From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: iommu@lists.linux-foundation.org,
laurent.pinchart+renesas@ideasonboard.com,
geert+renesas@glider.be, joro@8bytes.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
horms+renesas@verge.net.au, robin.murphy@arm.com,
m.szyprowski@samsung.com
Subject: Re: [PATCH 04/04] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
Date: Thu, 17 Mar 2016 10:35 +0200 [thread overview]
Message-ID: <2373321.32gyXlL3CK@avalon> (raw)
In-Reply-To: <20160315170510.20615.16557.sendpatchset@little-apple>
Hi Magnus,
Thank you for the patch.
On Wednesday 16 March 2016 02:05:10 Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Introduce a new set of iommu_ops suitable for 64-bit ARM
> as well as 32-bit ARM when CONFIG_IOMMU_DMA=y. The ->of_xlate()
> callback is needed by the code exported by of_iommu.h and
> it is wrapped in #ifdefs to also compile of x86_64.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Nice work, thanks a lot. With the two comments below addressed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>
> drivers/iommu/ipmmu-vmsa.c | 94 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 92 insertions(+), 2 deletions(-)
>
> --- 0011/drivers/iommu/ipmmu-vmsa.c
> +++ work/drivers/iommu/ipmmu-vmsa.c 2016-03-16 01:35:06.990513000 +0900
> @@ -10,6 +10,7 @@
>
> #include <linux/bitmap.h>
> #include <linux/delay.h>
> +#include <linux/dma-iommu.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> #include <linux/export.h>
> @@ -804,7 +805,7 @@ static void ipmmu_remove_device(struct d
> dev->archdata.iommu = NULL;
> }
>
> -static const struct iommu_ops ipmmu_ops = {
> +static const struct iommu_ops __maybe_unused ipmmu_ops = {
> .domain_alloc = ipmmu_domain_alloc,
> .domain_free = ipmmu_domain_free,
> .attach_dev = ipmmu_attach_device,
> @@ -818,6 +819,92 @@ static const struct iommu_ops ipmmu_ops
> .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
> };
>
> +static struct iommu_domain *ipmmu_domain_alloc_dma(unsigned type)
> +{
> + struct iommu_domain *io_domain;
> +
> + if (type != IOMMU_DOMAIN_DMA)
> + return NULL;
> +
> + io_domain = __ipmmu_domain_alloc(type);
> + if (io_domain)
> + iommu_get_dma_cookie(io_domain);
> +
> + return io_domain;
> +}
> +
> +static void ipmmu_domain_free_dma(struct iommu_domain *io_domain)
> +{
> + iommu_put_dma_cookie(io_domain);
> + ipmmu_domain_free(io_domain);
> +}
> +
> +static int ipmmu_add_device_dma(struct device *dev)
> +{
> + struct iommu_group *group;
> +
> + /* only accept devices with iommus property */
Nitpicking, the driver capitalizes the first letter of the sentence in
comments and includes a period at the end. Could you please follow the same
style for consistency ?
> + if (of_count_phandle_with_args(dev->of_node, "iommus",
> + "#iommu-cells") < 0)
> + return -ENODEV;
Given that the iommu_group_get_for_dev() call will call the .device_group()
operation that ends up calling ipmmu_init_platform_device(), do we need this
check here ?
> + group = iommu_group_get_for_dev(dev);
> + if (IS_ERR(group))
> + return PTR_ERR(group);
> +
> + return 0;
> +}
> +
> +static void ipmmu_remove_device_dma(struct device *dev)
> +{
> + iommu_group_remove_device(dev);
> +}
> +
> +static struct iommu_group *ipmmu_device_group_dma(struct device *dev)
> +{
> + struct iommu_group *group;
> + int ret;
> +
> + group = generic_device_group(dev);
> + if (IS_ERR(group))
> + return group;
> +
> + ret = ipmmu_init_platform_device(dev, group);
> + if (ret) {
> + iommu_group_put(group);
> + group = ERR_PTR(ret);
> + }
> +
> + return group;
> +}
> +
> +#ifdef CONFIG_OF_IOMMU
> +static int ipmmu_of_xlate_dma(struct device *dev,
> + struct of_phandle_args *spec)
> +{
> + /* dummy callback to satisfy of_iommu_configure() */
> + return 0;
> +}
> +#endif
> +
> +static const struct iommu_ops __maybe_unused ipmmu_ops_dma = {
> + .domain_alloc = ipmmu_domain_alloc_dma,
> + .domain_free = ipmmu_domain_free_dma,
> + .attach_dev = ipmmu_attach_device,
> + .detach_dev = ipmmu_detach_device,
> + .map = ipmmu_map,
> + .unmap = ipmmu_unmap,
> + .map_sg = default_iommu_map_sg,
> + .iova_to_phys = ipmmu_iova_to_phys,
> + .add_device = ipmmu_add_device_dma,
> + .remove_device = ipmmu_remove_device_dma,
> + .device_group = ipmmu_device_group_dma,
> + .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
> +#ifdef CONFIG_OF_IOMMU
> + .of_xlate = ipmmu_of_xlate_dma,
> +#endif
> +};
> +
> /*
> ---------------------------------------------------------------------------
> -- * Probe/remove and init
> */
> @@ -929,14 +1016,17 @@ static struct platform_driver ipmmu_driv
>
> static int __init ipmmu_init(void)
> {
> + const struct iommu_ops *ops;
> int ret;
>
> ret = platform_driver_register(&ipmmu_driver);
> if (ret < 0)
> return ret;
>
> + ops = IS_ENABLED(CONFIG_IOMMU_DMA) ? &ipmmu_ops_dma : &ipmmu_ops;
> +
> if (!iommu_present(&platform_bus_type))
> - bus_set_iommu(&platform_bus_type, &ipmmu_ops);
> + bus_set_iommu(&platform_bus_type, ops);
>
> return 0;
> }
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2016-03-17 16:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 17:04 [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update Magnus Damm
2016-03-15 17:04 ` [PATCH 01/04] iommu/ipmmu-vmsa: 32-bit ARM may have CONFIG_IOMMU_DMA=y Magnus Damm
2016-03-15 17:04 ` [PATCH 02/04] iommu/ipmmu-vmsa: Break out utlb parsing code Magnus Damm
2016-03-15 17:05 ` [PATCH 03/04] iommu/ipmmu-vmsa: Break out domain allocation code Magnus Damm
2016-03-15 17:05 ` [PATCH 04/04] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops Magnus Damm
2016-03-17 8:35 ` Laurent Pinchart [this message]
2016-03-17 20:02 ` Robin Murphy
2016-03-17 8:22 ` [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update Laurent Pinchart
2016-04-05 14:02 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2373321.32gyXlL3CK@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=geert+renesas@glider.be \
--cc=horms+renesas@verge.net.au \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=magnus.damm@gmail.com \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox