +       };
> +
> +       chosen {
> +               bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";

Bootargs should be passed in from u-boot, don't specify them in the
static device tree.



-Olof

Re: [PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[Jean-Christophe PLAGNIOL-VILLARD]

On 17:56 Mon 17 Dec     , Olof Johansson wrote:
> On Mon, Dec 17, 2012 at 11:55 AM, Dongjin Kim <tobetter@gmail.com> wrote:
> > Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
> >
> > Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> > ---
> >  arch/arm/boot/dts/Makefile               |    1 +
> >  arch/arm/boot/dts/exynos4412-odroidx.dts |   52 ++++++++++++++++++++++++++++++
> >  2 files changed, 53 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index ca6fb8e..3355af9 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> >         exynos5250-smdk5250.dtb \
> >         exynos5440-ssdk5440.dtb \
> >         exynos4412-smdk4412.dtb \
> > +       exynos4412-odroidx.dtb \
> 
> Please add them alphabetically, so before smdk.
we need to drop the \ \ stuff it will end with merge conflict
as if you add 2 dtb at the end you will end with 2 patch that touch the same
previous line
> 
> > diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> > new file mode 100644
> > index 0000000..786ddd7
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> > @@ -0,0 +1,52 @@
> > +/*
> > + * Hardkernel's Exynos4412 based ODROID-X board device tree source
> > + *
> > + * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>
> 
> Are you from the future?
> 
> > + *
> > + * Device tree source file for Hardkernel's ODROID-X board which is based on
> > + * Samsung's Exynos4412 SoC.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +/dts-v1/;
> > +/include/ "exynos4412.dtsi"
> > +
> > +/ {
> > +       model = "Hardkernel ODROID-X board based on Exynos4412";
> > +       compatible = "samsung,exynos4412";
> 
> It should have a more specific compatible value first, i.e.
> "hardkernel,odroid-x" or similar.
> 
> 
> > +       memory {
> > +               reg = <0x40000000 0x40000000>;
> > +       };
> > +
> > +       chosen {
> > +               bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";
> 
> Bootargs should be passed in from u-boot, don't specify them in the
> static device tree.

why not we can choose to have a default cmdline and even usit as a complement
of the bootloader one

it's up to the dts maintainer to choose

Best Regards,
J.

Re: [PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[Olof Johansson]

On Mon, Dec 17, 2012 at 10:00 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
> On 17:56 Mon 17 Dec     , Olof Johansson wrote:
>> On Mon, Dec 17, 2012 at 11:55 AM, Dongjin Kim <tobetter@gmail.com> wrote:
>> > Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
>> >
>> > Signed-off-by: Dongjin Kim <tobetter@gmail.com>
>> > ---
>> >  arch/arm/boot/dts/Makefile               |    1 +
>> >  arch/arm/boot/dts/exynos4412-odroidx.dts |   52 ++++++++++++++++++++++++++++++
>> >  2 files changed, 53 insertions(+)
>> >  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
>> >
>> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> > index ca6fb8e..3355af9 100644
>> > --- a/arch/arm/boot/dts/Makefile
>> > +++ b/arch/arm/boot/dts/Makefile
>> > @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>> >         exynos5250-smdk5250.dtb \
>> >         exynos5440-ssdk5440.dtb \
>> >         exynos4412-smdk4412.dtb \
>> > +       exynos4412-odroidx.dtb \
>>
>> Please add them alphabetically, so before smdk.
> we need to drop the \ \ stuff it will end with merge conflict
> as if you add 2 dtb at the end you will end with 2 patch that touch the same
> previous line

..which is why the dts files should be added alphabetically instead of
just appended to the list.

>> > diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
>> > new file mode 100644
>> > index 0000000..786ddd7
>> > --- /dev/null
>> > +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
>> > @@ -0,0 +1,52 @@
>> > +/*
>> > + * Hardkernel's Exynos4412 based ODROID-X board device tree source
>> > + *
>> > + * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>
>>
>> Are you from the future?
>>
>> > + *
>> > + * Device tree source file for Hardkernel's ODROID-X board which is based on
>> > + * Samsung's Exynos4412 SoC.
>> > + *
>> > + * This program is free software; you can redistribute it and/or modify
>> > + * it under the terms of the GNU General Public License version 2 as
>> > + * published by the Free Software Foundation.
>> > +*/
>> > +
>> > +/dts-v1/;
>> > +/include/ "exynos4412.dtsi"
>> > +
>> > +/ {
>> > +       model = "Hardkernel ODROID-X board based on Exynos4412";
>> > +       compatible = "samsung,exynos4412";
>>
>> It should have a more specific compatible value first, i.e.
>> "hardkernel,odroid-x" or similar.
>>
>>
>> > +       memory {
>> > +               reg = <0x40000000 0x40000000>;
>> > +       };
>> > +
>> > +       chosen {
>> > +               bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";
>>
>> Bootargs should be passed in from u-boot, don't specify them in the
>> static device tree.
>
> why not we can choose to have a default cmdline and even usit as a complement
> of the bootloader one
>
> it's up to the dts maintainer to choose

The chance of having a valid generic command line that will work for
everyone with that hardware is fairly small, especially on more
generic systems that might have a regular distro installed on them.


-Olof

Re: [PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X

[Jean-Christophe PLAGNIOL-VILLARD]

On 22:14 Mon 17 Dec     , Olof Johansson wrote:
> On Mon, Dec 17, 2012 at 10:00 PM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
> > On 17:56 Mon 17 Dec     , Olof Johansson wrote:
> >> On Mon, Dec 17, 2012 at 11:55 AM, Dongjin Kim <tobetter@gmail.com> wrote:
> >> > Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
> >> >
> >> > Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> >> > ---
> >> >  arch/arm/boot/dts/Makefile               |    1 +
> >> >  arch/arm/boot/dts/exynos4412-odroidx.dts |   52 ++++++++++++++++++++++++++++++
> >> >  2 files changed, 53 insertions(+)
> >> >  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
> >> >
> >> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> >> > index ca6fb8e..3355af9 100644
> >> > --- a/arch/arm/boot/dts/Makefile
> >> > +++ b/arch/arm/boot/dts/Makefile
> >> > @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> >> >         exynos5250-smdk5250.dtb \
> >> >         exynos5440-ssdk5440.dtb \
> >> >         exynos4412-smdk4412.dtb \
> >> > +       exynos4412-odroidx.dtb \
> >>
> >> Please add them alphabetically, so before smdk.
> > we need to drop the \ \ stuff it will end with merge conflict
> > as if you add 2 dtb at the end you will end with 2 patch that touch the same
> > previous line
> 
> ..which is why the dts files should be added alphabetically instead of
> just appended to the list.
we need to drop this \

and use this syntax and keep ordered
dtb-$() +=

> 
> >> > diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> >> > new file mode 100644
> >> > index 0000000..786ddd7
> >> > --- /dev/null
> >> > +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> >> > @@ -0,0 +1,52 @@
> >> > +/*
> >> > + * Hardkernel's Exynos4412 based ODROID-X board device tree source
> >> > + *
> >> > + * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>
> >>
> >> Are you from the future?
> >>
> >> > + *
> >> > + * Device tree source file for Hardkernel's ODROID-X board which is based on
> >> > + * Samsung's Exynos4412 SoC.
> >> > + *
> >> > + * This program is free software; you can redistribute it and/or modify
> >> > + * it under the terms of the GNU General Public License version 2 as
> >> > + * published by the Free Software Foundation.
> >> > +*/
> >> > +
> >> > +/dts-v1/;
> >> > +/include/ "exynos4412.dtsi"
> >> > +
> >> > +/ {
> >> > +       model = "Hardkernel ODROID-X board based on Exynos4412";
> >> > +       compatible = "samsung,exynos4412";
> >>
> >> It should have a more specific compatible value first, i.e.
> >> "hardkernel,odroid-x" or similar.
> >>
> >>
> >> > +       memory {
> >> > +               reg = <0x40000000 0x40000000>;
> >> > +       };
> >> > +
> >> > +       chosen {
> >> > +               bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";
> >>
> >> Bootargs should be passed in from u-boot, don't specify them in the
> >> static device tree.
> >
> > why not we can choose to have a default cmdline and even usit as a complement
> > of the bootloader one
> >
> > it's up to the dts maintainer to choose
> 
> The chance of having a valid generic command line that will work for
> everyone with that hardware is fairly small, especially on more
> generic systems that might have a regular distro installed on them.

