Re: fsl-dcu not works on latest "drm-next"

[Alexander Stein <alexander.stein@systec-electronic.com>]

On Thursday 26 May 2016 08:23:42, Meng Yi wrote:
> Hi Mark,
> 
> > You've not specifically described the problem here - what are the
> > endiannesses of both the CPU and the device you're talking to?  What
> > specifically is the endianess problem you are seeing, what are you seeing
> > and what do you expect to see?
> 
> The CPU is little endian and the device DCU is big endian, specified
> big-endian in DTS,
> 
> And here is my DTS and regmap_config,
> 
> Specified "big-endian" in DTS,
> 
>         dcu: dcu@2ce0000 {
>             compatible = "fsl,ls1021a-dcu";
>             reg = <0x0 0x2ce0000 0x0 0x10000>;
>             interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
>             clocks = <&platform_clk 0>;
>             clock-names = "dcu";
>             big-endian;
>             status = "disabled";
>         };
> 
> I can't tell the difference of "reg_format_endian" and " val_format_endian
> ", so I had tried four conditions. And all failed.
> 
> static const struct regmap_config fsl_dcu_regmap_config = {
>     .reg_bits = 32,
>     .reg_stride = 4,
>     .val_bits = 32,
>     .cache_type = REGCACHE_RBTREE,

This needs to be a flat cache. See https://lists.freedesktop.org/archives/dri-devel/2016-January/099121.html or https://lkml.org/lkml/2016/3/24/281
max_register also needs an appropriate value.

> //  .reg_format_endian = REGMAP_ENDIAN_BIG, //  .val_format_endian =
> REGMAP_ENDIAN_BIG,
> 
>     .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
> 
> 
> I expect that regmap write as big endian, and I am seeing is regmap write as
> little endian.

Check your actual regmap reg_write function.

Best regards,
Alexander