this does not hurt anyone 99% of the people will overwrite you can just see as
a cmdline example

Best Regards,
J.

[PATCH 2/4] ODROID-X: dts: Add fixed-regulator for peripherals.

[Dongjin Kim]

This patch adds the node to support fixed voltage for peripherals like LED,
ethernet controller.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
---
 arch/arm/boot/dts/exynos4412-odroidx.dts |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 786ddd7..2d45dcb 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -49,4 +49,14 @@
 		pinctrl-names = "default";
 		status = "okay";
 	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 };
-- 
1.7.9.5

[PATCH 3/4] ODROID-X: dts: Add nodes for leds based on GPIO.

[Dongjin Kim]

This patch adds GPIO connected LEDS on ODROID-X board, and describe its
properties.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
---
 arch/arm/boot/dts/exynos4412-odroidx.dts |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 2d45dcb..3943011 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -59,4 +59,18 @@
 		enable-active-high;
 		regulator-boot-on;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
 };
-- 
1.7.9.5

[PATCH 4/4] ODROID-X: dts: Add mshc node for ODROID-X board

[Dongjin Kim]

Adding the device node to support eMMC storage on SDCARD4 ports, controlled by
Mobile Storage Host Controller.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
---
 arch/arm/boot/dts/exynos4412-odroidx.dts |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 3943011..fbd0b51 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -73,4 +73,25 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	mshc@12550000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpk0 0 3>, <&gpk0 1 3>,
+				<&gpk0 3 3>, <&gpk0 4 3>,
+				<&gpk0 5 3>, <&gpk0 6 3>,
+				<&gpk1 3 4>, <&gpk1 4 4>,
+				<&gpk1 5 4>, <&gpk1 6 4>;
+		};
+	};
 };
-- 
1.7.9.5

Re: [PATCH 4/4] ODROID-X: dts: Add mshc node for ODROID-X board

[Tomasz Figa]

Hi Dongjin,

On Tuesday 18 of December 2012 04:55:07 Dongjin Kim wrote:
> Adding the device node to support eMMC storage on SDCARD4 ports,
> controlled by Mobile Storage Host Controller.
> 
> Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> ---
>  arch/arm/boot/dts/exynos4412-odroidx.dts |   21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts
> b/arch/arm/boot/dts/exynos4412-odroidx.dts index 3943011..fbd0b51
> 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -73,4 +73,25 @@
>  			linux,default-trigger = "mmc0";
>  		};
>  	};
> +
> +	mshc@12550000 {
> +		num-slots = <1>;
> +		supports-highspeed;
> +		broken-cd;
> +		fifo-depth = <0x80>;
> +		card-detect-delay = <200>;
> +		samsung,dw-mshc-ciu-div = <3>;
> +		samsung,dw-mshc-sdr-timing = <2 3 3>;
> +		samsung,dw-mshc-ddr-timing = <1 2 3>;
> +
> +		slot@0 {
> +			reg = <0>;
> +			bus-width = <8>;
> +			gpios = <&gpk0 0 3>, <&gpk0 1 3>,
> +				<&gpk0 3 3>, <&gpk0 4 3>,
> +				<&gpk0 5 3>, <&gpk0 6 3>,
> +				<&gpk1 3 4>, <&gpk1 4 4>,
> +				<&gpk1 5 4>, <&gpk1 6 4>;

What is the gpios property for in this node? Pin configuration using 
legacy GPIO bindings is not supported anymore on Exynos4. Pin control 
bindings must be used.

Best regards,
Tomasz Figa